I get the message "format was not completed successfully" when trying to format my USB through "Computer management"

Similar Questions

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Get the message: "You must use this file" when trying to compress the files saved on the desktop

  Original title: to compress my files that I have saved on my desktop.

  I get this error after I do a right-click and "send to" compress a file...

  "you must use this folder.

  So, what should I do?

  Hi thegardengrand,

  This happens usually if all files in the folder or the folder is used by all programs that are running in windows.

  You can check if it is used by another program, then that and close then try to zip.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to format the memory card, I get the message "windows could not format.

  Original title: car micro sd problem
  
  Hello
  my laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.
  to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.
  PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.

  Hello

  You are able to use any other memory card with no problems on the same computer?

  Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.

• {I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll

  {I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll the specified module could not be found.

  This happens every time I restart the computer.  I tried to uninstall and reinstall Google Chrome which is the only Google on the computer.  It did not help, I still have the problem.

  Hello
   
  It seems that you receive an error message at startup 'there was a problem starting.
  C:\Users\jbondjbond\AppData\Local\Google\[F068CFE0-714C-455F-8=A56-F54EE47CB100]\qfjcfre.dll. The specified module could not be found. ».
   
  -What operating system is installed on your computer?
  -Do you have Google products installed on your computer? (Picasa, in car)
  -Did you do changes on the computer before this problem?
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• How can I reinstall Photoshop CS6 on my new computer when to enter my KEY I continually get the message "you are not connected to internet?

  I bought a new computer. I reinstalled my Photoshop CS6 leave a DVD, but when I entered the serial number I get the message "you are not connected to internet" while I was.  I have "pussy" with Naveen on customer support and after 20 minutes he told me to go to the following link and reinstall through it: http://www.adobe.com/sea/downloads/other-downloads.html

  
  

  This led to the same exact scenario only it took me over 2 hours to download CS6. I then contacted the 'Support Portal online' to ask for additional help. It was 2 days ago and I still have to be contacted and assisted with my problem. Any help or ideas out there?

  Here is what is in the file "hosts":

  127.0.0.1 localhost

  127.0.0.1 activate.adobe.com

  127.0.0.1 practivate.adobe.com

  127.0.0.1 ereg.adobe.com

  127.0.0.1 activate.wip3.adobe.com

  127.0.0.1 wip3.adobe.com

  127.0.0.1 3dns - 3.adobe.com

  127.0.0.1 3dns - 2.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  127.0.0.1 ereg.wip3.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 wwis-dubc1 - vip60.adobe.com

  127.0.0.1 activate - sjc0.adobe.com

  127.0.0.1 lm.licenses.adobe.com

  127.0.0.1 192.150.14.69

  127.0.0.1 192.150.18.101

  127.0.0.1 192.150.18.108

  127.0.0.1 192.150.22.40

  127.0.0.1 192.150.8.100

  127.0.0.1 192.150.8.118

  127.0.0.1 209-34-83 - 73.ood.opsource .net

  127.0.0.1 3dns - 1.adobe.com

  127.0.0.1 3dns - 4.adobe.com

  127.0.0.1 3dns.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 activate.wip.adobe.com

  127.0.0.1 activate.wip1.adobe.com

  127.0.0.1 activate.wip2.adobe.com

  127.0.0.1 activate.wip4.adobe.com

  127.0.0.1 adobe-dns - 1.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  127.0.0.1 adobe-dns - 4.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe.activate.com

  127.0.0.1 adobeereg.com

  127.0.0.1 crl.verisign.net

  127.0.0.1 ereg.wip.adobe.com

  127.0.0.1 ereg.wip1.adobe.com

  127.0.0.1 ereg.wip2.adobe.com

  127.0.0.1 ereg.wip3.adobe.com

  127.0.0.1 ereg.wip4.adobe.com

  127.0.0.1 hl2rcv.adobe.com

  127.0.0.1 ood.opsource.net

  127.0.0.1 practivate.adobe.ipp

  127.0.0.1 practivate.adobe.newoa

  127.0.0.1 practivate.adobe.ntp

  127.0.0.1 tss-geotrust - crl.thawte.com

  127.0.0.1 wip.adobe.com

  127.0.0.1 wip1.adobe.com

  127.0.0.1 wip2.adobe.com

  127.0.0.1 wip3.adobe.com

  127.0.0.1 wip4.adobe.com

• I get the message: firefox does not when I try to browse the web sites

  For some time now, when I load a web site, it takes a long time to load and then I get the message: firefox does not, or long-running script and does not. This occurs on many web sites, and when that happens, it takes a long time to browse this web site. I also have this problem on other browsers. Any suggestions as to what might help? Thank you.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then "Claire recent history...". ».

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!

  Thank you.

• I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

  I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

  I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

  =================================
  If it is a recent issue, of what it may be worth trying
  do a restore of the system at a time before everything started.

  See the following article:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

• Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

  Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

  Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

  Hello

   
  You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
   
   

• When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible

  When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?

  Hello

  Follow these steps to solve the problem.

  
  Step 1
  a. Click Start, default programs
  b. Click set your default programs
  c. Select your browser from the list
  d. Click set this program as default
  e. click OK.

  Then proceed as follows:

  
  Step 2
  a. click settings by default access and computer program Set
  b. click on continue if you see the user account control prompt.
  c. click Customize
  d. Select your browser from the list
  e. click OK.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I get the message BDUIsui.dll not found

  original title: Dll not found

  When I start my laptop (Windows Vista Ultimate) I get the message BDUIsui.dll not found (specific module could not be found) is that important?

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

  Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

  Follow these steps, Editor does not start | Mac App Store version

• I get the message "there was a problem opening your file" when I try to move an image from my Mac PSE9. This happens even with the pictures I imported to PSE before 9. I use Mac OS 10.10.5?

  Why do I get the message "there was a problem opening drop you off", when I try to import an image to the form of PES 9 photos on my Mac running Mac OS 10.10.5, even if this image was imported before?

  Move the thread to Photoshop Elements

• When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.