Questions about Windows media player can play DVDs.

Similar Questions

• My recently downloaded Windows Media Player 11 play dvd, audio cd and cd rom, but will not recognize two photos of the dvd which have been able to acknowledge by Media Player 10 and record of the Explorer Windows-with some difficulty

  1. Windows Media Player 10 has opened a photo successfully dvd but a message "Microsoft has encountered a problem and needs to close" came on the screen several times.  Had to re insert the dvd picture, but it would open again each time.
  2. Tried the cd drivers and troubleshooting dvd and was informed of my dvd could not be played because there was no decoder for dvd.  Following instructions and chose a windows xp approved decoder pack download - dvd has chosen the Roxio CinePlayer DVD Decoder Pack.
  3. Then upgraded the media player to Windows Media Player 11.
  4. After that, dvd and cd rom could be opened by the media player 11, but neither the DVD or cd ROM readers would recognize the photo DVD in question had been inserted into one of these discs, and even less to be opened by the media player.
  5. Program scanner and photo used to transfer my photos printed digitally on a dvd are trademarks of Hewlett-Packard.  Contact the center of the photo, but they could not provide me with any guidance or even particular HP photo program they used to create the dvd picture.  I remember the photos were stored on the dvd in JPEG format picture and was able to open by Windows Explorer before I've updated since WMP 10-11.

  "" I remember well, the pictures are stored on the dvd in JPEG format picture and was able to open by Windows Explorer before I've updated since WMP 10-11 ""

  Looks like you have a data dvd, which has just the pictures on it and it will not be seen by WMP, who needs a dvd-video disc.

  It should always open in windows Explorer and you should be able to see your pictues it.

• Windows media player cannot play DVD

  How can I download a driver for windows media player, I use vista basic

  Hi silverbird,.

  1. What is the file format of DVDs?

  2 what is the issue pertaining to all DVDs or DVDs?

  3 has Windows Media Player able to read and play these DVDs more early?

  4 are the DVD is detected on my windows computer?

  5. do you get any specific and a code error message when you try to read the contents of the DVD?

  In the meantime, follow these steps.

  Step 1:

  If the DVD are not detected in Windows of the computer, you can click "Run now" using the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Step 2:

  You probably need codecs supported for read the DVD. You can do this by downloading and installing codes from third party which supports the DVD format.

  Reference:

  With the help of codecs
  http://www.Microsoft.com/windows/windowsmedia/player/FAQ/codec.mspx

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Media Player not playing DVD

  I have a HP TouchSmart 310PC.

  When Iopened Windows Media Center he would not play the dvd. I couldn't get audio but no picture.

  I tried Troubleshootingafter, ensuring that I changed a setting in dvd with Windows Media Player.

  What could be a solution?

  Thank you.

  Thanks for the reply but in fact, what worked was going to the Control Panel, clicking AutoPlay and after selecting recording DVD playing by Windows Media Player.

• Windows media player-Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings.

  I bougth Windows 7 starter, after the installation, I am unable to read the CD/DVD with media player. These messages continue to flow whenever I have CD/DVD slot...

  "Windows Media Player cannot play DVD video. You may need to adjust your Windows display settings. Open display in Control Panel settings, then trylower your screen resolution and color quality settings"I've adjusted manually, no solution, I had use microsolt auto FIX no way." Please help.

  Windows 7 Starter Edition or Basic... does not include a DVD decoder.

  As you can see in the following article... MS recommends
  upgrade to Windows 7 Home Premium, Ultimate or business.
  More features for you... more money for them...

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  It is possible that one of the following freeware
  media players would play your DVD:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  GOM Media Player
  http://download.CNET.com/GOM-media-player/3000-13632_4-10551786.HTML?tag=mncol;2

  Good luck...

• Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

  This is the message that I faced when I tried ti a watch a DVD I've seen countless times in y HP laptop.  I read some answers here, but I do not understand something they are trying to say.  I'm not technologically minded so pleaaaase can someone tell me what is happening?

  Hi Abigayi lMcFadyen,

  To prevent the illegal creation of digital copies of DVD, information on most of the DVDs are blurred. Your DVD decoder and Windows Media Player have software to copy protection that decodes the information on the DVD just before posting. If this software does not start successfully, you may receive this error.

  Method 1: You will have to perhaps download and install the latest plug-in to do this, see the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Method 2: You can see the steps in the link below by Shinmila H

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-cantwont-play-DVD-BC-digital/feefa02d-f6c0-42cd-8156-9046e4f83783

• How can I solve this problem on Media Player? Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (948247) how to set a system restore
  point in Windows XP
  http://support.Microsoft.com/kb/948247

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following
  freeware multimedia players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of
  the following Codec Packs.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Win XP / Vista / Win 7-32 bit and 64 bit)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (Windows 7, Vista and XP SP1 and above - 32-bit and 64-bit)

  Good luck...

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  ====================================
  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot read DVDs, error: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  DVD playback problem started today.  SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot.  I have not had this problem before.

  Hi RosemaryHanna,

  Thanks for posting in the Microsoft community!

  I understand that you are unable to read the DVD. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) the video works fine when playing any video recorded or audio files on the computer?

  Method 1: Solve the video issues in Windows Media Player and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Hello

  1. Have you made changes on the computer before this problem?
  2. You get the error message?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Install the latest version of codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  DVD decoder not installed?

  I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
  A few weeks ago, I played DVD on my computer. I would like to know what is happening. Any ideas/suggestions?

  I tried to play one of the same DVDs I played before... same message.  Nothing to my knowledge has been removed from my computer and I'm the only one with access... "very confused.

  Thanks if anyone can help.

  Yes, and if you install the utility on your system, you'll see all decoders.

  The utility will also tell you if a decoder is compatible or not.

  Using Media Player version 10 or 11?

  the utility tells me I have no decoder... the only thing I can think is that if I actually deleted it... I rarely remove anything because I do not add a lot... but it is possible a few weeks ago, I have to get rid of some things (I'm quite cautious because I'm not an expert).   It is the Media Player version 11, I was trying to use... but I rebooted now 10 to see if there was something to update related that mess.

  because I used the VLC Player successfully, I have not yet tried Windows Media Player (since WMP reloading and load the codec pack)

  So great to have the entry of a person who knows what he's doing.  Thanks again. I will try the Windows Media Player later and see if I have his use of return.

  Have a great day!

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.