Questions of NetBIOS
Hello
Thank you for the question to Microsoft Community. I'll give my best to help you.
Method 1: I suggest you try the following steps.
a. open network connections (start > run > ncpa.cpl > OK)
b. right-click on the icon for your connection to the Local network (assuming you are connected by Ethernet to a router)
c. under the general tab, under the heading "this connection uses the following items", select "Protocol Internet (TCP/IP)" and click on the button 'properties '.
d. on this second general tab, check the option on "Obtain an IP address automatically" button is selected and click on the button "Advanced" at the bottom
e. click on the tab "WINS."
f. Select the radio button "Enable NetBIOS over TCP/IP"
g. click OK
Method 2: If the above doesn't help after a reboot, reinstall the TCP/IP, the General principles only stack on:
Open a command prompt window (start > run > cmd > OK)
Type the following line in the black command prompt window and press enter
netsh int ip reset c:\resetlog.txt
Reset.
Method 3: If the steps above fail, I suggest you uninstall and reinstall the network adapter drivers.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Tags: Windows
Similar Questions
-
Change of name affects NetBios of Mac Time Capsule?
Hi all
I noticed that my netbios name is the one I always used with '-2' after him, I don't know why and can't remember if I chose that, but I basically changed it back to what it was without the extra part. However I've done backups to my Apple Time Capsule with the "nom_netbios-2". Now that I've renamed "nom_netbios", is that going to affect my Time Capsule? Sorry for the question but I'm quite new with Time Capsule. Thank you!
Check if you have backups for two Macs with similar names, rather than backups for a Mac as follows:
Open any window in the Finder on your Mac
Look for Time Capsule icon under the title shared on the left side of the window
Click the Time Capsule and a folder called 'Data' (unless you have changed the name of the Time Capsule disk) appears in the box on the right
Double click on data to open the player. You may be asked the peripheral or the administrator Time Capsule password if you have not done this before
Now look to see if there is a file "sparsebundle" for your Mac, or there are two
Ideally, you do not want to only see one file with the normal name of your Mac
Report on the results
-
Network - NetBIOS and working group
Hello.
Sorry if it's a little silly question, but I'm not very good with computers and just had a question about something. I get the fact that the NetBIOS name is generated on random based on the name of my laptop, but the fact in the "WORKING group" which means I'm connect to something or offers other computers to share files and so on, on with myself?
It is only used if you file sharing with Windows machines.
OS X Yosemite: set up a Mac to share files with Windows users
-
IIS 7.5, the NETBIOS command limit has been reached
We use IIS services and media to stream videos. It comes to our dedicated streaming server. On rush hour, an error showed by saying 'the NETBIOS command limit has been reached.
- IIS version is 7.5
- OS version is Windows Server 2008
Any info on this would be helpful extreme.
Thank you
Hi, Pranab,
Error message "the NETBIOS command limit has been reached" in Windows Server 2003, Windows XP, and in Windows 2000 Server
http://support.Microsoft.com/kb/810886
NETBIOS command limit has been reached
If you need more information, repost your question to the TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
NetBIOS send request for gateway updates
Hello
I have windows xp by sending a useless request to the gateway of netbios-ssn. Please find the logs of the system from the bridge...
Please guide what should I get to stop at the same
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3444 DF PROTO = TCP SPT = 139 DPT = 3160 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3445 DF PROTO = TCP SPT = 139 DPT = 3161 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3446 DF PROTO = TCP SPT = 139 DPT = 3173 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3447 DF PROTO = TCP SPT = 139 DPT = 3174 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3448 DF PROTO = TCP SPT = 139 DPT = 3193 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3449 DF PROTO = TCP SPT = 139 DPT = 3194 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3450 DF PROTO = TCP SPT = 139 DPT = 3213 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3451 DF PROTO = TCP SPT = 139 DPT = 3214 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3452 DF PROTO = TCP SPT = 139 DPT = 3217 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3453 DF PROTO = TCP SPT = 139 DPT = 3218 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3454 DF PROTO = TCP SPT = 139 DPT = 3165 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3455 DF PROTO = TCP SPT = 139 DPT = 3166 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3456 DF PROTO = TCP SPT = 139 DPT = 3169 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3457 DF PROTO = TCP SPT = 139 DPT = 3170 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3458 DF PROTO = TCP SPT = 139 DPT = 3197 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.17.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3459 DF PROTO = TCP SPT = 139 DPT = 3198 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0
June 24 at 11:57:34 ebizchem kernel: fp = bad_packets:1 = DROP IN = OUT eth0 = eth1 SRC = DST = 192.168.86.1, LEN = 48 TOS = 0 x 00 192.168.1.54 PREC = 0x00 TTL = 127 ID = 3460 DF PROTO = TCP SPT = 139 DPT = 3209 WINDOW = 8192 RES = 0 x 00 ACK SYN URGP = 0Hi Andrew,The question you posted would be better suited in the TechNet Forums. I suggest you send the request in the given link.
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=itproxpspHope this information helps. -
I am ASA 5505 that I am of is running correctly by using the AnyConnect client. The question is, can I connect to the fine external interface, but cannot ping or attach them to any host on the inside. When I connect, it accepts the user name and password, and I can run the ASDM or SSH to the firewall very well, but not further. In the control, after I log in, I get an IP address inside, of the order of 10.7.30.x as expected.
Following configuration:
: Saved
:
ASA Version 8.2 (5)
!
asa5505 hostname
domain BLA
activate the password * encrypted
passwd * encrypted
no names!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 150
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.7.30.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP EXTERNAL IP 255.255.255.128
!
interface Vlan150
nameif WLAN_GUESTS
security-level 50
IP 10.7.150.1 255.255.255.0
!
boot system Disk0: / asa825 - k8.bin
config to boot Disk0: / running-config
passive FTP mode
clock timezone STD - 7
DNS server-group DefaultDNS
domain BLA
permit same-security-traffic intra-interface
object-group service tcp Webaccess
port-object eq www
EQ object of the https port
object-group network McAfee
network-object 208.65.144.0 255.255.248.0
network-object 208.81.64.0 255.255.248.0
access extensive list ip 10.7.30.0 outside_1_cryptomap allow 255.255.255.0 192.168.24.0 255.255.252.0
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 192.168.24.0 255.255.252.0
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 172.16.10.0 255.255.255.0
outside_access_in list extended access permit tcp any host 159.87.30.252 eq smtp
outside_access_in list extended access permit tcp any host 159.87.30.136 Webaccess object-group
outside_access_in list extended access permit tcp any host 159.87.30.243 Webaccess object-group
access-list extended outside_access_in permit tcp host 159.87.70.66 host 159.87.30.251 eq lpd
outside_access_in list extended access permit tcp any host 159.87.30.252 Webaccess object-group
outside_access_in list extended access permit tcp any host 159.87.30.245 Webaccess object-group
outside_access_in list extended access permitted tcp object-group McAfee any eq smtp
permit access list extended ip 172.16.10.0 outside_access_in 255.255.255.0 10.7.30.0 255.255.255.0
outside_access_in list extended access permit ip host 159.87.64.30 all
standard access list vpn_users_splitTunnelAcl allow 10.7.30.0 255.255.255.0
IPS_TRAFFIC of access allowed any ip an extended list
access extensive list ip 10.7.30.0 outside_nat0_outbound allow 255.255.255.0 any
inside_access_in list extended access permit udp 10.7.30.0 255.255.255.0 any eq snmp
access extensive list ip 10.7.30.0 outside_cryptomap allow 255.255.255.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
host of logging inside the 10.7.30.37
Debugging trace record
Within 1500 MTU
Outside 1500 MTU
MTU 1500 WLAN_GUESTS
local pool VPN_POOL 10.7.30.190 - 10.7.30.200 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside_nat0_outbound
NAT (WLAN_GUESTS) 1 0.0.0.0 0.0.0.0
public static 159.87.30.251 (Interior, exterior) 10.7.30.50 netmask 255.255.255.255
public static 159.87.30.245 (Interior, exterior) 10.7.30.53 netmask 255.255.255.255
public static 159.87.30.252 (Interior, exterior) 10.7.30.30 netmask 255.255.255.255
public static 159.87.30.243 (Interior, exterior) 10.7.30.19 netmask 255.255.255.255
public static 159.87.30.136 (Interior, exterior) 10.7.30.43 netmask 255.255.255.255
Access-group inside_access_in in interface inside the control plan
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 159.87.30.254 1
Route inside 172.16.1.0 255.255.255.0 10.7.30.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server ADWM-FPS-02 nt Protocol
AAA-server ADWM-FPS-02 (inside) host 10.7.30.32
Timeout 5
auth-domain NT ADWM-FPS-02 controller
AAA-server ADWM-FPS-02 (inside) host 10.7.30.49
auth-DC NT ADWM-DC02
AAA authentication http LOCAL console
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 206.169.55.66 255.255.255.255 outside
http 206.169.50.171 255.255.255.255 outside
http 10.7.30.0 255.255.255.0 inside
http 206.169.51.32 255.255.255.240 outside
http 159.87.35.84 255.255.255.255 outside
SNMP-server host within the 10.7.30.37 community * version 2 c
location of the SNMP server *.
contact SNMP Server
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 206.169.55.66
map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
card crypto outside_map 2 match address outside_cryptomap
peer set card crypto outside_map 2 159.87.64.30
card crypto outside_map 2 game of transformation-ESP-AES-192-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ca trustpoint *.
Terminal registration
full domain name *.
name of the object *.
MYKEY keypairs
Configure CRL
Crypto ca trustpoint A1
Terminal registration
fqdn ***************
name of the object *.
MYKEY keypairs
Configure CRL
Crypto ca trustpoint INTERMEDIARY
Terminal registration
no client-type
Configure CRL
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
Configure CRL
ca encryption certificate chain *.
certificate ca 0301
BUNCH OF STUFF
quit smoking
A1 crypto ca certificate chain
OTHER LOTS of certificate
quit smoking
encryption ca INTERMEDIATE certificate chain
YET ANOTHER certificate
quit smoking
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca LAST BOUQUET
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 10.7.30.0 255.255.255.0 inside
Telnet timeout 30
SSH 206.169.55.66 255.255.255.255 outsideSSH timeout 5
Console timeout 0
management-access inside
dhcpd 4.2.2.2 dns 8.8.8.8
!
dhcpd address 10.7.150.10 - 10.7.150.30 WLAN_GUESTS
enable WLAN_GUESTS dhcpd
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5 of sha1
SSL-trust A1 out point
WebVPN
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-dart-win-2.5.2019-k9.pkg 1 image
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal VPNUsers group strategy
Group Policy VPNUsers attributes
value of server DNS 10.7.30.20
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_users_splitTunnelAcl
dwm2000.WM.State.AZ.us value by default-field
Split-dns value dwm2000.wm.state.az.us
username HCadmin password * encrypted privilege 15
attributes global-tunnel-group DefaultWEBVPNGroup
address VPN_POOL pool
authentication-server-group ADWM-FPS-02
strategy - by default-VPNUsers group
tunnel-group 206.169.55.66 type ipsec-l2l
IPSec-attributes tunnel-group 206.169.55.66
pre-shared key *.
tunnel-group 159.87.64.30 type ipsec-l2l
IPSec-attributes tunnel-group 159.87.64.30
pre-shared key *.
!
class-map IPS_TRAFFIC
corresponds to the IPS_TRAFFIC access list
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
Review the ip options
class IPS_TRAFFIC
IPS inline help
!
global service-policy global_policy
field of context fast hostname
anonymous reporting remote call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e70de424cf976e0a62b5668dc2284587
: end
ASDM image disk0: / asdm-645 - 206.bin
ASDM location 159.87.70.66 255.255.255.255 inside
ASDM location 208.65.144.0 255.255.248.0 inside
ASDM location 208.81.64.0 255.255.248.0 inside
ASDM location 172.16.10.0 255.255.255.0 inside
ASDM location 159.87.64.30 255.255.255.255 inside
don't allow no asdm historyAnyone have any ideas?
Hello
Please, add this line in your configuration and let me know if it works:
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 10.7.30.0 255.255.255.0
I ask you to add that it is because you have not specified any exceptions for the return shipping. Once you add to it, will allow you to go through the tunnel VPN, packets back. When this command is not there, you will be able to access everything on the SAA but nothing behind it.
Let me know if it helps.
Thank you
Vishnu
-
Hi all
I have configured the site to site vpn b\w ASA 5510 ASA 5505.Its works fine, I can able to ping on the host of both sides.
But I have the following problem
1.I can access the shared folder of the peer host using its IP address.but I can't able to access it with the name of the computer for ex: \\akl13
I think that maybe that's the problem with the NetBios/WINS by VPN service
My question is how can I enable NETBIOS via VPN (site to site)
I enclose the configuration
ASA Version 7.0 (8)
!
ciscoasa hostname
domain default.domain.invalid
activate 2KFQnbNIdI.2KYOU encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
192.168.2.6 IP address 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.16.1.1 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
passive FTP mode
access extensive list ip 172.16.1.0 inside_pnat_outbound allow 255.255.255.0 192
. 168.4.0 255.255.255.0
outside_cryptomap_20 to access extended list ip 192.168.3.0 allow 255.255.255.0 19
2.168.4.0 255.255.255.0
pager lines 24
asdm of logging of information
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
no failover
ASDM image disk0: / asdm - 508.bin
don't allow no asdm history
ARP timeout 14400
public static 192.168.3.0 (inside, outside) - inside_pnat_outbound access list
Route outside 0.0.0.0 0.0.0.0 192.168.2.6 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
dileep STkzljfDxlzWJX9D encrypted privilege 15 password username
Enable http server
http 192.168.1.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 20 match address outside_cryptomap_20
peer set card crypto outside_map 20 192.168.2.7
outside_map crypto 20 card value transform-set ESP-3DES-SHA
life safety association set card crypto outside_map 20 28800 seconds
card crypto outside_map 20 set security-association life kilobytes 4608000
outside_map interface card crypto outside
ISAKMP allows outside
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
tunnel-group 192.168.2.7 type ipsec-l2l
IPSec-attributes tunnel-group 192.168.2.7
pre-shared-key *.
Telnet timeout 5
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
dhcpd lease 3600
dhcpd ping_timeout 50
enable dhcpd management
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the dns-length maximum 512
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
Waiting for your valuable response
In order to achieve a workstation through WINS name resolution, there must be a WINS server shared on two workgroups networks if you want. NetBIOS over TCP is a feature that is enabled in the settings of real network on the PC and not on the firewall.
-
Other services and support TCP/IP over NetBIOS in unexpected ways
Original title: completed service in unexpected ways
I have a problem with the windows services on two computers running Windows 7 Pro 64 bit. Both computers have four following services keep stop, all at the same time. In this case permanently at random time intervals. Second computer has a two other services below that also stop.
Reinstalling windows did not help. Install the latest windows updates or hardware drivers did not help either.
Thank you for all that help or referrals you can give me.
The support TCP/IP NetBIOS service ended unexpectedly. He did this 10 times. The following corrective action will be performed in 100 milliseconds: restart the service.
The service finished Windows event log in an unexpected way. He did this 10 times. The following corrective action will be taken in 60000 milliseconds: restart the service.
The completed Client DHCP service in unexpected ways. He did this 10 times.
The Windows Audio service ended unexpectedly. He did this 10 times. The following corrective action will be taken in 60000 milliseconds: restart the service.
Two additional services that fail on the second PC
The Security Center service ended unexpectedly. It has done this 1 time. The following corrective action will be taken in 120000 milliseconds: restart the service.
The service provider HomeGroup ended unexpectedly. It has done this 1 time. The following corrective action will be taken in 60000 milliseconds: restart the service.
Hi Corwin,
Thank you for an update and share information that allowed that it would help the other members of the community to solve these problems.
We are happy to know that you have solved the problem.
To respond to your request, I suggest you check the link to see the reasons behind the question:
Please let us know if you have any other questions about Windows.
-
Hi all:
Mystery - I have a Win 7 work company that cannot access a particular action. I get the following error-"you are not allowed to access \\server\users. Contact your network administrator to request access. However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.
Environment:
-Workstation and server at the same time in the same AD Windows 2008 r2 domain.
-All users, admin and non admin, cannot access this share when connecting to this computer only.
-ACCESS to the other actions on the same server, as well as actions on other servers.
-The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works! What the?
I tried:
-Deletion of the domain and add it again, no improvement.
-Check Event Viewer, nothing jumps (not red or yellow).
-Enabled auditing for access to objects on the server, it does not show a failure in the security event log.
-Turn off the firewall of my computer.
-UN-share and re - share the directory.
-Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).
For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother. I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.
In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users. Someone at - it some thoughts?
In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.
-
Hello
Don't know if this forum is still monitored by the Oracle team and if it remains just to post in the ovule. In any case, I posted the same on my blog here, but I hope this will help others to put it here.
I had some problems with the latest devices of Peoplesoft (for VirtualBox):
1. in/etc/selinux/config, SELINUX is not defined, it raises a lot of mistakes, to work around, I put it in "" disabled "".
2. the definition of report on FSCM92 node is undefined (I'm surprised because it is set to HCM92), have to do it manually
3. several Samba error like 'cannot connect to CUPS server localhost:631 - Connection refused", I added the"printing = bsd"line in the file /etc/samba/smb.conf to work around
4 when I started two of the devices, the Samba triggers another error like "register_name_response: server IP 192.168.1.20 rejected our VBOX < 20 name registration > IP 192.168.1.21 with error code 6, it's because the"netbios name"is the same on devices, change to something unique this problem (read file).
5. the FSCM92, the application does not start at the start of the server, to make it right, I did:
{code} [root@fscm92000 ~] # cd /etc/init.d
[root@fscm92000 init.d] # ln s/opt/oracle/TFTP/vm/appbatch-start.
[root@fscm92000 init.d] # cd... RC3.d
[root@fscm92000 rc3.d] # ln - s... /init.d/appbatch-Start S98appbatch-beginning
[root@fscm92000 rc3.d] # cd... RC5.d
[root@fscm92000 rc5.d] # ln - s... /init.d/appbatch-Start S98appbatch-start {code}
Hope that helps others and hope to have this problem on the next version.
Feel free to add questions that you can see and workaround if any.
Thank you
Nicolas.Hi Nic,
The questions you saw with our demo devices are addressed and will be corrected in the next update of these devices.
Thank you
-Sheshi
-
Change Netbios Computernames to get the list of servers
Hi all
I tried to change the name of computer netbios for multiple computers by using a script PowerCLI and came to a bit of trouble. Basically, I found the IP address of each computer, string split each IP address and then reconstructing the substrings use to rename computers.
Here is the script that I managed to put together:
#Getting list of IP addresses
$a = Get - VM | %{
foreach ($nic as $_.) Guest.Nics) {}
Write-output $nic. IPAddress
}
}
# String split IP addresses
$b = {foreach ($i in $a)
$i.split(".") Write-output
}New #Creating NetBios Computername of each IP address
$c = 2
$d = 3$e = while ($c - 10) {}
« 5 » + $b [$c] + $b [$d] ;
$c += 4;
$d = 4;}
#Switch each server of the old name with a new name matching
foreach ($i in $a) {}
get-wmiobject win32_computersystem - computername $i |
foreach-object {$_.} Rename ($e)}
}I was getting an exit that suggests that the script works and the computernames were changed, but when I check the looks that they all remained the same. I think the script could be ok up to the part where I try to change the old name and the new, and somehow, it is not able to use the array of new names in the for $e do.
Sorry if my script is messy or just completely wrong. Any comments would be immensely appreciated and please feel free to add suggestions or questions!
Thank you very much!
I missed the fact that $e can contain an array in your script.
If you cannot pass an array, but you must specify a specific item in the table to the Rename method.
Try to change the last part of your script as follows
#Switch each server of the old name with a new name matching
for ($i = 0; $i - lt $$a.count; $i ++) {}
get-wmiobject win32_computersystem - computername $a [$i] | foreach-object {$_.} Rename ($e [$i])}
} -
iOS 10 people record problem/question
Hello
I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times. Is anyway to update it for photo comes actually? At a few faces, I don't know that facial recognition found since it is coming from white.
Hi JohnP007,
Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
Difficulty faces and names mixed-up
If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.
- Tap the person you want to remove in the album of people > select.
- Type Show done face to emphasize his face in every photo.
- Press on each photo that is not the person.
- Type > not this person.
Hide people
You can hide the people or groups that you don't want in your album of people.
- Open the album people and press Select.
- Touch the people you don't want to see.
- Click Hide.
If you want to see the people that you have hidden, press on show hidden people.
People in the Photos on your iPhone, iPad or iPod touch
This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.
-
Questions - and answers forgotten
How to get my 'secret' answers to the questions that I have noted the way back when?
If you forgot the answers to your questions of security of Apple ID - Apple Support
-
I can't reset the security questions. We received notice as below:
Hello world
I can't reset the security questions. We received notice as below:
"Cannot reset Security Questions."
We have insufficient information to reset your security questions. "
Please help me as soon as possible! Thank you very much.
Hello
You will need to contact the Apple Support.
The information is available here:
Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
(I'm afraid that no one here can solve the problem for you - this is a user-based community).
-
Question of cloning for SSD upgrade on 12 Macbook Pro
Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD. For about a month and so far without problem.
Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6). I got a Crucial SSD MX300 to replace his HARD drive. Crucial comes with (or recommend) Acronis software. And a lot of the messages of the forum recommend Carbon Copy Clone.
My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)? This time, I'm upgrading HARD drive and I don't know if something is different. At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.
Thank you.
Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.
Maybe you are looking for
-
"ati2dvag.dll" has stopped working on Equium A60 - 173
I posted this problem before, but despite the advice I got to reinstall the drivers from the Toshiba site. Unfortunately the problem persists. What is happening is that the display shuts off for a few seconds then reappear with a very low resolution,
-
Fuzzy video after recording to computer
I'm the video editing and then changing all the clips and transitions look great. I then record on my computer and play in windows media player and the video is blurry, but the stills are very good. I can't find a specific fix for this
-
In Outlook Express, the spell check does not recognize the words because the language is set to French. When I go to tools then to change English spelling and click the drop down arrow ago only French, any other language. What can I do to get the E
-
2 groups of House on 1 computer network
I have a group of 3 computers and a laptop, I go to my daughters at home, where she has a home for 3 Computers group, I connect to its network with my laptop, but I am unable to connect to my network with my laptop, without changing home group, I wou
-
External hard drive not seen on computer
When I plug my external hard drive on my laptop, it does not show. Entered the command prompt and you can see it o.k.Should it have a letter designation and if yes, how can I do this on Windows 7 Home Premium.