Windows backup help

Similar Questions

• Windows Backup - will expire when you create a shadow copy

  I had the same problem for a few months, and now it's time to remedy. When you perform the backup of windows, I found the same message every time.

  Create the backup ends at 15% of the shadow copy creation then he said, Windows backup has not completed, the only information I get is it is a "Timed" Out while creating a cliché

  Can anyone help with this please?

  See this Microsoft Knowledge base article:
  + Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and at the time when there are high levels of input / output +.
  http://support.Microsoft.com/kb/826936

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Satellite L500 - error in Windows backup

  Having a Satellite L500 Windows 7 32 bit. Windows backup on the external drive is not (LONGER) work. Message: Last backup failed. Error message 0 x 8007002.

  Can set the restore/recovery point and can back up restore/recovery points, but cannot save actively / data backup on the external units with Windows tools. Council of Toshiba to 'secure your laptop' does not work as well. If possible, do not restore the entire operating system.

  Thanks for your help.

  Hey,.

  To be honest, I doubt that this question has something to do with Toshiba

  Did you already check Google for links?
  http://igtfy.com/?q=Windows+backup+error+0x8007002

  I found an answer that cleaning the registry with CCleaner (or another program) worked him would be worth to try ;)

• Windows backup for maintenance, will not perform a full backup.

  Original title: BACKUP WINDOWS FOR MAINTENANCE

  Why don't my backup to a blank disc or an external hard drive?

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         Windows backup that you are using?

  ·         Are you able to perform a backup to internal hard drive?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

   

  Method 1:

  You can try to clean boot in order to check whether a third-party software is causing a problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I also suggest to follow the troubleshooting steps form the article and check if that helps.

   

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

• Windows backup problem

  Backup has encountered a problem during the trip 3.2010 C:\Users\Phil\Desktop\Bham file backup. Error: (the system cannot find the specified file. (0 x 80070002))

  This is the error message I get when trying to back up my computer. I tried to find the file named so that I can delete the file - but I can't. Windows backup will not let me return everything to the top - he sends me right back to back the computer etc... I need help to know how to back up my computer dealing with this error message. Thank you.

  Phil Henry

  Hi Philippe,.

  For problems related to the backup, I recommend you try the following forum that specializes in backup: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/.

  Good luck!

• Legit or a scam? -unsolicited from Windows Live Help calls

  Help please! My just called and said she received a call from a compnay called Windows Live Help (I know what it is, I don't think they have made appeals to the people). Anyway, they said their servers showed that his IP address of the computer was hacked and she needed them allow control of his computer. She calls a # a long time away, talked to a foreign person went somewhere in the start menu (it does not remember) and handed control of his computer for them. They were going to say that its shield of defense windows license has expired and that the ONLY way to restore his computer files / was to reactivate his license. $549 for the life, $159 for 1 year, they said that no tech IT doesn't center or a safety program could help restore and protect his computer. It totally sounds like a scam to me, but I want to make sure. I would also like to give my mother the correct steps to protect his computer in the future and remove all * these people may have installed or caused to his computer. Can someone please give me some advice?

  Hello

  Malware research does not solve the problem.

  You're not fighting a malware infection.

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  We have all the errors and warnings in our Event Viewer

  If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  See you soon.

• Windows IT Help desk

  At 3:56 pm is I got a call from a guy who claims to be an employee with Windows IT Help Desk; Adem Smith/ID # ADM209. The call came from the following number; 69-666-6961 adem Smith gave me another number to contact him. 646 243-2811 he was telling me that my computer license has expired and so that his group to renew the license, I pay $199.00, and my computer was in danger of being hacked. Sounds a bit scammy to me.

  Anyone out there know such a group of support per person?

  Your comments will be greatly appreciated,

  Tony Capobianco

  Hello

  It's a scam.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Report phone scams

  • Help Microsoft to stop cybercriminals in reporting of theinformation about your scam phone.

  • In the United States, use the form of complaint to FTC Assistant.

  • In Canada, the Canadian Centre for fight against fraud can support.

  • In the United Kingdom, you can report the fraud as well as the unsolicited calls.

  See you soon.

• Failure of Windows backup while trying to read from shadow copy on one of the volumes to back up

  Original title: how to fix the cliché has failed during the backup

  Using Vista Home Premium Svc Pk 2, I get the "cliché failed" and did not finish the backup.  How can I fix it?

  Hello
  1 did you change on your computer before this problem?
  Follow the suggestions and see if it helps.
  Method 1
  You can follow the steps in Windows upward and the startup type of the service Volume shadow on automatic
  (a) click Start .
  (b) in the search box type Services.msc
  (c) make a right click the service and go to Properties.
  (d) select Automatic from the Startup type of the menu drop down.
  (e) click apply and OK.
  (f) restart your computer.

  Note: Once you restart the Volume Shadow Copy service all restore points will be deleted.

  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  You can also run the disk check.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  Note: You may lose data while Windows tries to repair bad sectors on the hard drive.

  See also:
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Note: The article is also applicable to Vista.

• Why Windows backup will not work on a network share?

  I am running Vista Home Premium and have a drive WD MyBookWorld NAS on a MS LAN.  OneCare used to do all my backups, never had any problem, but OneCare is no more.  I also have a NAS Iomega 2 TB hard drive and the problem is exactly the same for that too - XP and 7 can save on it, Vista can not.

  Windows backup works very well for readers SIN of my XP and 7 machines, but both the Vista, those who refuse.  I can drag and drop files from Vista to NAS, it's just the backup center who is the problem.  When I select the NAS drive for the backup on, he asks a user name and password.  My login to the Vista machine id does not work, and the administrator to the NAS password does not work.  The procedure fails with the 0x800706C6 message.  He refuses also backup on XP or 7 machines (with different messages).  He would be the backup on my other machine to Vista, but I do not have spare storage!
  I have read articles countless and tried to turn on/off control of accounts and mapping changes the network drive, without success - the error message, but does not go far.
  There is an industry on the internet trying to sell people PCHA (what is described as a Microsoft product), but I can't find any help on the Microsoft web site.  It is very bad, when the fault is so common.
  Help, please.  What should I do?

  Hello

  Windows Home Premium backup can't backup on a network location.
  So you will need to use an application of part 3. Professional, comprehensive and Enterprise edition
  backup to a network share.

  You can share files and use the 3rd backup XP to do or use Acronis or other
  party utilities.

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find
  and to restore a file as well as many.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  I hope this helps.

• Windows backup without required floppy drive

  Backup using Windows how do you make a full backup of the system without using a floppy drive required?   Windows backup requires that you have a floppy drive, but my system does not. All the answer given so far are not usable.

  Hi black jackets,
   
  For your information, you can backup and restore without the drive on your computer.
   
  I suggest you follow these below provided help articles.
   
  Backup and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files
   
  Methods to backup your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files
   
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows backup was interrupted by a Windows Update.

  Windows backup was interrupted by a Windows Update. The computer turns off and restarted, the backup was reported as being down.  It's on the DVD #42 (I am a photographer with a lot of GBs, it was the first time run the automatic weekly backup, so it's back up everything).

  I started another backup and was instructed to label the backup as #1 drive. My two questions are: is there a way to tell how many records I need until I run a backup. and 2. Is this pick up where the backup failed had stopped or I'm going to need an another 42 DVD?

  Thanks for your help! Lisa

  Vista does not tell you how many records will be necessary - this is not one of its features (but it is a good idea).  You just have to check what you have selected in the backup, total, divided by the size of each disk can hold and come with your best estimate.

  In my opinion, he will leave from the beginning - no choice upward where it was stopped (I don't think it's possible with any version of Vista or any type of backup you choose).  Vista keeps not an account of what is and has not been supported that can be used to pick up where it left off (well, he has a record, but it is not accessible for this purpose) - this is especially true if you already have another backup (although I don't think it would have been possible to resume where you left in any case).  You may need more than another 42 records because he had not done and we don't know how it will be eventually required - we can say that you will need at LEAST an another 42.

  If you use that many discs, may I suggest you get a USB external hard drive and use that instead for your backups - it will be much easier and you won't have to change disks.  They are not that expensive these days-make sure it's big enough to save what you want to back up and give you plenty of extra space because you'll use it quickly upward.

  Sorry if this isn't what you wanted to hear, but the Vista backup program is not the best available and has a lot of limitations and problems (but it's free and it works essentially for to use us it).

  BTW, next time, turn off the automatic updates AND disable your security software before making the next backup.  Turn them back on when the backup is complete.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to make a backup of the Windows BACKUP DELL?

  I have a Dell 0ptiplex 3010 with windows 7 pro 32 bit 10 units.
  How to make a backup of the Windows BACKUP DELL?
  Please help, I'm still confused with BACKUP DELL.

  Hi rahar_satriyo,

  Only the version complete Dell backup and restore will give you an option to backup computer image which is a paid version. The default Basic that comes with the system version will have only the restore factory in image.

• Windows backup error; A snapshot could not be created.

  Original title: Windows 7 - windows backup - snapshot could not be created

  When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

  I use:

  Windows 7 Home Premium SP1

  processor Intel I5 2310

  8 GB RAM

  1.5 TB of hard drive

  The full message is:

  "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

  Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

  Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

  I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

  System Writer - State [5] waiting for completion

  MSSearch writer - State [5] waiting for completion

  WMI Writer - State [9] failed

  What can I do to get the backup to work?

  Hi Tom,

  I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• Windows backup: if I delete a file on my computer, it deletes the file on my backup too?

  I recently discovered that the feature of automatic backup of windows on my computer and I'm thrilled about it (I think...). So far, my method of backup was just copy and paste all my files on an external hard drive. This method works very well, but it of a lot of time because I have to open each file and include the files or documents are new since my last backup and then drag them over my external hard drive. Very labor intensive.

  Thus, windows backup will do that for me automatically? It will recognize the new files and save them to each backup of the future that I create? And what would you say if the already-saved files are renamed or reorganized on my computer? The backup file will recognize these changes? Or he will treat them as if they are new files (and then let me with duplicates on the backup file)?

  Also, after I backed up my files on my external hard drive, I want to be able to remove some of these files on my computer (in order to free up space on my computer). But these files will then always be on my backup file?   In other words, let's say I finished my initial backup and then delete some files on my computer... on my next backup, windows will see that I have deleted some files from my computer and think I also want these deleted my backup files? Or he'll just leave these files on the backup?

  Hello

  Yes, the Windows 7 backup allows you to create the backup schedule. If you have deleted files after the backup is created, the files must be available in the Windows 7 backup. In your new scheduled backup files are added incremental basis if they available even if you delete them from your computer. All you have to do is to restore them. You can restore individual files or folder tree.

  Some useful tips on Windows backup:

  • Make sure that you create the full backup or an Image of the computer before trying to scheduled backup
  • Create a daily backup schedule, using the Panel\Backup command and restoration centre
  • Verify that your scheduled backups are created every now and then
  • Run a test backup first, just to become familiar with the Windows backup
  • Try to use an external HARD drive that is bootable for backup and create a system restore disk. Just in case you need to restore your Windows 7 full

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer