Questions about event log

Similar Questions

• New in AS3: stupid question about event listeners...

  Hi all

  I am a newbie in Flash and have a question about event listeners. I have a site I'm developing with a movie clip navigation which is composed of several buttons. What is the right way to write the event listener?

  Here's a sample of what I have:

  I have a clip called 'buttons_mc' that contains the symbols of individual button with various names such as "btn_history". So far, I don't have an instance name for the clip of the film itself.

  My event listener:

  btn_history.addEventListener (MouseEvent.CLICK, history);

  I have to put something before the "btn_history" which refers to the video? I get this error message:

  1120: access of undefined property btn_history.

  Thank you!!!

  Julia

  Yes, it is preferable to have at least one layer dedicated to actionscript.  I often use a couple... one for code shared (functions and variables) and a level of the frame code (stop(), etc.).

  The code must be in a scenario where the button is directly accessible.  If your button is accessible in frame 1, which means that it does not animate in place such that it is not really intended to be used until you get somewhere near the bottom of the timeline, then you can target the button of the timeline that holds the buttons_mc movieclip.  So as I described earlier, if you give this movieclip an instance name of "buttons", and then to assign a code to the button on the inside you should use...

  Buttons.btn_history.addEventListener (MouseEvent.CLICK, history);

  But if the button exists somewhere down the timeline inside the buttons_mc due to the animation of the button, which means that there is more than one key image for the button, then you must place the code that you have initially shown in the last keyframe to the bottom of the timeline where he set the button in place.

  .

• Basic questions about events

  1 can explain the basic need of a start point event? And how it works with two processes?

  I heard that he used to invoke (initiate) another process in the case of an event. In this case how it is differ from chained process (IE subprocesses ARE)?

  Thank you

  Nith

  "I heard that he used to invoke (initiate) another process in the case of an event"

  That is right.

  "In this case how it is differ from the chained process (IE subprocesses ARE)?

  It is similar, but yet others.

  With the chained process, you decide when you call the sub-process by adding a step in your process. But sometimes, you don't want to add a step to the process. You want to rely on an event of lifted from somewhere.

  The event can be lifted by one step in the current process. For example if you use the service to the user, you can intercept the OnDeadline event and then start a new process when a delay occurs. You can do that with a chained, process because the element is not really completed yet the user stage.

  Sometimes, you need to catch an event that does not come from your process at all. For example, LC rights management can raise an event when a document is viewed in Acrobat. With the event, you can start a process when this happens.

  Jasmine

• Need help with 6 33 sidebyside event log error questions

  I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information:

  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = AMD64
  CultureFallBacks = en-US; en
  ManifestPath = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll
  AssemblyDirectory = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\
  Application configuration file =
  -----------------
  INFO: Parsing file manifest C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll.
  INFO: Manifest definition identity is shfusion, processorArchitecture = "X 86", publicKeyToken = "000000000000000", type = "win32", version = "1.0.0.0".
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\amd64_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_09bcb209fad07c27.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC80.CRT.mui, language = "*" processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50727.4016".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Parsing file manifest C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest definition identity is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Activation context Creation succeeded.
  End activation context generation.

  The installation of windows vista has been very successful... Thank you!  I did a factory restore... had some conflicts and massive updates to do.  Problem was trying to do updates, especially for pilots, before the accidents that happen.  I managed to do it.  The only questions I could solve just not have been SidebySides mistakes.

  Thanks to YOUR INSTRUCTIONS FANTASTIC all sidebyside errors are now missing from event viewer. :)

  In case you might be interested, here's the historical data for net framework cleanup tool:
  History of changes
  -------------------

  December 3, 2007 - created the history file; any changes made before the creation
  This file is followed.

  December 4, 2007 - additions of extra cleaning for all versions of the .NET
  Framework on Tablet PC / Media Center, all versions of the
  .NET framework on Windows Server 2003, and all versions of the
  .NET framework on Windows Vista / Windows Server 2008.

  January 23, 2008 - addition of registry values to remove .NET Framework 1.0
  and 1.1 patches that were previously left out.

  29 January 2008 - addition of the product codes for .NET Framework 2.0 SP1, 3.0 SP1, and 3.5
  RTM versions.  Added a few 3.0 and 3.5 directories that have been
  already be left on the system.

  February 4, 2008 - added the cleanup who were initially registered on jobs
  December 4, 2007, but was inadvertently deleted.

  March 5, 2008 - fixed problem of deletion of registry which may affect 64-bit operating systems.

  March 6, 2008 - fixed an error of advapi32.dll on some caused by the previous operating systems
  Difficulty.

  April 30, 2008 - codes added product .NET Framework 3.0 beta to the list of
  items to remove during cleanup of .NET Framework 3.0.

  June 5, 2008 - corrected a problem with recovery of the Windows directory
  systems with active Terminal Server Services.

  June 6, 2008 - adding a /u switch to allow to run in unattended mode (which
  Displays the progress page but no other Interface and will require
  no user intervention).

  June 9, 2008 - disable the readme file and log file buttons if the tool is underway
  run in unattended mode.

  July 22, 2008 - added logging for detection of version of .NET Framework.  Update
  the tool to set the title of the window in cleanup.ini.

  August 14, 2008 - added support for the .NET Framework 2.0 SP2, .NET Framework
  3.0 SP2 and .NET Framework 3.5 SP1.

  November 26, 2008 - fixed a logic problem that caused the cleaning tool for not
  Delete the values to register 32-bit on Windows 64-bit versions.

  December 22, 2008 - added the version string is added to the log file.

  July 24, 2009 - added logic to properly clean the .NET Framework
  Windows 7.
  Added detection and logging for the .NET Framework 4.
  Avoid cleaning of mscoree.dll on Vista and higher.

  October 27, 2009 - fixed problem of withdrawal associated with VC ++ runtime files on Win9x
  and Windows 2000.

  October 29, 2009 - fixed problem of withdrawal associated with runtime files in VC ++ in the
  %WINDIR%\WinSxS directory on some operating systems.

  November 30, 2009 - fixed some problems of deletion of registry values that control which
  products appear in Add/Remove programs.

  December 9, 2009 - added logic to treat some types of errors and warnings if the tool
  don't report breaking in some specific scenarios.  Added a few
  new files and to remove .NET Framework registry keys
  steps of cleaning 3.0 and 3.5.

  March 17, 2010 - force the process exit code to get spread
  for the self-extracting installation package.

  April 29, 2010 - added support to clean the .NET Framework 4.

  November 16, 2010 - added logic to clean the cache of .NET Framework 4 police service
  record.

  December 31, 2010 - add a logic of protection against infinite loops when the withdrawal of
  registry keys.

  January 17, 2011 - fixed a bug that prevented the .NET Framework 4 available
  as an option of cleaning on Windows Server 2003 (x 86).

  August 16, 2011 - fixed a bug that prevented mscoree.dll come off, on some
  x 64 versions of Windows.

  19 October 2011 - add a command line switch to allow users to force cleanup
  a version of the .NET Framework even if BONE conditions normally
  could stop him.  It is a switch intentionally undocumented
  and should be used only in rare cases where the user includes
  the impact.

  Thank you once again for a happy Vista user!

• Questions about the parameters of database using a fast recovery area and the writing of two copies of archived redo logs.

  My databases are 11.2.0.3.7 Enterprise Edition. My OS is AIX 7.1.

  I am to convert databases to use individual zones of rapid recovery and have two questions about what values to assign to database settings related to archived redo logs. This example refers to a database.

  I read that if I specify

  Log_archive_dest_1 =' LOCATION = USE_DB_RECOVERY_FILE_DEST'

  the names of newspapers archived redo written in the default quick recovery area is '% t_%S_%r.dbf '.

  In the past my archived redo logs have been appointed based on the parameter

  log_archive_format='GPAIDT_archive_log_%t_%s_%r.arc'

  I think log_archive_format will be ignored for logs archived redo written in the fast recovery area.

  I am planning to write a second copy of the archived redo logs based on the parameter

  ALTER system set log_archive_dest_2 = ' LOCATION = / t07/admin/GPAIDT/arch.

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  Before my use of a fast recovery area, I used the OEM 12 c Console to specify settings of backup of database that has been deleted and archived redo logs after 1 backup. Oracle manuals say rather specify a deletion of "none" policy and allow Oracle delete newspapers in the area of fast recovery if necessary. Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  Thank you

  Bill

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  They will be "GPAIDT_archive_log_%t_%s_%r.arc". LOG_ARCHIVE_FORMAT is only ignored for directories under OMF.

  Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  You can hold the deletion policy as it is. Oracle documentation, defining the STRATEGY of the ARCHIVELOG DELETION: "the deletion of archived newspaper policy applies to logs archive destinations, including the area of fast recovery."

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Telephone call about the event log errors - they claim to be the Technical Support

  Original title: event error logs

  I get a phone call from a person claiming to be a b/c my computer Tech support has published many errors in the event log.  Is - is this legitimate?  He wants me to do stuff in the event log.

  Hello

  Yes, it's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• missing events in the event log

  I'm really new and can't help otherwise explain what just happened to me. I am running Vista home and checked my reliability and performance monitor. He came back to me with missing events to the event log. 14% of my missing log files. He told me that my buffer size and maximum ETW memory buffer is not obtimal that the data sets are collected. I have AVG free virus and found no problem. I had a lot of problems with the security of the networks and curious to know for myself if someone takes information just behind my computer. Everyone acts as if I am perinoid, but I had log events while at work and shut down the system. Some are could not log on to attemtps still more successful. Many programs also show other computers on my network even glancing only ethernet to my dsl modem. So I'm not under xp but have the same diagnostic report. I would be grateful no sign, that I am not paranoid. thanx

  Hi Dancin' madman,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Vista are you using?

  (b) is connected to a domain, or more than 10 computers in your computer network?

  (c) what the event log you are trying to check?

  For example, if you check the log of events for an Application, then you must

  1. click on Start, type Event Viewer in the start search and press enter

  2. in the Windows logs , select the Application, it should be under the winlogon (the last)entry. Right click on the Application and select Properties.

  3. in the Properties , you can check for the latest event logs and check the settings if it is set to replace the events, if you want, then you can change the settings.

  Because you are worried about the security of the network, you can try first run a scan of online security.

  Follow the below links for analysis online on your computer to verify if there is a malicious software on your computer.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security/malwareremove/default.aspx

  You can also check if the Services of Windows Event log and dependence are started.

  1. Click Start, type Services in start search box and press ENTER.

  2. Locate the Windows event log in the mentioned Services.

  3. check if the status is started. If the condition column is blank, right click on the Windows event log Service and select start.

  4. open the Windows Service event log, select dependencies. In dependencies, select the Windows event collector and click ok to start the service.

  5. also check the dependencies in the Windows event collector and launch service dependencies by clicking OK.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Event log issues...

  So im going through my event log to try to understand a blue screen I got recently, and I had a few questions about things I stumbled on in the case log...

  The first is what is IPSec and the IKE and AuthIP entered services modules strategy service agent?

  and on the other hand...

  "Security," it lists these "Audit success".

  In detail, it lists the user as "N/A"? Should I be worried?

  Hello

  Strategy IPSec IKE and AuthIP are all connected and used for internet security and computer security peer and authentication.
  The IKEEXT service hosts the Internet Key Exchange (IKE) and Authenticated Internet Protocol () AuthIP modules overlay. These input modules are used for authentication and key exchange in Internet Protocol security (IPsec). Stopping or disabling the IKEEXT service will disable IKE and AuthIP key with peer computers Exchange. IPsec is typically configured to use IKE and AuthIP; Therefore, stopping or disabling the IKEEXT service might cause IPsec to fail and compromise the security of the system. It is strongly recommended that you have the IKEEXT service operation.
  Internet Protocol security (IPsec) supports to the peer network level authentication, data origin authentication, data integrity, confidentiality (encryption) data and anti-replay protection.  This service apply IPsec policies created through the IP Security Policies snap-in or the command line tool "netsh ipsec '.  If you stop this service, you may experience network connectivity issues if your policy requires that connections use IPsec.  In addition, remote management of the firewall Windows is not available when the service is stopped.
  These two paragraphs were taken from descriptions of services of each of them.
  The system of audits to ensure that they work very well.
  You have run scans with your anti-virus or MSE?
  I hope this helps.
  Jim

• Background process untraceable on the event log service

  Hello

  I use a Windows 7 Enterprise system,

  ASUS X 99

  I7-5960 X

  GTX Titan

  This is a whole new system.

  Recently, the spinning wheel "working in the shadows" near the cursor doesn't disappear. I mean he will start a few seconds after the start and just stay there. It drove me crazy so I had to understand. I spent hours on the internet has tried many things. I have a little shrunken down, but still no solution. Here are some of the things I've done:

  (1) I went to Task Manager. I noticed that there is a constant use of the CPU by about 7% at all times. It is abnormal because idling all my other computers are still 0-1%. I went to the tab process to see what that was doing this. This is when things started to get interesting. There was no process using so much CPU. The system idle process will be 98-99%, but the CPU usage would be even at 7-8%.

  (2) I read on the internet a program called Explorer of progress, so I downloaded to see if it could track down. It's even more bizarre. The process exploring the use of the processor has 1-2%, as it should; While the Task Manager, it was still 7-8%!

  (3) many people suggested that this kind of thing can be linked to an infection by the virus. So I ran scans with Norton trial we had (also in safe mode), nothing. Then, I uninstalled, installed Malwarebytes, scanned and found nothing.

  (4) I checked the driver updates. I also completely uninstalled and reinstalled the graphics and USB drivers. No luck.

  (5) then, I did a clean boot (most of the services have been disabled) and voila! It was fine. So, he had to be linked to one of background services.

  (6) after a long trial and error, I reduced to a single service: Windows event log. The problem would not happen if I disabled this service of msconfig, then rebooted. However, I googled this service and it turns out that it's something quite essential for the operating system and I should not turn it off.

  So now, I hit a wall. I have absolutely no idea what to do (I'm considering an update of the BIOS but doubt strongly it would be useful). Before ask you, I don't know what preceded the problem. Many people use this computer and I don't know who started it. A clean installation of Windows is an option, but it would be a large number of deactivation/activation of the software is the last resort.

  I would appreciate help.

  Thank you.

  NO.

  You/we can be able to obtain more information by running a trace of performance windows recorder.  Instructions in the wiki below

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• WMI is unable to provide the event logs remotely

  I'm watching windows remotely through WMI event.

  When we connect to the remote PC wbemtest we get output gaps:
   
  Select * from Win32_NTLogEvent where Logfile = "Our Custom Event Log"

  0 items

  But when we run wbemtest locally on the remote server, we can get all the events:
   
  Select * from Win32_NTLogEvent where Logfile = "Our Custom Event Log"
  191 items
   
  I checked all DCOM, RPC, WMI settings for the account, I'm trying.  Also, there is no firewall rule blocking the details I can see other measures just events.  Here are the steps that I took for the permissions:
   
  Start-> run-> DCOMCNFG
  My computer-> DCOM Config-> Windows Management and instrumentation-> properties-> Security-> all!
  Right click my computer-> properties-> COM Secutiry-> all!
   
  I rebooted the remote server and rebuilt WMI several times:
   
  wmiadap/f
   
  I followed these instructions and scowered the internet before coming here as a last resort.  Help, please!
   
  http://www.Paessler.com/knowledgebase/en/topic/3713-i-have-tried-a-lot-of-things-to-fix-my-WMI-what-else-can-i-try-to-avoid-reinstalling-Windows
  http://msdn.Microsoft.com/en-us/library/aa394603 (vs.85) .aspx
  http://www.opcactivex.com/support/tutorials/DCOM_Tutorial_-_Configuring_th/DCOM_XP/dcom_xp.html
  
   
  Also we recommend to connect the compliant Mircosoft. We will also write a forum for Microsoft about this problem and will keep you on this.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope this information is useful.

• PowerEdge R610 - Event log: unexpected error sense

  Hello

  One of my clients PowerEdge servers had an unexpected shutdown over the weekend. It came immediately after a few minutes, VMs were all running, etc. I checked the logs and noticed that it was an error that read:

  Event log: feel unexpected: Encl. PD 20 path 5842b0b045d63200, PEH: 12 00 00 00 04 00, meaning: 24/05/00: 0 controller (PERC 6 / i integrated)

  Is - this error is something worrying? Just want to make sure that the server is not dying or something.

  Thank you!

  It's usually nothing that should be worried. 'PD 20' is usually the bottom of basket.  If you are still concerned with it, I would recommend that you check your basket and PERC firmware/driver is up to date.

  I also suggest the OpenManage double-check to ensure that you are not read any questions about records and double check your battery status.

• Tecra S10 - event log shows several errors

  My Tecra S10-167 has a problem since a few weeks now. In the event log, I have several errors, but especially this one:

  Provider of
  [Name] atapi
  -EventID 11
  [Qualification] 49156
  Level 2
  Task 0
  Keywords 0 x 80000000000000

  -TimeCreated
  [SystemTime] 2011-02 - 14 T 18: 20:12.558505100Z
  EventRecordID 3020
  Channel system
  Security

  -EventData
  \Device\Ide\IdePort0
  00000000000000000000000000000000000000000000000000 000004100000 0000100001000000000000000B0004C002000000850100C000

  My laptop gives me fatal errors and it restarts itself.
  Can someone help me solve this problem? Please guide me through this because I don't know much about computers.

  I have already reinstalled windows 7 with no result.

  Thank you...

  Hello

  New OS installation didn't help?

  Well, maybe something wrong with the RAM?
  Run tests of RAM using the memtest86 +.
  Maybe this tool allows to detect certain errors

  But unfortunately, the message displayed in your ad says nothing to me :(

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!