Question "writes metadata XMP was not entirely successful.

Similar Questions

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows backup fails with the error "the last backup was not entirely successful.

  Original title: baclup fails

  I've repeatedly tried to back up my Win 7 files. I turned off check virus and Internet.  The only message I get back is "the last backup haven't successfully' information plus button just translates to"try again ".

  Hey Joe,

  (a) did you get an error with this error code?

  (b) do you remember to make changes on the computer before the show?

  This could be the shadow copy Volume service, and SPP services are not started.

  To restart the Volume Shadow Copy service and the services of the SPP. You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. If the SPP function is disabled, double-click it to open the service properties.
  4. If the Volume Shadow Copy service is double-click on it to open the service properties
  5. click on the startup type list, click Automatic (delayed start), and then click on apply.
  6. under the service status, click Start.

  If the problem persists, follow the steps in troubleshooting section and check if that helps:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Hope this helps, if you need help on windows let us know we will be happy to help you.

• It's my mistake, the system cannot find the specified file 0 x 80070002 back up was not entirely successful. __

  I tried the previous suggestions of verification of the user profiiles & they are all complete, any other ideas? the last time it was saved was on March 21, 2010.

  I have a Windows Vista, AMD Athlon 64 x 2, 320 GB HD & 500 GB upwards on fi car attempted to run several times but nothing works, any suggestion would be appreciated.

  Billbo2010,

  Take a look at this thread resolved about the same error:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/65b8f01d-F9BA-45AD-b0e6-c5ef5c775f77

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0x800704D3 error: the backup was not completely successful. The application has been abandoned, as he tried to take backup

  Original tile: appeared at the end of backup when the error message appeared. "The reverse was not entirely successful. The request was abandoned. (0x800704D3)

  Recently I had a problem with the combo of virus/malware.  Antivirus 2010, was then brought by an another 'guru' to download StopZilla.com who started the Delete files accompanying the computor.  I have kept and can't get rid of the problem, so decided to back up files, and then put in recovery disks.  Appeared at the end of backup files with the ninth disk, when the error message above has occurred. Is not something else.  Someone said elsewhere "make sure that the AC adapter is on"... what?  THA is the problem?

  Seen also it is suggested to get an external hardware, but what about hang the laptop to existing pc?  Would you do that?  What wiring do I need?

  Hi beltwaytraveler,

  1. you have any third-party backup program installed?

  2 have you tried to use a different backup disk?

  Method 1:

  You can temporarily uninstall third-party anti-virus on your computer protection software and then check if the problem occurs.

  Note: Be sure to install the security software on the computer after you fix the problem.

  Method 2:

  You can also try to uninstall any third-party backup program installed on the computer and try the backup.

  Method 3:

  You try to run the following command and check if all third-party services are running other Microsoft services.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:

  vssadmin list writers

  c. check the VSS writers listed.

  If you see any third-party service other than Microsoft services running, and then let us know about it.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• USB device not recognized / 43/pilot error was not installed successfully.

  Original title:

  Joystick USB problem

  My USB Joystick worked great so far (2 days since purchased) but it suddenly stop working.
  Computer display error:

  USB device not recognized / 43/pilot error was not installed successfully.

  I tried the Solution as re install disk, unplug the power cords, restart the PC, etc., still does not.

  Also another thing is, it does not work in other PC also and

  Please help if anyone knows. Thank you.

  (Moved from Gaming)

  Hello

  Refer to the steps in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-controller-code-43-error/1006b7b6-E663-4175-b30a-4dcd91e17c5e

• Modification of metadata XMP do not alter the document

  Another issues couple that has accumulated over time.

  If I change the layer in the document by adding or updating the XMP metadata, the document itself is not changed (not active not saving), so far if the document is closed without making another action that document such brands as amended, the data is lost.

  Question: How is force document to view changes in the XMP metadata or how to mark the amended document?

  Code snippet:

  activeDocument.activeLayer.xmpMetadata.rawData = meta.serialize ();

  Thank you

  Petr-

  Hi Peter,

  We have a bug open against Photoshop for that matter, but in the meantime, you can use this workaround:

  app.activeDocument.activeLayer.visible = app.activeDocument.activeLayer.visible

  Zak

• I get the message "format was not completed successfully" when trying to format my USB through "Computer management"

  ---------------------------

  Virtual Disk Manager

  ---------------------------

  The format failed.

  ---------------------------

  Ok

  ---------------------------

  Hello
   
  1. What is the number of brand and model of the flash player?
   
  Some brands of car pen have formatting tools. You can visit their website and use as appropriate.
   
  2. you are formatting in NTFS or FAT32?
   
  If it is NTFS, you must restart your computer after format.
   
  Follow the steps mentioned below and check if it works to solve the problem.
   
  Note: Please back up your data before formatting your USB
   
  Step 1:
   
  First of all, try formatting in safe mode
   
  Step 2:
   
  a. open a DOS command prompt (start > run > type "cmd") and type:
  attrib - r h - s. x:\*.*/s
   
  This will change the attributes of all files on the USB key. Read-only, hidden and system attributes will be deleted.
   
  b. replace X: with the drive letter of your USB. Now, you will be able to see them in Solution Explorer and remove them, without anything shaped.
   
  Step 3:
   
  Format it with DOS commands
   
  a. open the DOS command prompt (start > run > type "cmd" in the box)
  b. type:
  X: FORMAT FAT32/q / V: PenDrive
  This will reformat the Flash DRIVE using the FAT32 file system and label the USB key drive. Replace x with the actual drive letter of your USB drive. For more help on this command, type:
  FORMAT /?
  at the command prompt.
   
  Step 4:
   
  There could be a virus that can stop your pen drive formatting. I wish that you run a virus champagne using your security once software before trying new format.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• backup was not completely successful error (0 x 81000002)

  Hi, I didn't anywhere online no chance.
  Running Vista business and have backup running weekly at least 2 years now and this week I got this error.

  "An error has occurred. The following information can help you to resolve the error:
  The backup location is not available. Review your backup and restore settings and check your hardware configuration. (0 x 81000002)"

  Vista backup can't detect my secondary drive now, but I can always access to and use the files on this disc. It's a drive SATA with at least 100 GB of free space remains available.

  Thank you
  Edmond

  Hi ed202d.

  What happens if you go to disk management (right click computer, right-click Manage) and change the drive letter to a different letter?  To do this right click on the partition and select change driver letter and paths.

  Also check the security on the road - for this, right click on the drive, then go to properties, security.  For testing purposes, please add the user "Everyone" and give Everone all permissions on the drive.

  -Thank you

• The backup was not completely successful: code 0 x 81000006.

  Original title: Back is a failure.

  My laptop has never been great, but now is running out so regularly it is tedious. I have the chance to completely clean, install Win 7 and pop as my media files back on.

  However! I just tried to make a comeback to the top and get it

  The backup has failed

  blah blah blah

  code 0 x 81000006

  And yes I have turned everything off and back on again. :)

  Hello

  Step 1: Check if the backup and restore services are started and their situation is correct. To do this, follow these steps.

  (a) log-in as administrator.

  (b) click Start, type services.msc and press to enter.

  (c) in the list of items, double click: backup Windows and Volume shadow copy services.

  (d) define their startup type to automatic and start the service.

  (e) to apply the changes.

  Step 2: Run the disk check to find and fix errors on the disc.

  1. Click Start, type cmd, right-click on cmd, and then click Run as administrator.

  2. at the prompt, type chkdsk /f /r and press to enter.

  3. try to backup and check the result.

  For more information on 'Check a drive for errors' visit this link: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors

  Note: For security, try to manually back up data before a disk check.

  For more information on 'backup of your files' visit this link: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I often get in a loop when creating a projector.  Something causes error dialog boxes saying that a supplement is either missing or was not initialized successfully. What causes this?

  Director 11.59 and 12 I get error dialog boxes when I run a movie who say, ' additional text is either missing or does not initialize properly.  No matter what I do with the text Xtra, it does not affect the problem one way or another. Is this a known issue?  How can I fix it?

  Thanks to anyone who can help me.

  Dewey

  Hello Dewey,

  You see this error message when...

  1 # when you try to run a Director published the projection file (either a windows. EXE, or a mac file. File APP)?

  OR

  2 # when you load a .dir file into Director for programming?

  If it's the number 1 #-then you will need to link your xtras in your projection file.

  See the tabs along the top of the screen of the Director (less change & file)

  Modify > movie > xtras > TextXtra PPC (included in the projector - is checked)

  file > publishing settings > files (make sure exclude all xtras is NOT checked)

  If it's number # 2 - so you can have two copies of the xtra text inside your configuration/xtras folder (but it's not likely)

  (* if you try to make an iOS app - then text xtra doesn't either)

  concerning

  Milky

• I'm trying now for more than a week download the trial version of photoshop and was not yet success

  I'm trying now for more than a week download the trial version of photoshop and has always failed

  Well, since Yes provided no information system or any other information, you can try as well for another week. We know nothing about your operating system, the browser you use, what network connection and so on. Start here:

  Direct download links for Adobe software

  Adobe Download Troubleshooting Wizard

  Mylenium

• Error: ""format has not completed successfully.

  I have a Western Digital 2 TB hd that won't format with the error next message ' 'format was not entirely successful.

  1. my bios update and see it as 2 TB.

  2. I have Vista sp2

  3. I received the same error with a disc of 2 TB hitachi last week, so I went back the hitachi and bought a wd.

  4. when I tried a long format, it ends at 54%, which seems to be a common problem when searching the Internet, but I couldn't find a solution.

  Any useful help?

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/17f887ee-7689-4DC3-9237-ee7f3af2dfbd

• WIN 7 backup has not been successful.

  Original title: WHEN is it SAFE TO SAVE DATA ~ WIN 7

  Twice immediately after a backup of my data in Win 7, I get messages that my Back-up cannot be entirely refunded.

  My apologies ~ I do not remember the exact legends but they indicate that my backups were not entirely successful.

  1. after a system restore

  2. after having Defraggling the computer.

  Is there a period of time, after which, if I run backups, that these messages can be avoided?

  Windows7 64-bit

  Thank you.

  Rajdeep.

  Rajdeep salvation,

  Yes, it could be the Piriform Defraggler which is to detach the restore points. Error or the events in the event viewer (Volsnap could not develop because of a user input) also happen when there was not enough disk space in the box Diff for Volume Shadow Service take a snapshot. Due to lack of disk space in the Diff area, the operating system automatically deleted the snapshot taken.

  Check out the link to increase the Volume Shadow-diff area and check if it solves the problem:

  http://TechNet.Microsoft.com/en-us/library/dd364636 (v = ws.10) .aspx

  Also, try to uninstall Piriform Defraggler and check if you still receive the error message.

  For reference:

  Run a check disk operation to see if there are bad sectors on the disk at the origin of this problem. Check out the link to run the tool:

  http://support.Microsoft.com/kb/2641432/en-us

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Please keep us informed.

• Upgrade to Android 6 not a success - UEUpdateFailed

  Today I received the message that version 6 has been available for my phone (Z3C).

  I was so happy that I started my PC started the companion Xperia and connected the phone. Indeed, there was a new version for my phone!

  I did what was asked and kept my fingers crossed.

  Nevermind the message appeared that 'something went wrong '...

  Error code: UEUpdateFailed

  CompanionUE 3830

  I did what was suggested: run the repair tool.

  But it was not as successful.

  Housing starts of with the start screen Sony phone and will remain for always on this screen.

  With the power button and the Volume up, the phone turns off with 3 vibrations.

  What should I do now?

  Today, I'll be back on the phone since the Sony repair center. Under warranty, the phone has been reflashed with Android 6.0.1.

  Build 23.5.A.0.570

  What the trick was, used by the service center is unknown to me. But I have a working phone again