questions pool expanded memory

Similar Questions

• Expandable memory - SD card

  Your bio products indicates that the memory for 7 Slate is expandable via-

  • Supports MicroSD Card expandable memory

  Are there specific characteristics with regard to the SD card?

  That is to say, should be a particular category?  (I understand that the class 10 is latest technology)

  In addition, if the SD card is a type (again, also latest technology) SDHC card it will work in the device?

  I am looking to buy a 32 GB micro SD card, but want to make sure I buy the right product that will provide an optimal functionality.  (The example product description -"

  «Samsung 32 GB genuine micro SD SDHC class 10 Full HD Vid 32 GB microSD memory card»

  It is usable in the 7 Slate?

  Please notify.

  I understand that you want to know what type of card MicroSD will work best in your 7 Slate.

  The specifications indicate that it supports MicroSD, but there is no more specific than that.  I can confirm that SDHC cards work, at least my SDHC card worked without problems, in the 7 Slate.  SDHC is the best format to use if you use the card apps or just to have a read/write speed.

• Updated November application nonpaged memory being increases dramatically and expanded memory is abnormally low.

  Last Tuesday, I installed the following updates on most of my servers (WinServer2003).  Since this related restart, not expanded on a server memory has continued to increase.  Normally, it levels out at about 60 000 KB and then rises slowly at a rate of approximately 5 000 KB per week.  Since the restart of Windows updates, last Tuesday, it rose to almost 250 000 Ko in a little over 3 days.  (I restarted Friday hoping that it was pure coincidence that would set a restart - no luck).  It increases at a rate of approximately 50 000 KB per day instead of 5 000 KB per week.

  While rises in nonpaged memory, expanded memory is strange.  Normally it fluctuates wildly around 210 000 KB, but now it seems to stabilize in a constant 100 000 Ko.

  What made updates to change my server?

  Last Tuesday, I installed the following updates on most of my servers (WinServer2003)...

  I think you forgot something...?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• EMM = ram under XP - pro config.nt not providing expanded memory...

  Someone told the config.nt appropriate declarations to produce memory EMM extended in a MS-DOS command.com window... try to get the Infoselect running.  Continue to be "memory allocation error.  Cannot start COMMAND, outgoing"and mem/c shows no expanded memory.

  Any help for my XP - Pro T61... gratefully received!

  Necessary T61 network ROM disabled in the BIOS to provide space for EMS pageframe which BACK program Info select necessary.

  See http://www.columbia.edu/~em36/wpdos/emsxp.html

  Disable internal network ROM was all it took for me.

• Question of cleaning memory of blackBerry Smartphones

  Hi all

  While not not new to BB, I'm new on my Storm 9530. That being said, I have a question about the memory cleaning option on my BB Storm. Should I allow it and let it run all the time or should I just use if necessary. Any help will be appreciated. Thank you

  I leave it on on my Storm. I know that the manual inside the applications folder can actually reduce the amount of RAM free. I had 32MB or so free, ran the Manual vacuum and ended up with about 28 MB.

• CP9: partial marking is available with question pools?

  Hello!
  I want to use questions range from MC with partial credit and I want to give negative points for incorrect responses.
  Although this doesn't seem to be a problem, while the question slides are included in the main project (under PROPERTIES > Options I can attribute points to a negative response), the possibility to select the partial partition disappears when moving the question to a question pool and I can not assign different scores to individual responses.

  In this forum, I do not find a solution for the previous versions of the CP; does anyone know if a solution is available to CP9?

  Thanks and regards, Joerg.

  No, partial credit is not available for questions in a pool, not even to the CP9.

• How can I add questions to the question pool, after the questions have been created.

  I created issues in captivate, but did not create the through the pool of question Manager. I want to make in a pool of question now. How can I create a pool after the issues have already been created?

  Go to Windows > Question pool to activate the tab that displays all your Question Pools.  On the Filmstrip, do a right click on a question slide (or a group of slides) and choose the context menu option to move them into a pool.

• Zero Question pool refurbishment

  I created a game in which you select a category, go to a slide pool question based on your category, then returned to the game slide after answering the question. After playing with him several times to get it to work and looking as I wanted, I found anywhere, anytime I chose a category, it flash white for a fraction of a second and then return to the slide in game. I thought that maybe I had answered all the questions in the question pool and so this was the way he was telling me. However, after you clear the cache and restarted the computer, I still had the same problem. Is there something I can do to reset question pools in my game, or it could be another issue goes?

  Thank you

  Darin

  PS: Here is my Advanced action that says what to do if the user gets the correct question.

  

  Mystery solved. I had placed an advanced in the section action on enter the slide of quiz saying back to the slide of the game board. I wanted to have this action as a response to the question of if the user gets the question right or wrong.

  Darin

• Is there a maximum limit for Question pools in the Adobe Captivate 8 SCORM project?

  You want to know if it is necessary to create SCORM content with question pools 27 120 issues all together. Does anyone have idea if there is any limitation in SCORM 1.2 or Captivate?

  I didn't know all the data to indicate the Captivate imposes a limit on the number of pools or the number of questions.  However, SCORM 1.2 has a relatively small allocation of data from resumes and this can sometimes cause problems with big quiz.  But the usual problem that cause relates to bookmarking of the course if the learner should end their attempt to session before completing the module and then later resumed where they had left him.

• Role specific question pools

  I would like that the learner to be able to select a button which determines their role (assigns a specific role variable value), then see the quiz questions that are specific to this role. The quiz is required (cannot be ignored) so I use the 'Answer All' setting quiz (Quiz > Quiz Preferences > settings > required > Answer All) which means that any question slides must be filled in order inside the course (I can't separate the 3 quizzes). I thought I could create a pool of separate question for each role and then that Captivate displays the pool that corresponds to the selected button. Is this possible and how?  If not, is there another way to achieve this result? I use 7 Captivate.  Thank you

  If you insert a slide at random, you must enter the pool, there is no way to do this based on a condition.

  One way could be to have each of the quiz (with their question pool) in separate files, one open the appropriate file quiz by a conditional action that verifies the role. However, be careful with the required option set to "Answer All". There are other means to force the user to answer each question: drag the next button (which is a "Skip" button) under the clear button, turn off the navigation and the playback bar back. In this case, the user will only be able to advance using the Submit button, that answers the question.

• Question pool error in Captivate 8

  We have a project with 5 questions in the question pool and 4 question slides randomly in the film.  When we publish, we get an error saying that we question slides more random than the questions in the pool.  There was a possibility to publish in any case that we did, but now the project stops when it reaches the first random question slide.

  It is a new issue for us and cannot explain why Captivate is to see less of questions that are in the pool.

  The author of project had a question in the pool as a poll and Uncategorized.  Change that seems to solve the problem.

• Question pool - draw for the non-random questions

  Hello

  is there a way to draw question 1 of the pool on a slide, draw question 2 on the next slide and so on?

  Thanks in advance,

  Sophie

  Just a wild guess, but could you open this pool in the project that you want to use in and then copy them to the Question Pool screen in the film?

• Question pool in Captivate 5.5

  I want to create a Pool of about 30 questions where users will only receive 5 questions to answer that will appear randomly.

  I created the question pool. But how only 5 questions available in the pool for users to answer?

  I am using Captivate 5.5.

  Go to insert > Questions and select the random option.  The value of the number 5.  Select your favorite pool question as the location where the questions will come.

• Captivate 5 quiz - random question pool

  I use Captivat 5 quiz with 17 questions in a Question pool to be randomized, if I wan the quiz for showing 10 of the 17 questions randomly, how can be done?  Help, please!

  Hello

  You can add 20 question to your question and then go into ' Quiz > Question Slide > select at random 'Question' and type '10' in the text box.» Select your pool of the Question and it will insert 10 random questions from the question pool you have created.

  Kind regards

  MILIN

• How to edit issues in imported question pools

  I created a review important to question pools and set up the questions randomly long ago. Also a long time I forgot close enough on the Question Pools work.

  Now, I need to go back and modify the questions in question pools, but not to find an easy way to do it. I don't know where the original files are imported.

  I found what I think is a work around, but it is incredibly long. It is to go to Quiz > Question Pool Manager. Then click on an individual issue to bring up the slide. Then close on the pool manager question to edit this slide. Then repeat the process for the next slide that need updates.

  Is there a better way to do it? Help!

  SHE FOUND!

  If anyone needs to know, you go to the window > workspace > Quizzing. Then click on the tab to list the issue on the merits where the timeline is usually. Then you can click the question pool from the drop down and see all the slides.