10 Questions Omni - RAM, USB and case

Similar Questions

• Satellite A100 PSAARA - Questions about RAM, VGA and BIOS

  I used Toshiba Satellite A100 PSAARA, now I have a few questions:

  1. I have updated the BIOS for my laptop (new version 6.0 to version 5.10): everything seems to work ok, but after I rebooted the laptop, it automatically connect a black screen with these warning "checksum bad sectors, F1: default settings, F2:..." (remember exactly).
  I pressed F1, my Toshiba reboot works ok after that, so there's something wrong with this warning?

  2. I upgraded RAM to 2 GB (1 GB + 1 GB) with the KingMax brand, if the RAM expandable max I can do on my laptop?

  3. This Toshiba laptop use to edge or video card, I check my Nvidia geforce card real estate (laptop) and I saw this: memory: 256 MB + RAM shared memory: 256 MB = 512 MB of total memory?
  So: can I upgrade my card graph and maximum card that I can use?

  4. I cannot set 75 Hz for refresh monitor, can see 65 Hz

  Thanks for your help!

  1. try to load the default settings in the BIOS. Then it should work.

  2. the Satellite A100 supports 4 GB max.

  3. No, the graphics card can not be changed. It s soldered on the motherboard and cannot be exchanged.

  4. what internal or external monitor? Monitor internal and other s LCD works best with 60 Hz.

• RAM, T440p and CASE latency compatibility

  I read in a review of the p 440 also the user has indicated that the default value of RAM expedition in his device was DDR3 12800 CASE 11-11-11-28 at 1.35 volts.

  There is a beautiful Black Friday process on the part of 9-9-9-28, and I wonder if there is any compatibility problem in getting that.

  No problem

• Satellite Pro A100: Question about RAM upgrade and warranty

  I just bought my machine and Ive decided to install some more ram. No one knows if it will affect my Gurentee. I can't find anything on the Web site on this topic. Should I get a Toshiba to install official repairman or something?
  Thank you

  Hello

  Please check you user manual. Usually, the slot memory must be placed at the bottom of the unit. If you remove the cover, you should see the slots.
  Usually memory upgrade procedure is described in the user manual so you can upgrade the memory yourself and the procedure of upgrading doesn t affect your warranty.
  But please make sure you use the right modules.
  However, you can also contact Toshiba for the upgrade of memory.

• RAM frequency and latency CASE

  So, in my bench, before having card problems mother, specs looked like this:

  5960 x CPU @3. 0 GHZ

  H105 Corsair cooler

  32 GB 2133 MHz DDR4 Crucial RAM

  MSI Gaming X99S 7 motherboard

  2 x NVIDIA GTX 970 s

  Pro SSD 256 GB Samsung 850 (start, Drive program) (SATA III)

  SSD Pro 1 TB GB Samsung 850 (Media (film Source of the layer), Cache media, preview the files, the export drive) (SATA III)

  Thermaltake 1000W PSU gold

  Once this motherboard died without apparent reason, the specifications changed a bit.  Everything remained the same, with the exception of the motherboard and RAM:

  ASUS X 99 Deluxe 3.1 Motherboard USB

  64GB 2666 MHz DDR4 Corsair Vengeance RAM.

  Now, all those who have used After Effects, they always say that 64GB will be substantially greater than 32 GB; I understand that.  However, what interests me about is the following:

  1. Is the frequency of the RAM-mark a difference in After Effects?  I'm not overclocking my CPU because of some experiences and big problems in the past, so I don't know if there is a difference between 2133 MHz and 2666 MHz.
  2. Latency case means anything in After Effects?  The old RAM Crucial was latency of 15 cases, while the Corsair vengeance RAM is 16 cases of latency.  I don't know what that means in terms of performance anywhere.

  So, basically, are either two things, I mentioned above will have a difference?  I know that 64 GB will be, but what about the frequency or latency case?  I don't have my machine back yet, so I could not test these things for me.

  I heard it is recommended to put your cache on a separate disc of your source media.

  I doubt you will notice a lot of difference in the performance of EI between both types of RAM that you mentioned.

• Satellite A100-003: Question about RAM and recording model number

  Dear Sir/Madam,

  1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G

  2. Another problem is the European website of Toshiba and Turkey Toshiba official site (http://www.toshibatr.com/notebook_filter.asp?ktg=A100) says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "

  http://img510.imageshack.us/my.php?image=satellitea100003xg4.jpg

  I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.

  Thank you for helping me,
  Halin

  Hello

  First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
  Don t worry, register just she.

  With regard to the RAM:

  Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.

  In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
  CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.

  I hope I could explain something to you. ;)

  Have a nice weekend

• How to open and close an electronic shutter with LabView 8.5.1 using an NI USB-6009 case?

  Also, I need to set up a timer so that the shutter is open for 15 minutes and closed for 30 minutes.  It has to do 500 times.

  The USB-6009 case is a relatively new device, and LabVIEW 8.5.1 is a fairly old software. You should check to be sure that you have the corresponding to your version of LabVIEW (DAQmx) drivers that support of this material. It sounds as if you put it in place to MAX and control the output manually, which is a good sign. I don't have access to the version 8.5.1 and I do not exactly remember which functions he supported, but the attached picture shows a simple diagram in a new version of LabVIEW that would do what you want. Of course, you should test with shorter and less iterations because it takes more than 2 weeks to complete! Add any controls, indicators and the error checking you want.

  Rich

• so many questions: no sound, cannot use USB and dongle...

  I have a toshiba satellite l505d-gs6000... I have installed the latest updates for my computer stop for the night he opened in the morning and I have no sound, unable to use USB and dongle... I restored an hour earlier and who fixed it, I have re installed windows os and it does not solve it... the drivers on my sound it's updated but also when I click on its screen it says: no audio output device is installed:

  Hello Jason, I've done a little reading on your laptop model, it seems, there is a hardware problem with this range of laptop, which causes the USB and sound to fail. There is no known for this hotfix.

  Check out this thread of Toshiba... http://forums.Toshiba.com/T5/audio-sound/no-sound-USB-on-satellite-L505D-gs6000/TD-p/172564/page/8 
  You will need to contact Toshiba customer service if your laptop is under warranty.
  Find a Toshiba Service Center

• Protégé M200: Question about Vista TPM and the Bitlocker

  You want to know if I have a TPM chip to launch bitblocker on the M200 using Vista. Just call Toshiba Technical Support - the guy was totally distraught!

  If I don't have a TPM chip, then I can install it?

  Hello

  It is a good question. To my knowledge the Portege M200 does not support TPM but the Portege M400, R400 module and the R200

  But the Bitlocker, which is only available on the Vista Enterprise and ultimate can also be used without the TPM chip but then some functions are not available; for example, the SecureBoot.
  Without TPM only the OS volume encryption is available.
  In this case you can encrypts the entire Windows volume including both data and file system user, the file of hibernation, the page file and the temporary files.

  Using volume of BONE (HDD) encryption an encryption key will be generated. This key will be written to the USB and then the USB is required!

  AFAIK the Bitlocker requires 2 partitions. A partition must be created as needs at least 50 MB primary partition. I recommend a? about 1.5 GB
  The second big partition Vista can be installed.

  After the installation of Vista the Bitlocker must be enabled in Group Policy (units without secure TPM). This can be done using the command 'gpedit '.
  And then under models of administration-> windows components-> Bitlocker bitlocker function can be activated!

  Anyway, there is much information Bitlocker and I think you should also consult the Microsoft Web site for more information:
  BitLocker Windows Drive Encryption step-by-step guide

  I hope I could help a little

• multi channels data acquisition, a single frequency, counter a pulse, two voltage inputs, a power meter (by USB) and an analog output spontaneous and recording

  Hello

  I have a power meter which provide the USB driver and a Labview program to get the data and NI USB-6221. The project I am currently working on the needs of:

  1 acquire two signals (inputs of simple tension), pressure frequency KHz

  2. acquire a flow signal, the output signal is 0 to 5V pulse, each pulse means 0.4 ml volume. So I use a voltage inflows to count impulses in certain period of time (in this case, 1 S) for water flow. ; KHz sampling frequency and the 1 Hz update rate

  3. acquire a signal of engine speed. The output signal is pulse square wave whose frequency is related to the speed. I use a REIT port to measure the frequency. Sampling rate: Auto

  4 give output voltage sine or square wave, I use AO do that.output rate: Auto

  5 acquiring by VISA electricity meter data.  Data update rate: every 50ms

  Currently, all the 5 tasks work well separately. But when I put them together, some signals are beginning to hang, for example, pressure signals sometimes give nothing.

  Another problem is the data record. I programmed the VI in such a way that whenever I press the button 'save start', he begins to record data and save them in a .cvs file. For some reason, I always get only the data in the first table. Coult someone help me? I download my code as follows

  Hello

  What I meant by open, write, close.  For any type of file you are using.

  Open the file, which produces a reference, then put the mention in a registry to offset.

  Write data, using the function write (for this type of file) and the reference.

  When you are finished, close the file reference.

  Writing in the spreadsheet opens, written, close all at once.  It is very good for this type of application.

  ***

  The issue of the loop is more general.  I would like to say first of all, I want to say that since each loop works on its own, it is own VI, and that this program has put all this into a single VI, which has a method to solve the problem is to disable all the loops and allow them one at a time to see if there is a culprit responsible for.

  Using multiple loops executes the code at the same time, and some loops would be cycle faster than others, especially if some of them are loops just as they are.

  Communication between the loops is a test to the address if necessary.

  Running all these signals through different loops DAQ must also be examined.  Don't know what questions are for read and write somewhat randomly in the channels.

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• Tecra R850 - 147 - Question about RAM

  Hello.
  What type RAM and SELLER od are installed on Toshiba Tecra R850 - 147 (Samsung? Kingston? OCZ? .... ? )

  concerning
  p.

  Remove the RAM cover and check which modules are inside. It is fixed with two screws.
  You don't need more than two minutes to know who is the manufacturer of RAM.
  In any case I think he'd be Hynix or Samsung.

• RAM upgrade and Satellite A200 - 19K graphic card memory:

  Hi all

  The Satellite A200 - 19K came with 1024 MB memory system. It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop? I would like to add another a 1024 MB of RAM, is that the slot more be available?

  The second question is on the graphics card from NVIDIA. The product specification mentions the graphics adapter as below...

  Manufacturer: NVIDIAî
  type: NVIDIAî Geforcea? ¢ GB 7300 supporting Turbocachea? ¢ technology
  memory: 64 MB dedicated VRAM (up to 335 MB of total available graphics memory using Turbocachea? ¢ technology with 2 GB of system memory)
  memory type: DDR video RAM (resp. video RAM DDR and DDR system memory combined)
  connected bus: PCI Express 16 x

  My question is, after upgrade from 1024 MB to 2048 MB system memory, is that the card NVIDIA GeForce will be automatic upgrade from 64 MB to 256 MB for graphics memory?

  TAHNKS A LOT!

  Hello
  >, It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop
  I think that the laptop came with a module of memory 1 GB and the second Bank should be free.

  Now something about the graphics card.
  Well, the graphics card GeForce Go 7300 supports own graphics memory 256 MB (no shared memory!)
  But it also allows a dedicated memory.
  This amount of memory is variable and depends on the available main memory.

  I think that everything runs automatically and you will not need to change the settings to assign this memory dedicated after main memory upgrade

• How to configure the PFI0 terminal on the USB-6009 case as came event counter

  I'm watching the 8 inputs on the USB-6009 case and when fires Terminal PFI0 start saving the data.

  Y at - it and why to read the 8 inputs while monitoring the PFI0 terminal? I appreciate any help!

  Hi yacs1,

  You can certainly do.  I assume that you already have your 8 entries read correctly.  Everything you have to do is now to put a statement button in your loop that is controlled by your pfi0 line.  If this line is high, then save the data, if it's low, then only display data of your control.  If you need help reading the pfi line, open finder example under help > find examples.  Then go to the material input and output, reading Dig channel DAQmx, numerical measures.  If you need help logging data, go in Fundamentals, file input and output, and then depending on what type of file you want to write to, find the appropriate example (IE write into text file).

  Let us know if you need more assistance,

  Ryan

  Technical sales engineer

• ScanJet g4010: do not install scanjet following usb and usb-hardware driver issue?

  Hello

  I tried to install the scan of a brand new computer and encountered the following problem:

  I downloaded the package of appropriate software (full software and driver) from HP Web site, I start to install and get a message after the first stage (verification of the system requirements). the specific question that the system doesn't have the support of USB-required to complete software installation USB + same question regarding the USB hardware...

  strange because it is a whole new system, and none of the other USB devices have no problem at all... (this happens even without/before plug in the device to scan..)

  I also made an update of the Bios and checked if all USB ports are active and enabled in the Bios, no problem...

  System = dell optiplex 5040, windows 7 Professional 64 bit

  any ideas?

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi