Questions now connection for Wii (NETFLIX)

Similar Questions

• Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Have you tried to reboot your router, correct your location settings, you use audit stage 2.

• I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  When I had the same problem, I used the solutions here If you have forgotten the answers to the security of your questions - Apple Support Apple ID

• I did not use my PC for a while and have forgotten my user name and password. It is now necessary for me to install software on this PC, but need to log-in to do this

  Original title: Log-in question

  I did not use my PC for a while and have forgotten my user name and password.  It is now necessary for me to install software on this PC, but need to log-in to do this.  How can I better log-int?

  The software is now located on my desktop but cannot be put to use; apparently because it is not installed in a suitable place in my computer.  Using the Guest login does not work since the installation of this software is not allowed in the comments section.  Your ideas will be appreciated.

  Hello

  What account are you connected to? Administrator or guest account?

  See the following article: Microsoft's strategy concerning lost or forgotten passwords

• When CINEMA NOW available for Sony blue ray BDP-S3100/BX310? Says 'coming soon '.

  When CINEMA NOW available for Sony blue ray BDP-S3100/BX310?  Says 'coming soon '.  If this isn't the case, in the near future, is it possible to connect laptop through TV via USB cable to watch the movies of this application?

  Hi Rachelann,

  This is discussed by Sony. Sony and CinemaNow are researching on these issues, but there is no time limit as to when a resolution will be available.

  Yes, you can connect laptop to TV and can see movies to computer; However, the USB connection does not work.

  See the below knowledge article for information on the TV connection on computer for use as a monitor:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/42805/c/65%2C66/kW/42805

  If my post answered your question, please mark it as "acceptable Solution".

• Firefox guard connection for updating servers despite the changes to the settings to stop this behavior

  I created a user.js that integrates the https://support.mozilla.org/en-US/kb/how-stop-firefox-making-automatic-connections and other settings, but Firefox for Android is still trying to connect to multiple addresses that appear to be Mozilla updates related (63.245.217 * aus4.mozilla.org).

  Review of about: config confirms user.js was recognized.

  User.js: http://pastie.org/private/syyzqotsooclhwnuoxqo7w

  Firefox for Android version 41.0.

  Does anyone know of another tweak I should do which could solve this problem?
  If this is not resolved here, where should I try next?

  Note: I'm not suspecting anything harmful. The merits of this particular user.js are out of scope for this question. It is just a base where no connection is made without the consent of the user and not for regular use.

  This question has been posted to the following locations, with no solutions.
  https://support.Mozilla.org/en-us/questions/1088951
  http://forums.mozillazine.org/viewtopic.php?f=47 & t = 2968493
  http://Android.StackExchange.com/questions/126168/Firefox-for-Android-mysterious-connections-after-turning-everything-off-in-Setti
  https://www.reddit.com/r/Firefox/comments/3q77a5/where_can_i_get_a_reply_to_this_question_about/

  The solution is to assign to media.gmp - manager empty .url.

• "Unnamed device is now connected" when using wifi

  I plug all day at a friends via wifi and one place and another to another friends.  The first person that I get a msg several times when I am on... "a device without a name is now connected.  When I use the wifi at the other House of friends, I don't get this msg.  Is something worrying?

  Hello
   
  .  What is the version of your Windows operating system?

  Method 1:
   
  Windows 7 operating system:
  You can use the available network utilities and check. It can also help you to solve the problem:
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
   
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Windows Vista operating system:
  Network connection problems:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  For the Windows operating system:
  How to troubleshoot a network home in Windows XP:
  http://support.Microsoft.com/kb/308007
   
  Method 2:
  
  Windows 7 operating system:
  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hardware and drivers:
  http://Windows.Microsoft.com/en-us/Windows7/help/hardware-drivers
   
  How can I troubleshoot network card? :
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Windows Vista operating system:
  Problems of network card:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
   
  For the Windows operating system:
  How to manage devices in Windows XP:
  http://support.Microsoft.com/kb/283658
  
  Method 3:
  
  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  I hope this helps.

• Outlook express does not connect to the internet! I have a connection for Internet Explorer; does anyone know wtf I am doing wrong! ??

  Previously I could not any internet connection at all, so all excited and then back on again! To conclude that, although I now connect to Internet Explorer, for some strange reason, I can now retrieve emails!

  If anything, I'm wrong dong - can no idea what, someone point me in the right direction? No point in communicating with BT (ISP) like all they will say is that I have a connection, if you see what I mean.

  Any help, really really appreciated

  What happens if you try to send you a message? He sent? Error messages?

  If you have a router, unplug it for 10 seconds and plug it in again. Give it time to reset and then do the same for the modem. Finally, close all programs and restart.

  There is no doubt in my mind that BT will say everything's fine, but my money is on a temporary server glitch and nothing on your end.

• Alltel HAUWEI question internet connection

  I contacted Alltel, which is where I get my wireless internet service and spoke to the Advanced Technology Department.  And there is something missing in my Windows XP, what they say, so I can't launch the wireless internet.  He told me that it can not connect and I need to change my network settings.  We tried to reset the computer and couldn't because there is something missing.  The Technology Department at Alltel and I can not just what to do.

  Windows Xp

  On the left, click Start
  Make a right click my computer
  Left-click on properties
  Left click on the Hardware tab
  Click left button Device Manager
  Left click + network adapters
  Now looking for something like wifi / wireless / 802.11
  Something like that is a wireless card / nic / connection.
  Something with a blue yellow circle tringleSi = contact pc manufacturer
  Red Cross = disabled adapter.
  2.
  If you have this wireless card to the new IP etc settings, you need to auto
  On the left, click Start
  On the left, click on run
  type in the box ncpa.cpl and press enter
  typing this will bring up your network connectionsRight click on the Adatper Wireless
  Left-click on properties
  Scroll to the line Protocol Internet (tcp/ip) and right click on the line to highlight
  Then left on the properties button
  Check that the IP & dns is on auto
  NO2 will be available with a card... work wireless hope this makes sense

  Shazbot is the 1 TrophyManager

• Windows live has not next start co figuation is incorrect. application of ESA, connect for more details. How do I do that

  Windows live has not next start co figuation is incorrect. application of ESA, connect for more details. How do I do that

  Hello

  Welcome to Windows Live Solution Center
  http://windowslivehelp.com/

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Vista will not recognize the projector connected for multiple display

  I'm under a system dual boot with Windows XP and Vista.  When running under XP, I doesn't hurt to connect a projector to my laptop and extend the desktop on the projector for meetings and others.

  When I am running Vista, it does not even recognize that the projector is connected.  However, once I have connected the projector, if I reboot the system, it will then display on the projector.  If I disconnect the projector, the screen does not reappear on the screen of the laptop, I have to restart, with the projector removed for office reappear on the screen of the laptop.  I'm hoping to get multiple monitors to work with Vista, as it does in my XP boot.

  For the purpose of the next presentation running in XP is not an option.

  Hi cptrigeek

  Try these steps and check if that helps:

  Method 1: We can try to perform a power cycle of the projector.

  Remove the cable from the power of the projector and this continues for 5-10 minutes. Also do the same for the laptop, Dungeon, it off. Then put back in place and start the projector. Now, start the laptop as well. Connect now. Now, you will need to install the driver for it (if there is one). After which, you need to configure the settings of the laptop.

  Method 2: Check the following steps:

  1. connect the projector to your Windows PC. NOTE: the following steps apply if you use your PC in MIRROR mode only.

  2. on the screen of the computer, right CLICK on the desktop and select Properties.

  3. click on the SETTINGS tab. If you want that your displays in mirror (what you see on laptop, it's what the public sees) you must make sure that the box "extend my desktop to this monitor" is DISABLED. If you see a box of "mirroring", remember to check it out.

  4. drag the slider to 1024 x 768 screen. As a general rule, the external monitor may limit this parameter. If your screen is higher, it might not display on the projector, then you want to test this until you're ready to take the floor. Drag the color to highest (32 bit) if available or medium (16 bit) quality if the first is not available.

  5. now select FN and press the function key. This key is usually given by a small screen icon, the CRT/LCDtext and is usually found on F8 or F5 even. Press the appropriate operation button ONCE and wait. After a few seconds, the second screen should light up. Be patient, it may take up to 5 seconds. On the projector, it may take up to 10 seconds for the projector to detect your system and switch. Note: a second press of this function (in general) will switch to monitor EXTERNAL only. A third press stop INTERNAL onlyand the circle for each push after that. Also note that some laptops can do this sequence in a different order, so learn your system so that you can quickly to the desired mode.

  6. click on the ADVANCED button. If 'apply the new settings to display without restarting' is not selected, select it. Under screen refresh rate, select 60 Hz. click APPLY and CONFIRM the choice. Click OK to close the ADVANCED options dialog. Close the display properties dialog box. You should now see a mirroring of your monitor on the second monitor.

  7. test: A test, disconnect the second monitor. put your mobile PC to sleep. He wakes up and let it fully come (login if necessary), and then reconnect the external monitor. On some machines, he needs to quickly display the screen in the last known state (you may need to wait up to 10 seconds). If it is not correctly displayed, press the switch function, ONCE. Yet once, note that it can take up to 10 seconds to view, so be patient. If only the projector display now, some pressure on the function switch key should provide for both screens again. If you can't get the projector to display, check all your connections and settings above.

  8 Note that when you use the projector, after pressing the function for changing the monitor button, it may take up to 10 seconds for the monitor find and block on your machine. Just wait. Pressing on the keys new fkey can simply ruin your settings or turn off the projector.

  9. not all laptops work the same way. Please make sure you learn how your work before you get to your presentation.

  (Not mirrored)

  1. If you do NOT want mirrored poster (display of different internal and external), CHECK the box next to the line that reads "extend my Windows desktop to this monitor." This SHOULD result in the external monitor display an image which is an EXTENSION of the current desktop.

  2. in the settings dialog box, the internal monitor appears as a '1' and externally as a '2 '. Click ONCE on the '2 '.

  3. with '2' selected, drag the Screen Resolution slider to the left or to the right until the resolution reads "1024 x 768". Also affect the quality of the highest (32-bit color) if available or average (16 bit) if the first is not available.

  4. click on the ADVANCED button. If 'apply the new display settings without restarting' is not selected, select it.

  5. Select the MONITOR tab. Under screen refresh rate, select 60 Hz. click APPLY and CONFIRM the choice. Click OK to close the ADVANCED dialog box. Your system is now set for an extended desktop. When it is connected to the screen, you may need to use the function switch key to turn once more on this option, but on systems that I tested, the extended desktop comes just when the monitor is connected. Yet once, I suggested some tests with this mode of knowing how your laptop will perform when connected to an external monitor before coming to speak.

  6. notes that, in this mode, items moved to the extended desktop can be "lost" it if the external monitor is disconnected because they live on the extended desktop is no longer available. Also note that if the extended desktop is turned on, this part of funds 'second' can continue to live, which means that the cursor and the object can be moved off the screen in this sector and not be visible on a single internal monitor. To resolve this problem, do a right-click on the desktop, select Properties, select settings, click on the '2' box and UNCHECK the extend option. Items left on the extended desktop should now align the right edge of the internal display.

  See also: http://windowshelp.microsoft.com/Windows/en-US/Help/16152337-a45c-4a1a-b302-cfd95399ce071033.mspx#EQB

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Multiple monitor issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a laptop Windows 7, which says it's the upgrade. It puts in place upgrade now page for more than 5-6 hours.

  * Original title: upgrade Windows 10

  I have a laptop Windows 7, which says it's the upgrade.  I leave work on the upgrade to Windows 10 on 2 different days and no luck.  It puts in place upgrade now page for more than 5-6 hours.  Any help?

  Jeff

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Sqlplus very slow connection for a particular user

  Hi Experts,
  
  I am faced with a particular problem.
  
  DB version: 11.1.0.7 on Solaris 5.10
  
  Sqlplus connection to the database is going very slowly for a particular user (APPS) - it takes 30 seconds or more
  For all the other users on the database, it's normally.
  
  There is no trigger connection for all users...
  
  I see TNS-12535: TNS:operation errors in alertlog has expired.
  
  Any help in getting this issue is highly appreciated...
  
  Thank you...

  Hello

  Looking at your question, this is the only thing that comes to mind first - blog

  http://viveklsharma.WordPress.com/2012/01/27/sqlplus-connection-slow-library-cache-lock/

  HTH
  Anand

• WAA Connect for virtual individual-no class provided?

  I'm a bit confused between businesses and individuals.

  1. If I buy WAA Connect for the individual, then is it virtual class no. function? only scheduled meeting?

  2. If I want to buy WAA Connect for business, buy online by myself? or should I buy through resellers?

  Thank you very much!!!

  1. in technical terms, you're right. The individual option has no ability the training Module added, which includes a feature called a virtual classroom. However, there is nothing prevents you to use as a virtual classroom meeting room. There is that only one functional difference between a meeting room and a classroom, virtual, and now the VC has the ability to shoot a course of training in there. If you don't plan to take advantage of this feature, you will see no difference between the meeting and VC.

  2. If you want to buy for business, you need to buy from a dealer. Adobe does not directly sell it.

• Generic connectivity for 64-bit 10 g 2 on Windows

  I want to create a link of database from a Windows oracle database to SQL Server 2005. The obvious solution seemed to be generic connectivity using HSODBC.
  
  However, I have not HDODBC. EXE in my oracle 64-bit home.
  
  Doing some research, it seems that HSODBC has never been provided/made supported on 64-bit windows, and the solution is to use the 11g gateways installed in another House and use DGODBC. EXE.
  
  Is this correct?
  
  HSODBC was free with 10g. Is DGODBC still free, or should I license it as a product of the bridge?

  Hi Jim,.
  Yes, that's correct. You can use DG4ODBC 11.2, which is the product of the follow-up HSODBC and is now available for 64-bit Windows.
  As HSODBC product tracking DG4ODBC is still free.

  You can get the latest version of the portal software "My Oracle Support" - look for the 11.2.0.2 patch group: 10098816: 11.2.0.2.0 PATCH SET FOR ORACLE DATABASE SERVER and make sure that you have selected the Group of fixes 64-bit Windows
  The Oracle gateway software can be found in p10098816_112020_platform_5of7.zip.
  Download this CD and install the gateway software in its own Oracle_home.