Questions/problems between 3.2.0.00.27 and database Oracle 9.2.0.1 Apex

Similar Questions

• Question / problems with the TV Toshiba 40TL938 (40TL938F)

  Hello world
  I bought the Toshiba TV 40TL938 french version (40TL938F), in an online store.

  I have a few question / problem and I hope you could help me.
  -When I play subtitles embedded video MKV files via USB, works well, but for me, they are too small, too thin and too white. I can make them biger, more large and with a black shadow around him? If so, how could I do that?
  -When I play MKV via DLNA (with XBMC) video files, there are no subtitles more. Whose fault is this? My TV? XBMC? Do you think, how can I fix?
  -does anyone know if DTS will be supported sooner or later in 2012 toshiba TV models such as my 40TL938

  Thank you very much in advance for your help!
  Backslash
  French user of a beautiful Full HD 3D 40 inch toshiba LED TV :)

  > when I play subtitles embedded video MKV files via USB, works well, but for me, they are too small, too thin and too white. I can make them biger, more large and with a black shadow around him? If so, how could I do that?

  76 user manual page:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF
  You will need to check the option: + Subtitle + type

  > when I play MKV via DLNA (with XBMC) video files, there is no subtitles more. Whose fault is this? My TV? XBMC? Do you think, how can I fix?
  I guess this isn't taken in charge by using DLNA

  > does anyone know if DTS will be supported sooner or later in 2012 toshiba TV models such as my 40TL938
  I have found no information about the DTS :(

• Communication problem between LabView and acquisition of data USB 6259

  I want to monitor a data USB-6259 acquisition using LabVIEW 8.6. However, when you try to create an explicit task (using the DAQ assistant) in order to acquire a signal, I get the message asked supported device found¨. I can see the USB-6259 under ¨Devices and interfaces¨ to the MAX, but when I try to import the configuration data for NOR-DAQmx 8.7.2 in MAX, I get the message ¨Can´t import file configData.nce.  File not found¨. I use NEITHER-DAQmx 8.7.2.  Any suggestions?

  Corneliu

  Hi, Corneliu,

  This question could be generated due to a corruption of database of MAX. Here is a link to restore the database to the MAX.

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9?OpenDocument

  Just follow the steps and let me know if that solves the problem.

  A greeting.

  Jesus.

• I have a question regarding windows mail. I was send and receive mail with no problems until last Thursday. I can still receive mail, but I can not send.

  / * moved from answers Feedback * /.
   
  I have a question regarding windows mail. I was send and receive mail with no problems until last Thursday. I can still receive mail, but I can not send. My email is with bellsouth.net and comes in my computer through windows Messaging.  I spent an hour and a half on the phone with bellsouth, and they say that the problem is with my windows mail.  I tried to use a restore date, and that did not help either. I will post a copy of this message, as I keep getting.  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object 't', counts: 'mail.bellsouth.net', server: 'mail.bellsouth.net', Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC0F thanks for any help.

  Sometimes, WinMail settings get screwed up and you must remove the account and then add it back back.  Make sure first that the antivirus software not interfere (see www.oehelp.com/OETips.aspx#3).   Delete your account completely, then close WinMail.  Then compact and repair the database of WinMail (see www.oehelp.com/WMUtil/).  Add your account to mail back once again, and then make sure you have the correct settings under Tools | Accounts | Mail | Properties | Servers and | Advanced to what AT & T Specifies to WinMail (or OE).  Then see if it works.

  Steve

• "This problem was caused by a compatibility issue between Away Mode your computer system and your 64-bit version of Windows."

  Original title: "hp pavillion needs of troubleshooting"

  Printers and file devices it says my computer needs troubleshooting and this is the message I get after a repair...

  "This problem was caused by a compatibility issue between Away Mode your computer system and your 64-bit version of Windows." The system in the Away Mode is only compatible with 32-bit versions of Windows. This problem is not critical, but you can avoid it again by turning off the system Away Mode in the BIOS of your computer. Refer to the instructions provided with your computer that explain how to access the BIOS and disable the Mode system Away. »

  Where can I find instructions on disabling the system Away Mode?

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above link > 'See support and troubleshooting information' > key in your model number >, read the instructions.

  Or contact HP direct:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot resolve the problem between ASA - CheckPoint (VPN)

  Hi team,

  I have a strange problem with a L2L VPN between an ASA on my side and a checkpoint as her counterpart.

  The IPsec tunnel works very well, but from time to time, the traffic stop through the tunnel.

  Scenario:

  172.31.250.0/28--ASA---Internet---checkpoint---200.122.x.y/32

  I've done many tunnels between ASAs and control points, but this time we found this:

  access extensive list ip 172.31.250.0 outside_1_cryptomap allow 255.255.255.240 host 200.122.164.165

  local ident (addr, mask, prot, port): (172.31.250.0/255.255.255.240/0/0)

  Remote ident (addr, mask, prot, port): (200.122.164.165/255.255.255.255/0/0)

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 1148, #pkts decrypt: 1148, #pkts check: 1148

  local ident (addr, mask, prot, port): (172.31.250.8/255.255.255.248/0/0)

  Remote ident (addr, mask, prot, port): (200.122.164.0/255.255.255.0/0/0)

  #pkts program: 27682, #pkts encrypt: 27683, #pkts digest: 27683

  #pkts decaps: 27683, #pkts decrypt: 27683, #pkts check: 27683

  local ident (addr, mask, prot, port): (172.31.250.8/255.255.255.248/0/0)

  Remote ident (addr, mask, prot, port): (200.122.164.165/255.255.255.255/0/0)

  #pkts program: 3579, #pkts encrypt: 3579, #pkts digest: 3579

  #pkts decaps: 10443, #pkts decrypt: 10443, #pkts check: 10443

  Traffic is defined between 172.31.250.0/28 and a single host, but I see three SAs:

  1 172.31.250.0/28 - 200.122.164.165/32

  2 172.31.250.8/32 - 200.122.164.0/24

  3 172.31.250.8/32 - 200.122.164.165/32

  What is the reason for this?

  The reason why I have paste this above is because the control point defines the traffic "interesting" as two rules (one in each direction).

  Control point:

  Rule 1: The traffic of 200.122.164.165/32 172.31.250.0/28

  Rule 2: The traffic of 172.31.250.0/28 200.122.164.165/32

  So, I think that the problem occurs because we hear by the SAs of the phase 2 bidirectional rules (crypto ACL), and control point sets the SAs of the phase 2 as one-way rules. Even if traffic matches, I see the output above.

  I think this means that the ASA receives a portion of the traffic in a SA and send it via another, and I don't know if that is causing the problem and if so, how to fix?

  The problem is totally random. We have reduced the time to generate a new key for 2 minutes at the minute of the phase 2 and 5 on the phase 1 and there is no problem during the generate a new key.

  We had not been able to capture the log at the exact moment of the problem. Then the tunnel suddenly rises again and start working.

  ASA 5510 version 8.2 (5)

  Any help is appreciated!

  Federico.

  Federico,

  New installation SAs is not so to generate a new key, it consicides with a homologous assuming it matches traffic again and must so initial has ITS new.

  Now when we have a static, selector of this SA traffic encryption card new must match what we defined in the ACL.

  Generally, you will get an error if there is absolutely no match and tunnel would fail to phase 2.

  I want to just make sure we're on the same page. When it ends on a dynamic encryption card, we know (or rarely know) what will look like the SA distance so we accept everything.

  I do not say that this checkpoint of the half was here half it matched. I say it's more likely (for some reason I couldn't be aware, or a bug) implemented match the ACL under static crypto map.

  Marcin

• Problem between CTS/CUBE/VCS

  We have a topology that looks like this:

  CTS-> CUCM-> CUBE-> VCS-> telepresence server.

  CTS-3000 s can make calls to the telepresence server, but the other way for a TC-3000 calls fail, with VCS search history gives a too small "Session Timer" error

  I must point out that demand for CTS-1000 units works very well in both directions.

  On the telepresence server, it seems to connect for a second before dropping.  The TP server logs indicate that the CTS-300 has negotiated OK TIP/SIP-MUX, then it disconnects immediately.

  I read documentationon 'Timer Session small' problem between VCS and CUCM and have made the appropriate changes, however I do not know how having a CUBE in the middle would be afefct this

  CUCM version: 8.6

  VCS: 5.1.1

  TP server: 2.2 (1.48)

  CUBE: IOS 15.1

  Hi Nick,

  I'm the engineer who worked on this through your ticket of TAC.  I know that you now have the fix, but I thought that I have would be the bases here in case others come across this thread with a similar problem.

  In this case, the error "Session Timer too small" came from the CUBE itself.  As you mentioned that you have the VCS and the CUCM set to 500, those who are OK.  However, the CUBE was always the default value of 1800 so he sent this error.  The fix for this is to change this value with the following commands:

  voip phone service

  SIP

  min - to 500-500 expires

  However in the end, wasn't the cause of the failure of the actual call.  Changing the value of the cube fixed 'too small logoff' mistakes, but always calls disconnected right after login.  The fix for this turned out be a CUCM configuration change, which I won't go into here.

• Problem between C40 and Panasonic AW-HE50HE camera

  Hi all

  We have identified a problem between C40 and Panasonic AW-HE50HE camera with HDMI connection.

  The Panasonic camera is configured with the 720 p output, and it can display on a LCD monitor.

  However, we have connected the camera C40 and Panasonic AW-HE50HE with HDMI connection, the C40 show black screen.

  The codec C40 is confirmed as well function and its specification declared support,

  1280 x [email protected]/ * /, 59,94 Hz (720 p 60)

  1280 x [email protected]/ * / Hz (720p50)

  Anyone can provide help for me, thank you,

  Ben Lai

  Hello

  Can you telnet to the codec with the camera connected and check if the codec no video camera and what is the detected resolution.

  Teck Chye

• Problem between field, MUSE, and Typekit

  Expensive Type Kit supports,

  I have an urgent matter:

  I created these sites in adobe MUSE:

  http://Motos.Honda.es/africatwinepictour/ (you must User/pass for access)

  http://www.africatwinepictour.es

  http://Motos.Honda.es/africatwinepictourpt/index.html (I open theseones so you can see that doing/where is the problem)
  

  http://www.africatwinepictour.PT

  Sites in Spanish are works well, but http://www.africatwinepictour.pt and I Don t know where is the problem.

  This site http://Motos.Honda.es/africatwinepictourpt/index.html is exactly the same site as this one http://www.africatwinepictour.pt , but still work doesn´t .pt

  Where would be the problem? The problem is that the customer checks it and need for today...

  Sorry, I know the answer... the area has been redirected incorrectly.

  Concerning

• There is a compatibility problem between 13 and 10 Windows elements?

  Hello

  I've been running 13 items for over a year without any problems. Since upgrading my laptop to window 10, videos of export terribly. I try different video formats, all end up looking the same.

  They make it very well when I work on these items is not a problem. That's why I save and export because I guess they worked, but when I go to open the recorded video, opening up to 10 seconds are jerky, until eventually they smooth and audio/video synchronization.

  This happened to someone else? Is it a problem of Windows, is completely separate?

  Thanking you

  Karen

  According to your description your webcam is in MP4 files to 1920x1080p, my suggestion is that you do the same size output MP4 files.  To publish & share > computer > AVCHD > choose the preset "MP4 H264 1920 x 1080 p XX" where xx is the same rate as your source > has chosen a file name > has chosen a save in > and save.

• A fundamental question/problem with the like undefined array element

  Hello everyone,

  Thanks for looking at my problem. I am very new script and javaScript, and I encountered a strange problem. I always try to solve all my problem myself, with documentation (it helps to learn) or as a last resort with the help of google. But in this case, I'm stuck. I'm sure its something very simple and elementary.

  Here I have a code that simply loads a text file (txt), load the contents of the file in a "var glad." This summary text file a font family name, every name on a new line, as:

  Albertus

  Antenna

  Antique

  Arial

  Arimo

  Front

  Barber1

  Barber2

  Barber3

  Barber4

  Birch

  Blackoak... .etc

  Now I hollow the variable content of loop, extract each letter and add it to the list '[i]' table. If the character is a line break the list [i] table adds another element (i = i + 1); That's how I separate each name in its own element of array.

  The problem I encounter is, when I have hollow loop table fontList and $.writeln (fontList [i]) is the result in the console :

  undefinedAlbertus

  undefinedAntenna

  undefinedAntique

  undefinedArial... etc.

  I don't get serious, where the undefined comes? As far as I tested each digit to be added to the array element, I see nothing extraordinary.

  ----------------------------

  ----------------------------

  Here is my code:

  #target illustrator

  var doc = app.documents.add ();

  Open the file

  var myFile = new File ("c:/ScriptFiles/installedFonts-Families.txt");

  openFile var = myFile.open ("r");

  check if it is open

  if(OpenFile == true) {}

  {$.writeln ("the file has loaded")}

  else {$.writeln ("the file does not load, check the name or the path") ;}}

  load the contents of the file into a variable

  var content = myFile.read ();

  myFile.close ();

  var ch;

  var x = 0;

  var fontList = [];

  for (var i = 0; i < content.length; i ++) {}

  ch = content.charAt (i);

  If ((ch)! == (string.fromCharCode(0)) (10))) {}

  fontList [x] += ch;

  }

  else {}

  x ++;

  }

  }

  for (i = 0; i < fontList.length; i ++) {}

  $.writeln (fontList [i]);

  }

  doc. Close (SaveOptions.DONOTSAVECHANGES);

  -----------------

  -----------------

  Thanks for any help or an explanation. If you have any tips on how to improve my practices or any suspicion, please do not hesitate to say. Thank you

  Hi vladac54380629,

  better, you try something like this:

  #target illustrator
  
  //var doc = app.documents.add(); 
  
  //open file
  var myFile = new File ("c:/ScriptFiles/installedFonts-Families.txt");
  var openFile = myFile.open("r"); 
  
  //check if open
  if(openFile == true){
      $.writeln("The file has loaded")}
  else {$.writeln("The file did not load, check the name or the path");} 
  
  //load the file content into a variable
  var fontList = []; 
  
  var content = myFile.read();
  fontList = content.split ("\n")
  myFile.close(); 
  
  for ( i = 0; i < fontList.length; i++) {
     $.writeln(fontList[i]);
    }
  
  //doc.close (SaveOptions.DONOTSAVECHANGES);
  

  Have fun

  A note:

  The real font names may be different from your own list for example:

  Arial! = ArialMT

  Birch! = BirchStd

  Blackoak! = BlackoakStd

  Concerning

• Problem: connect Dreamweaver CC to a local MySQL database

  Nice day

  I use Dreamweaver CC to create a dynamic site, on a Mac (but I had the same problem when I tried on Windows), with MAMP as a local server Apache with MySQL.

  the main folder of my site is .../htdocs/mysite/ so in the server settings, I set myself as follows:

  

  And this is a job for the live preview.

  BUT

  When I try to connect Dreamweaver to MySQL, it seems that the error:

  

  If you ask, MAMP use 8888 for Apache http and 8889 for mysql. I can change these for 80 and 3306 by default (and write only 'localhost'), but I have the same problem. Infact if dreamweaver did not find a connection message speaks of a 404 error, so I don't think that the problem is on the configuration of the port.

  In another post, I found on the internet about this, someone said that it is a problem between different versions of php or mysql in dreamweaver and MAMP. But I have the same problem on windows with XAMPP.

  Can you help me?

  Thank you!

  This PHP: mysql_pconnect - manual should answer your question.

  In case you do not understand, the said function is not valid for PHP version 7. If you install PHP version 5.4, you won't a problem except on the track when PHP7 becomes public.

• A value between 0.00 18.00 Pixels and pixel is required.  Close value inserted.

  I'm having a problem where the type SIZE is unable to go beyond 18px.

  I tried to enter a value of 21px and the following message out: ' the value ofis between 0.00 18.00 Pixels and pixel is required. "  "More close inserted value."

  I have re-opened photoshop now shift + Option + command to remove settings from photoshop, but no luck.

  I checked the preferences of Photoshop in the software itself and reset dialog box, but still no luck.

  I don't know if the question related to the recent established.

  Anyone who could throw a few lights in this problem is greatly appreciated.

  -Steve

  PS: I use Adobe Photoshop CS6 & MAC OSX 10.9 +.

  

  Hi Trevor,

  I appreciate the help. Turns the problem is with THIS particular file per inch pixels is somehow on a 1 "vs 72".

  Simply, I entered Option-command-i to open the page size dialog box.  Uncheck resampling and replace the PPI 72 ". Checked again, and then click ok.

  That seemed to do the trick.  Thanks for the effort

  -Steve

• Comparison between a static value type String and a type perhaps unrelated number

  Well I have another question of my book of text... so far I typed in exactly how they ask me to and even followed some screenshots of examples of theres. All me looks good, but of course, I'm the only one with an untrained eye.

  When I run this film I get a compiler error of: 1176 20 comparison between a static value type String and a type perhaps unrelated to line number

  Here is my code

  import flash.events.MouseEvent;

  Stop();
  var numberOfCookies:Number = 0;
  startBtn.addEventListener (MouseEvent.CLICK, getCookies);
  function getCookies(event:MouseEvent)
  {
  numberOfCookies = (Math.floor (Math.random () * (10)) + 1);
  var n: Number = 0;
  While (n < numberOfCookies)
  {
  var cookieInstance:cookieMC = new cookieMC;
  addChild (cookieInstance) .x = (Math.random () * 200) + 20, (cookieInstance) there (Math.random () * 150) = + 220;
  n ++ ;
  }
  }
  goBtn.addEventListener (MouseEvent.CLICK, checkNumberTyped);
  function checkNumberTyped(event:MouseEvent)
  {
  If (checkBox.text == numberOfCookies) //this is the line 20
  {
  gotoAndPlay (2);
  }
  on the other
  {
  gotoAndPlay (3);
  }
  }

  The error indicates well enough the problem... the compiler doesn't like to compare different types of things.  In your case, a type is a string, and the other type is a number.  If you need to force one of them to become another type, and you can go either way...

  If (checkBox.text is String (numberOfCookies))

  OR

  If ((checkBox.text) Number is numberOfCookies)

• I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  When I had the same problem, I used the solutions here If you have forgotten the answers to the security of your questions - Apple Support Apple ID