Questions of the Gobi 2000 3 G module

Similar Questions

• GOBI 2000 (78Y1399) and GPS

  I wonder if the ThinkPad GOBI 2000 Broadband Option (78Y1399) contains the GPS, and if not, what is the module for the W510 which contains the GPS hardware. Thank you!

  Hello mate,

  The Gobi 2000 have a GPS. You just need to have a sim card inserted for use.

• E120 Lenovo Edge - cannot detect the WAN of GOBI 2000 map

  Hi, I hope someone could help.  I bought an E120 that my country does not see the X120e

  I bought a card WWAN of GOBI 2000 dealer of Lenovo.  The card passes through the white list very well although it is not mentioned as one of the taken WWAN devices supported.

  I tried to install the 7xwc48ww.exe (drivers X120e and Edge 11 WAN) to see if it would work.  The GOBI loader installs, but the driver does not load, sense - in device - PORTS - Gobi charger Manager

  -In device - network adapters - No. Gobi WAN Card Manager

  I also tried the solution-http://curiouslynerdy.com/2009/05/qualcomm-gobi-wwan-card-on-windows-7/ , but still no joy.

  According to me, the X 120 and E120 are very similar, so I guess the Gobi WAN should be able to work.

  Can anyone suggest an alternative?

  Thank you very much!

  The E120 Edge is like the X121e GOBI 3000 or F5521gw will work. I tried a GOBI 2000 in my E120 with the same result as you.

• Resume Quiz button goes to good question 1, but then displays the content between the questions in the module

  I am using Captivate 8, win 7 64 bit

  I have 4 modules with graded questions after each module. When I click on the Retake Quiz button on the failure of quiz, I got properly into question 1/quiz module 1. But after receiving questions from module 1, I am taken to the content of module 2. Etc.

  How to display only the questions about the failure of quiz? The revisions quiz option on doing just that - questions only - no intermediate content.  Why not the possibility to resume the Quiz?

  Thanks for your help!

  SMILES,

  Susann

  Sorry, it's the design of slides of the Quiz, fairly strict rules. You can replace it using a conditional or shared tip action on enter for each or the first, according to the linearity of the course, slide after a slide of questionnaire content. There is a variable cpInfoAttempts of system quiz that is incremented each time you click the button back. It has the value 1, the first time you take the test. If you create a condition like "IF cpInfoAttempts is greater than 1, you know you're in at the second attempt. At this point, you can jump to the first question slide in module 2.

• Gobi 2000 wwan undetected

  tried to install the gobi desert in 2000 on the Tablet, I get the message wwan undetected, where can I find the drivers for it

  Steven

  It probably won't work. WWAN module is qualified for the TPT are Gobi3000, F5521gw Ericsson and Huawei EM600. I assumed that, like the ThinkPad standard, all the other modules are rejected at the level of "BIOS", so even that if you find Android drivers for other cards, you wouldn't be able to get the card working.

  In addition, it is not as easy as Windows to install drivers for the new hardware.

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• A few questions after the downgrade of Win 7 on Satellite U940 - 11L

  Hello

  friend of mine bought the Toshiba Satellite U940 - 11L which had Windows 8 on it, due to some reasons that she wanted to have Windows 7 installed on it, which was pretty easy.

  Trouble came with the installation of the Symantec touchpad, after installing the drivers, it worked for about 10-15 minutes but then it stopped working.

  Tried to uninstall and install again but no luck, found a few discussions where it was suggested to remove all the devices, remove the battery and the power cord.

  Press the power button for 15 seconds and then power back on but still not lucky (I wasn't in the restoration of the default settings of the Bios I did not any change it outside disabling secure boot and replacing UEFI CSM that was needed to run win 7 on it).

  Tried about 4 different sources when it comes to the drivers but still does not work. I checked the Device Manager Dev but see no conflict, and it shows that the unit works fine but the problem persists. Please note that the drivers were specific to windows 7.

  Please if you have any suggestions we would greatly appriciate it.

  On another note, I'm not able to install the bluetooth it (HW ID shows as ACPI\TOS6205), I tried to install it several times but no luck because it always shows as unknown device in the dev Manager. The driver that I use is Bluetooth Filter Driver Package as info.

  Also, the computer is slower than it was with Windows 8, I suspect the reason for this is the fact that the installation of win 7 I accidentally erased part of the hybrid drive SSD (the size was 11.2 GB if I remember correctly, yes silly me...). I wasn't looking for a while on the net to see if there is a way to fix it but no luck so far.

  Thank you very much for your time and your suggestions!

  Tony

  With regard to the question of the touchpad.
  To my knowledge, the touchpad should work even if the Synaptics touchpad driver has not been installed. Windows system contains own driver that control the touchpad and provide standard settings. Of course after installing the Synapatics driver, you should get a few more options and features more touchpad.

  I recommend you to download the driver for the touchpad from Synaptics driver page and install it again: http://www.synaptics.com/resources/drivers

  With regard to the problem of BT.
  The laptop supports WLan Intel (Intel Wireless-N 2230) card that supports BT connectivity. Bt driver filter pack is ONLY necessary if you laptop would use an Atheros WLan card or Realtek WLan card. For the Intel WLan modules such package of filter is NOT necessary. To get BT to work, you must install the battery Toshiba BT!

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Update of disk with the Portege 2000

  First Post! I am the proud owner of gently used Portege 2000.

  Browsed the web trying to find out if the Portege 2000 will be one hard disk other than the MK2003GAH. I have a MK4004GAH, but when installed it does not seem to be detected, the BIOS reports no HDD installed. The reader might be deffective of course, but I have nothing else to connect to and of course I can't test it because it is not detected.

  In addition, the 2000 does not use standard PC100 SODIMM? When I removed the RAM cover, it does not resemble a standard SODIMM slot.

  Thank you guys

  -max

  Hello

  I no a lot of experience with this Portege, but I can just confirm that this laptop comes with 1.8 inch Toshiba MK2003GAH HARD drive. I don't really know which are hard are compatible with this model of laptop but maybe partner allowed in your country can give you precise information on this subject. They are specialized for the upgrade of the laptop.

  On the module of RAM I found information that the Portege can manage with 512 MB max and module compatible memory PC133 256 MB - PA3158U - 1 M 25.

• Tecra M3-760: Question on the recovery CD - procedure

  Salvation;
  I have a tecra m3 760 and I want to know if it is possible to restore my laptop with the recovery cd without having to install additional software like norton internet security, windvd etc.
  I want to install only the drivers and windows. I know that I can uninstall the software after installation, but I'd rather try to install with this software.

  Another question, do you know where can find a manual recovery CD?

  Thanks in advance, controlaltdel

  Hello

  On the Toshiba Recovery CD, you will find an image file. This file contains all of the drivers and software and it of not possible to install this image without the stuff of Toshiba.
  As you say after the recovery process, you can delete all not important applications.
  Well, the other option is to install a new original Microsoft Windows, and then install the drivers of Toshiba. The drivers, you will find on the CD of tools & utilities delivered.
  It is important to install drivers in the correct order.
  Common modules, graphics driver, utility Chipset, etc.

  You can follow the order on the tools & utility CD.

• Question on the extension memory on the Satellite A80 117

  I have a question about the compatibility of memory.
  (The A8-117 is a Centrino 1.6 GHz (Pentuin M 730 processor) with Frontal 533 MHz bus and 2 MB of level 2, Intel® 915GM Express chipset)

  At the moment I have 1 chip of 512 MB (333 MHz, 2.5 CL) installed. I intend to switch to 1.5 or 2 GB. So what bothers me is: can I install a DDR2 533 MHz modules on this laptop (in this case the old 333 MHz one out)?
  Official website of Toshiba only 333 MHz DDR are provided, so that the 915GM express chipset allowes it.

  If it is not possible to 533, I guess I'll just buy 1 extra GB of 333 MHz DDR.

  Thanks in advance!
  Bostjan

  Hello

  At first, I want to say, which is always recommended to use RAM compatible and tested modules. On this way, you will be sure that it will work well and without any problems.

  According to the specifications of the laptop you can upgrade RAM to 2 GB max and compatible modules are: PC2700 512 MB (PA3312U - 2M 51) and 1024Mo PC2700 (PA3313U-2M1G).

  You can use faster RAM modules, but for me it is really not necessary. The specification of the laptop is the 333 MHz bus speed and faster modules will be not useful for laptop runs faster. It is best to buy 2 x PA3313U-2M1G and you will have no problem and portable will runs much more quickly than before.

• A few questions on the framework of the actor

  Hi all

  I tried to get my head under the actor and begins to see the light at the end of this tunnel-no need of sunglasses right away, because I have a few questions remaining:

  1. data transfer :

  So far I've had a quick glance the evaporative cooler model and actor model, as well as worked through the LabVIEW actor Framework Basics by labvolution. These examples are pretty clear for me now. What I don't understand though, is how you are supposed to provide "real" data These examples use only references and then update using the "value" property This may not be very fast, but is probably still enough for user interface applications. But what happens if I have a player who generates data by reading example of a card and I have, let's say, want to detach this far from the data backup process in a file. How I would pass large amounts of data between stakeholders effectively.

  2. using the framework of the actor with RT:

  In presentations to the AF, I saw that they always mentioned that it was completely "capable RT. While this may well be true for the RT itself system, yet once I wonder how to transfer data from an actor of the RT of a player in Windows. Yet once again, suppose I want to generate data on a cRIO and save that data on the host PC. I will establish a channel of communication between the target myself by network flow or similar? It defies any sort of encapsulation of the AF in my opinion...

  3. set the actors:

  However, what worries me the most, is the definition of the actors. How can you know what is a player in your system? Each card set as an actor? Define you each device as an actor and consolidate all I/o to the breast? Is there an easy way to know how to set the actors?

  4. technical support:

  While working with the examples, I found that the debugging can be quite difficult. I had several cases of "Not executable Subvi" this point through several other live who finally call something dyynamically and from there, you discover that one of your screw is broken. Is there an easy to know what is the problem? I know there are modules for LabVIEW that are designed to turn on debugging part of the actor, but who would not be available in a review of the CLA, where you will have only a base installation of LabVIEW.

  5 root and nested actors:

  Finally, I wonder what root and nested average actor. So far my understanding is that the actor root is the parent actor you cast in the launch of VI and nested the actors are all children who serve the actor parent and are, most of the time, launched since the actor-actor of parent nucleus. Is this correct? Is there a better definition of it?

  Any help on this is greatly appreciated. I'm looking forward to the discussion and interested if you frequently use the framework of the actor or if you have abandoned it even once after using it.

  See you soon,.

  Pete

  A good place to ask the question in the framework of the actor is in the community:

  https://decibel.NI.com/content/groups/actor-framework-2011

  And Yes, I've used and uses the framework of the actor.

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• Relay control using cRIO LabVIEW and the NI 9472 c series module

  Hi all

  I try to get my program to run so far without success, and need help.

  I use the compact rio with the program on labVIEW and the NI 9472 digital output module. I enclose my VI.

  Basically, it's a test program to run an algorithm at a time. If I use a solid state format to get a time warp that dictates, time of execution of the algorithm. The operation by default, I put is for when the time channel produced a fake.

  Question 1: The problem I have is that even if the time string is true, as it does not run. It remains in State sending false so only of false signals to my relay (which is represented by the round LED - relay switch a solenoid on and outside).

  Question 2: If I can get 1 problem solved, the next step I have will be executing the same algorithm, but for more than a State of time. For example. "06:00" run algorithm. I want this algorithm to keep running as long as he sends signals REAL (which means the solenoid valve remains open until a WRONG signal). Then he will run again to say '08:00 ', execute the algorithm as long as he sends signals REAL and so on...

  In summary -.

  -I want to order a relay (which controls a solenoid)

  -L' use of components listed above

  -With the help of semiconductor in labVIEW (VI attached)

  -At different times, the execution of the algorithm UNTIL sends the WRONG signal and then return to the default state, which means that his waiting until the time channel product TRUE.

  Any help would be appreciated.

  Kind regards

  William

  something like that...

• I am looking for regentry.chm of the Windows 2000 Resource Kit.

  I am looking for regentry.chm of the windows 2000 resource kit

  Hello

  Because you are using the Windows 2000 resource kit, it will be better to post the same question in the Technet forums and check if it helps.

  You can follow the link to your question:

  Windows Small Business Server: http://social.technet.microsoft.com/Forums/en-us/category/sbsserver