Questions of portable Bootcamp

Similar Questions

• Question AHCI with Bootcamp Windows 7 on Macbook Pro (please help!)

  Hello, I've been running into issues with my Early 2011 15 "Macbook Pro since I used Bootcamp to install Windows 7 64 bit Home Premium on my new Samsung 840 Evo SSD, I installed in it." What I read, it meets the criteria to run AHCI, but for some reason, I can do activate or install the Intel series 6 Chipset AHCI drivers.

  I was thrown around the web with people saying: they got their SSD to work on the Windows partition, but I can't understand what I'm doing wrong.

  Here is the link that I got more at Apple, which has all of the other information that you might be looking. If this isn't the case, please post and I will reply as soon as possible.

  https://discussions.Apple.com/message/26326822?ac_cid=op123456#26326822

  Help, please! It drives me crazy, and I really need this working classes begin about a month.

  Thank you in advance for your time and effort.

  Hello

  Thanks for the reply.

  As directed by the error that you have given, I suggest you follow the steps below to install the drive in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  Let us know the status of the issue.

• GOOD QUESTION ON PORTABLE WINDOWS 8

  Hello

  I have a laptop from Samsung which has window 8 on it (I haven't done the 8.1 update yet).

  Recently the noise stopped working for no apparent reason. The speakers do not work and a helmet or any other external device connected does not work either.

  From what I can tell, the sound card/driver is Realtek High Definition Audio. Windows tells me that the latest driver is installed.

  How can I solve this problem? What do I have to uninstall and reinstall the drivers?

  Thanks in advance :)

  Hello

  I appreciate the steps you tried to solve the problem.

  Please answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2. are you aware of changes to the computer before the show?

  This problem normally occurs when the audio driver is not updated to the latest, or the driver installation may be corrupted. Before uninstalling the driver, try to run the troubleshooter to see if there is a problem with the system.

  Method 1:

  Let us make sure that the audio drivers are updated by visiting the computer manufacturer.

  You can see the steps mentioned in the article. You can run the audio Troubleshooter and also update the drivers.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also:

  Method 2: Uninstall and Reinstall Audio driver

  You can uninstall the driver from Device Manager.

  a. press the Windows key and the R key to open the prompt to run it .

  b. type Devmgmt.msc and press ENTER to open the Device Manager.

  c. click on the forward arrow audio, video and game controllers.

  d. right-click on the Audio driver, you see and click Uninstall.

  e. you may asked to delete the driver software. Press Yes to continue the process.

  f. close the devices window Manager .

  You can check with the manufacturer to find the latest version of the audio drivers to the computer.

  Hope this information helps. Response with status so that we can help you.

• Is a bootcamp VM faster then a virtual machine that is based vmdk?

  Performance question: is a bootcamp VM faster then a virtual machine that is based vmdk? I guess the only reason why make it faster would be to drive, reading and writing.

  Are there other benefits of performance?

  Hello

  Not a bootcamp VM is not really faster like a normal virtual machine.

  I understand your reasoning, but unless you open a lot of clichés about the virtual machine performance is almost identical or similar vmdk founded against based training camp.

  Which btw is highlighting a disadvantage of bootcamp VMs, you can not snapshots.

  Of course, if you start your VM bootcamp in native mode (and not as a virtual machine), you have a performance increase as you then run native on the material.

  --

  Wil

• What you can say about Satellite L30-134

  I have to buy laptop for office work? and I choose Satellite L30-134? What do you think? It's my first time when I buy the laptop... I have only 700 maybe $ advise you something else? and second question why portable seria L30 have only 1 year warranty, and what cost per the warranty extension?
  My English in not very good, sorry. Thank you for your response.

  Hello

  The L30-134 is a portable simple to office applications and internet usage.
  But it s not suitable for hardcore gamer because of the hardware specifications. As far as I know that the laptop provides Intel-Celeron-M (Yonah) 410 1.5 GHz processor and ATI RADEON Xpress 200M 32 to 256 MB shared video memory graphics card.

  The standard warranty is 1 year and if you sign up on the page of Toshiba notebook you will get a 2-year extension

• Re: Satellite P850 138: Wireless connection drops

  Hello

  I'm having the following problem:

  Sometimes the WiFi on my P850 138 will drop and the symbol beside the clock network connection displays an exclamation point.
  To solve the problem, I have to open my wireless network connection and disconnect and reconnect to my router manually.

  My P850 138 is connected to the internet via a connection from WPA2-PSK with a BT Home Hub 3.
  Note: The connection to the router is actually not lost, just connect to the internet.
  Also, the router remains connected to the internet.

  I would really appreciate some advice.

  Thanks in advance!

  > In order to solve the problem, I have to open my wireless network connection and disconnect and reconnect to my router manually.

  From my point of view this is not question of portable but a router problem.
  Have you tried to connect the laptop to another wifi hotspot in your area to test the feature?
  Recommend doing this

  In addition, you can also check if there is updated firmware for Wlan hub.

• Slow performance Equium A60

  Hello... I was hoping for some advice on my lap - top. Since I had the A60 I was extremely disappointed by its performance. Again, it may take up to 8 minutes to just get started. When applications are opened again, it can be painful waiting for him to run. Is this normal? I've updated the bios and drivers in the hope that it would make a difference but it didn't. I have 256 MB of memory installed... so I guess my real question is... The memory upgrade will make enough of a difference or it's not worth bothering with? Just another thing... it seems summer mentioned previously, but what thought toshiba to place the fan in a place like this? I read some people saying that you should not put on your knee... When I use it... I have to balance in a uncomfortable position so that the cpu is not overheating and restart. Why call it a Lap - top in my opinion if you can't put it on your lap. Is there a solution to this problem too? Thanks in advance...

  Snoot

  8 min sounds long enough for XP start up my A60-181 only takes about 2 min. Much can count on what programs you have installed and set to autorun, including the stuff you ignore as spyware adware BHO (browser helper objects) can really hit the performance of Windows. I would recommend running some programs like Spy Bot S & D, Adaware and webroot.com Spysweeper scan. Also access the BIOS at the beginning with Esc then F1 tune of processor at the maximum power that could help speed up the boot process. Windows XP has really need 512 MB of RAM to work properly even if 256 MB should not be a problem, you can not run so much without your busy paging RAM hard disk. I'm surprised Toshiba provide not all laptops with 512 MB as standard considering the cheap means of RAM has become these days, but this is just my opinion.
  Anyway, to answer your question about "portable computers" back in laptops old times did not use flat on the heat so them sitting on his knees was possible. However these days, probably you could fry an egg on them it's quite scary how hot they get. I'm also a little angry fans CPU design, that I can't sit my laptop on the carpet and let alone the bed I have on cardboard to keep the air flow going.

  Richard S.

• HP pavilion g6 - D1M67EA #ABH: Windows 8

  Hello HP,.

  I have a question
  my portable hard drive was broken, now I replaced but have no windows 8 I heard say that the key of Windows 8 in the bios so that no problem, but how do I instal Windows 8 without CD? (Windows 8 was already on the PC when I bought it)

  ISO of windows 8?

  (cell phone use linux now)

  Hello

  There are two options available.

  1. you can order a set of replacement of the recovery media using the relevant link below - this will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.  I assumed the model no of your laptop that you live in the United Kingdom - if this is correct, you can order recovery media in the HP partner on the first link below.

  https://www.best2serve.com/page/rcd_search?utm_source=HP-customer-care&utm_medium=referral&utm_campaign=RCD&utm_content=part_717447-331

  If you live anywhere else, start on the following link.

  Order HP recovery disks.

  2 another solution would be to download the Image of Windows 8 on the following link - Note this Image file is subject to a ceiling of download, you may need to try over a period of a few hours before the download starts correctly.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  If you instead create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  As you know, the product key for Windows 8 is encrypted in your bios chip and read automatically during installation.

  Other software and drivers you need can be found here.

  Kind regards

  DP - K

• Inspiron upgrade (redirect) 15R of non touch screen touchscreen?

  My Dell laptop is Dell Inspiron 15R 5521 not touch. and I think if I can go to the touch screen. :)

  Milton19,

  This is the forum for external monitor stand alone. Please repost your question on portable hardware General forum.

• Handful of sequence data contains incorrect values when loading the saved project

  Hi people!

  
  

  I ran into a problem where my values of sequence data are not correct when you open a project with an instance of my effect plugin.

  The values look good if I manually inspect when they are flattened and written in a fine when handle memory and restore AE sends PF_Cmd_SEQUENCE_RESETUP once the backup is complete.  But when I open / load the saved project, the values are not correct.  In other words, my logic flattening/unflattening works within the same session, but during the loading of a saved project, the flattened data is incomplete or has bad values.

  I write several objects to the handful of flat sequence data, and I was wondering if this could be the cause.

  The flattened sequence data manage memory looks like this:

  [[type struct A] [type struct b] [b] of type struct] [struct type b] <.. .arbitrary number of struct type BS... >]

  NB of struct type B varies, so when I ask AE for a handle of memory, I have this:

  size_t flatSequenceDataSize = sizeof(structTypeA) + (sizeof(structTypeB)* numberOfBStructsNeeded);
  PF_Handle flat_seq_dataH = suites.HandleSuite1()->host_new_handle(flatSequenceDataSize);
  
  
  

  Then, to write the data to the handle:

  structTypeA myDataA = <... populate struct values ...>
  std::vector<structTypeB> allStructB_V;
  <... populate vector ...>
  
  void *flat_seq_dataP = suites.HandleSuite1()->host_lock_handle(flat_seq_dataH);
  
  structTypeA *structA_P = reinterpret_cast<structTypeA*>(flat_seq_dataP);
  memcpy(flat_seq_dataP, &myDataA, sizeof(structTypeA));
  
  structTypeB *structB_P = reinterpret_cast<structTypeB*>(flat_seq_dataP);
  
  //offset pointer by the size of the first struct in the handle
  structB_P += sizeof(structTypeA);
  
  for (A_long vectorIndex=0; vectorIndex < allStructB_V.size(); vectorIndex++) {
      *structB_P = allStructB_V.at(vectorIndex);
      structB_P+= sizeof(structTypeB);
  }
  
  out_data->sequence_data = flat_seq_dataH;
  suites.HandleSuite1()->host_unlock_handle(flat_seq_dataH);
  
  
  

  When I access the handful of sequence data loading stage, the first struct in the flattened handle has correct values, but all following structs have false values.  I check if the handle is always the right size (I save the size of the handle inside the first structure) and it is indeed the correct size.  I wonder if AE doesn't like how I write from the structB to the handle.

  I'm doing something wrong here?  Is there a better way to store data of arbitrary sizes?

  Thanks for your help!

  -Andy

  Ah, I missed actually a significant error in your pointer arithmetic! You're actually in the land of UB ("undefined behavior") with your code!

  You add byte offsets to a pointer type, which is doomed to failure if you don't know what you're doing.

  If you have

  structTypeB * structB_P = reinterpret_cast(flat_seq_dataP);

  and do you

  structB_P += sizeof (structTypeA);

  most of compiler that turn into something like this:

  structB_P = (structTypeB *) ((unsigned char*) + sizeof (structTypeA) * sizeof (structTypeB));

  Wrong in your case (in most cases actually).

  Or more simple put:

  If you have a pointer

  structTypeB * structB_P =...

  and you do:

  structB_P += 3;

  It actually means

  structB_P = strucB_P + 3 * sizeof (structTypeB);

  already!

  Try running your pointer to an unsigned char * or another type of 1 byte basis and then make the increment, and then recast.

  Here's a site with more information on this:

  http://StackOverflow.com/questions/15934111/portable-and-safe-way-to-add-byte-offset-to-an y-pointer

  It could then look like this (on the top of my head, did not check!):

  void * flat_seq_dataP = suites. HandleSuite1()-> host_lock_handle (flat_seq_dataH);

  structTypeA * structA_P = reinterpret_cast(flat_seq_dataP);

  memcpy (myDataA, sizeof (structTypeA) & flat_seq_dataP);

  structTypeB * structB_P = reinterpret_cast(reinterpret_cast(flat_seq_dataP) + sizeof (structTypeA));

  memcpy (structB_P, allStructB_V.data (), sizeof (structTypeB) * allStructB_V.size ());

  out_data-> sequence_data = flat_seq_dataH;

  Suites. HandleSuite1()-> host_unlock_handle (flat_seq_dataH);

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.

• Luvin 3.1, but just a few questions on machines with bootcamp...

  Hi all, v3.1 is fantastic and everything works fine. But I have some questions that the admin of de facto in a studio with lotsa imacs. What I do for machines with boot camp, it is creating a WINCLONE of an image for deployment and perform restorations on the machine with bootcamp when I want to update. Works perfectly :)

  But I wonder if using VMWare to make updates on my main image will in any way mess things, in other words, when a player of bootcamp partition running virtual in VMWare interface, installation of software and whatnot will be the same as if the installation of the software if the native boot? In more words, have VMWare tools installed on the Boot Camp partition will do anything to disrupt things when running native than boot camp?

  Many Boot Camps that I update don't have VMWare installed, because they are mainly used on the side PC anyway, to these people that I can not/never get clean windows. I want to assure you that I am not having problems using VMWare on the master Bootcamp partition that I use to clone.

  And just a side note: while I like your product, I can't tell you how much not having not not firewire support in virtual images is to play with a / V. Heads We absolutely need to have support firewire audio and video workstations. If there is support, I would never mess with boot camp again!

  Well, thx and hope to hear from you soon.

  Jigs

  Herojig says:

  But, I wonder if using VMware (Fusion) to make updates on my main image in any way will mess up things, in other words, when a Boot Camp partition drive is virtual running in the interface of VMware (Fusion), installation of software and which will not be the same as if installation of the software if the native boot? In still more words, will have the VMware Tools installed on the Boot Camp partition anything to disrupt things during this training camp native execution?

  Yes, you can perform maintenance of software (for example patches from Microsoft) for the Boot Camp partition in VMware Fusion almost identical initializing natively in the machine.  The only differences are the detection for device drivers that need to access the host hardware to update (this should be very rare).  Update in general things like Windows, Office, Adobe CS/Acrobat, etc. will be fine.

  As for VMware in Boot Camp tools, virtual pilots are designed to remain latent (inactive) without any problems, that is not loaded == not used.  There is only one question: activation software updates.  VMware swap files of activation for Windows and Office preserve activation in each environment.  If you move the activation of copies of Vista, 7, Office 2007/2010 via WinClone, this will trigger reactivation.  Also starting in VMware Fusion will require more activation by machine for VMware environments and British Colombia are activated.  As long as you don't replace Boot Camp partitions, activations should stay.  For the use of this type of activation, he preferred to a Service (KMS) key management to manage your licenses on site because copies at retail have limited the number of activations.

• Update the graphic driver for Bootcamp 6.0 questions

  After you perform a new installation of Windows 10 1607, I proceeded to install Bootcamp AppleBcUpdate.exe drivers on my MacbookPro 11.5 i7 Dual Graphics.

  Everything worked fine after that restart once the installation has been done. Now I checked the Apple software update, and he gave me a few updates. Specifically the bottom three in the picture below.

  

  It restarted after that and then 'Apple Software Update' update itself twice before offering a new version of the graphics driver.

  This update has screwed up the system. Auto brightness doesn't work anymore. The brightness keys don't do anything. I reinstalled bootcamp on a fresh drive to isolate this problem.

  Does anyone have a solution to this? Any suggestions? If everyone Apple never bother reading this, then please test your drivers before you send them.

  Delete Windows, re - install, create a Windows system restore point, disable all updates Intel GPU and then apply the updates and test.

• BootCamp Windows 10 questions

  Hello

  I have a 27 "iMac late 2015, retina - 5 k, bought a few months ago and El Capitan (OS X 10.11.5) running

  I recently bought a 10 Windows in order to create a dual boot. Of course, as I write here, it did not work.

  I tried everything I could.

  First, using the key provided with the Win10 USB I created an ISO. I placed this ISO on another USB drive and follow the instructions in using BootCamp I would get an error in this direction: BootCamp does not install, there was not enough space to create a partition. -Obviously I have a lot of space.

  Secondly, I copied the ISO on my desktop and restarted the process. Same result.

  Thirdly, I downloaded an ISO Win10 of MS, placed on the desktop and restarted the process. In this way, BootCamp has been able to create a partition and the computer restarts and you are prompted to install windows. After inputing the windows product key, I chose the "BOOTCAMP", formatted drive (to be noted that the name has changed), selected it and after hitting "Next", I get an error something like this: we could not create a new partition or locate an existing one. For more information, see installation logs.

  Any suggestions?

  1. use the ISO downloaded from Microsoft. It should be an ISO only 64-bit. It cannot be mixed.

  2 put the ISO in the Documents folder and do not.

  3. disconnect the external storage and perform the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  4. run the wizard of BC and try to install Windows.

  5. Please visit https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for the detailed steps for your model. Your model does not use the USB for Windows installation, and does not support the creation of a Windows USB Installer. Do not change the file info.plist Bootcamp to create a workaround solution. It will cause other problems.

  Please see also

  Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Supportfor reference.

• question of Bootcamp after failled to install W10

  Hey there

  I tried to install windows 10 on my

  Mac Pro (end 2013)

  2.7 GHz 12-Core Intel Xeon E5

  64 GB 1866 MHz DDR3 ECC

  1 tb SSD

  Dual AMD over-pants D700 6144 MB

  so after using the bootcamp assistant and an 80 GB partition for windows then when started windows setup he would see the bootcamp partition I would format it to NTFS and then he would say that windows does not have the necessary 8xxxxxxMB and custom let me install =...

  I tried different partition size, but has not changed anything on my last ttry I repartitioned the partition bootcamp Installer windows 10 but that did not help and I have always been impossible to install windows.

  I am able to boot OSX normally but now iwhen I try to run the wizard bootcamp its give me this message:

  The startup disk cannot be partitioned or restored to a single partition.

  I also have the OSXRESERVED list up\ partition.

  any solution?

  Thank you

  You have two additional partitions - OSXRESERVED and the one you created using the installer. Please after the output of the following command since OS X Terminal.

  diskutil list