Questions using the 'Make' variables and 'Models' file rename templete

Similar Questions

• Problem/Question about the form Variables and nesting?

  Hello

  I need to create a fairly long list of checkboxes for a user to fill out.  I created a table of database with each checkbox item stored as a line, and using a cfquery I can select in the database and add them to a form as such:

  < do action = "postact.cfm" method = "post" > "

  < cfoutput query = "getquestions" >

  < input type = "checkbox" name = #getquestions.shortname # > #getquestions.longname # < br >

  < / cfoutput >

  < input type = "submit" value = "Submit" >

  < / make >

  The problem is when I try to refer to these items on the next page.

  Instead of naming each one individually, I was hoping to use another query to pull the name of the box and be able to reference it.

  Problem seems to be that I can't refer to them as a variable name, I thought I could do something like this:

  < cfoutput query = "getquestions" >

  #form.shortname #.

  < / cfoutput >

  .. but it does not work because #form.shortname # is not a valid variable.  What I really need, is form #. # getquestions.shortname #, if that makes sense.  Is this possible?  Nesting of a variable inside a variable name name?

  As a demonstration, place the following code in postact.cfm and it will display the name and value of each form field:

  
    
      form.#shortname# = #form[shortname]#
  
    
  
  

  See you soon

  Eddie

• How to open .tif files using the Windows fax and picture viewer

  I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.

  Windows XP SP3 with all updates and IE8.
  Thanks in advance,
  Eric
   
  Original title: how IE8 to open a .tif file by using the Windows fax and picture viewer?

  Hello

  I suggest that allows you to remove any CLSIDS listed under location:

  HKEY_CLASSES_ROOT Type\image/tiff
  
   

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  I hope this helps.

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• creating a view and use the view in a model

  Hi all
  
  I'm new to OBIEE, and I have a requirement that I have two fields to be added to a domain. Because we cannot add queries directly to a model, I have to create a view and then put the request in it, and then use the view in this model.
  I did not understand this well, if someone could help me, explaining in detail the view and adding a query in it?
  
  Thank you
  Gohan

  Hello

  (a) If you want to use your existing DB view please tick box import meta option data - RPD--> file menu
  (b) If you want to create the new view in RPD itself just right click anyof a physical table--> properties--> click the genral--> change the type of array as "Select" then you create/update your sql query, and then click ok that's all
  Once created, you can deploy advice on the database (right mouse button) or you can leave the view cancelled (worst performance).

  Ref steps more to create views
  http://gerardnico.com/wiki/dat/OBIEE/opaque_view
  http://allaboutobiee.blogspot.com/2012/05/OBIEE-11g-deployundeploy-view-in.html

  Thank you
  Deva

• I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  
  

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Using the touch screen and the touch pad at the same time on Windows 8

  How can I use my touchpad and my touchscreen Windows 8? I use Acer and it seems that whenever I get I have TO use the touch screen and my cursor is non-existent. I'm sure there will be a setting I can change to be able to use both at the same time, but so far I can't find answers online or elsewhere.

  Help, please!

  Hello green,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your PC Acer laptop?

  Thank you for your query details.

  I also like the fact that you want to use the touch screen and press the key at the same time.

  Unfortunately, it is not possible. However, you can use touchpad of precision which uses a variety of touch gestures to get around your computer. Touchpad different gestures are provided in this article.
  Reference:
  With the help of a precision touchpad
  http://Windows.Microsoft.com/en-us/Windows-8/touchpad

  You can also make changes to its settings to adjust the duration that your touchpad stays off as you type so that you can avoid accidentally tapping the touchpad with your thumb and move the cursor.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to use the global variable in the table target?

  Hello

  I am trying to load several files into a single interface. the data is loaded successfully. 92. the files are there. for this I used variables and package.

  My requrement is 92 files of data loaded into the target table. I want to know what data from file.

  to this I added a column (filename) to the existing target table.

  If I used joints (not same condition), its totally wrong. all file names are coming.

  Please see the following screenshots.

  

  exit; target table.

  

  in fact in the target table. first 10 lines are coming from file.i.e first _ACCOUNT_LIMIT_511.TXT. but all the files names are coming.

  I'm confuse. After the first data file inserted then insert second data file. in that all file names are coming. Please help me.

  I thought that the global variable is preferable to identify the data came from which file.

  to do this, the global variable is used in the target table. I don't always have my exit.

  Please help me.

  Thanks in advance.

  

  Hello

  You can use the same way, how you use the project variable, just you have to do a thin is #GLOBAL.variable_name for example: #GLOBAL. SMART_AL_FILE_NAME_S

  Note: Make sure you that while you use one variable overall in interface, indicator should be staged as you chose above the screen

  hope this helps you

  Kind regards

  Phanikanth

• Power outage required that I put in place a new user in Vista that I did. Now I can't find the original user and associated files. All files seem to be missing. Help?

  Laptop must have been left on. Last night power Outtage. I went back and put the computer to find guests requiring that I created a user, I did. Now, I can't find the original user and all files seem to have disappeared.  Have Vista

  Hello

  1. don't you make changes on the computer before this problem?
  2. do you remember the exact and complete message on this line?

  Check if you can find the user original files of accounts in the following path:
  C:\Users\[user account name]

  The article could be useful to you.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Every time using the ', it displays "and «»

  original title: why is my ' button always keep changing?

  A simple problem I guess, but as a writer, it is very annoying.  Whenever I'm trying to use the ', it displays "and" "when I hold down the SHIFT key.  I have to delete the extra apostrophe to an apostrophe.  How can I change, so it's a single apostrophe instead of quotes at all times.  I played with the language toolbar and every time I spend in the US instead of US International, it fixes the problem... only temporarily.  How can I make it permanent?  Thanks for the help in advance.

  Hi Spundae,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like a character is typed when you use a single apostrophe.

  I have a link that should guide you in the right direction.

  Visit the link and indicate "the keys do not collide correctly" and "the wrong characters are typed.

  http://support.Microsoft.com/kb/258826

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• How do I use the letters A and O in Dreamweaver?

  I wonder if there is any way I can use the letters A and o Dreamweaver transforms the letters some random mess. They are used in my mother tongue and so far I have not been able to use. I can't also set with change the language of Dreamweaver on my own since it was translated to it. Are they fixed if I download my files on the net? If this is not the case, what I have to do to fix this?

  Yes, you can use the accented characters in Dreamweaver, as long as you use a fairly recent version of Dreamweaver. Make sure that the document encoding is set to UTF - 8. If you can type accented directly from your keyboard characters, Dreamweaver inserts the characters directly.

  What you describe as back "some random mess" at the time where the browsers are not able to handle accented characters. Ä is the character entity HTML a. Older versions of Dreamweaver by default to Western European (iso-8859-1 encoding), which translates accented characters in the process of conversion to HTML character entities.

• How to swap two values without using the third variable using the procedure

  How to exchange the two values without using the third variable using the procedure?
  
  In a procedure using two mode we pass two values A = x and B = y, and let us pass parameters to receive the output has A = y and B = x without using the third variable
  
  Published by: Millar on August 19, 2012 11:23

  Your question doesn't seem wise. As written, there is no reason to a third variable, just

  CREATE OR REPLACE PROCEDURE(
    x IN number,
    y IN number,
    a OUT number,
    b OUT number
  )
  AS
  BEGIN
    a := y;
    b := x;
  END;
  

  If it's an interview question, I suspect that the intention was that you had two settings IN OUT and you wanted to swap the values without the help of a third variable.

  Justin

• Query on the physical Architecture, the logical Architecture and model

  Hi Experts,
  I have a confusion regarding the physical, logical and model Architecture Architecture. Please tell me what type of information or data, these three above hold.
  Thank you

  Physical architecture contains information about the physical configuration of your environment e.g. nameservers, jdbc, usernames, passwords etc connection strings

  The logical architecture provides an abstraction layer that allows to group by similar contexts of physical architecture components that reside in different locations/environments.

  Patterns are reversed representations of objects in your physical architecture that is tables, flat files, etc. The models are used as sources and targets in your UI design

• Alignment of columns of a table using the control variable

  Hi I'm new to Javascript, using only Applescript before.

  I use Indesign 5.5 on Mac and I learn Javascript by adapting old Applescripts I have used for years.

  So, with an existing table, one of the things I want to do is to put alignments in the columns by using a variable. Here's what I've tried so far:

  function setColumnWidthsAndAlignments()
  {
      var myWidths=[29, 23, 13, 13, 13, 13];
      var myAlignments=["leftAlign","leftAlign","centerAlign","centerAlign","rightAlign","rightAlign"];
      var numberOfColumns=myTable.columns.count();
      for (c=0;c<numberOfColumns;c++)
      {
          myTable.columns[c].width=myWidths[c];
          myTable.columns[c].cells.everyItem().texts.everyItem().justification=Justification.myAlignments[c];
      }
  }
  
  

  but I get an error

  -Object does not support the property or method 'myAlignments '.

  If I throw the myAlignments variable and just put for example leftAlign, it works, then maybe I'm not declares the variable correctly?

  I know that I could add a few extra paragraph styles and cell styles and style of the table like that, but I it would be a good learning exercise (more of which I want to limit the number of paragraph in document styles - there enough already!)

  If anyone is really interested, I would like to place the script here and would like to really comment on how the structure could be improved or optimized or simply to tell me if I'm heading in the right direction.

  Thank you and best regards,

  Malcolm

  //Simple table script 1
  
  
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll; //make sure that user interactivity is switched on ????  why????
  
  
  if(checkForOpenDocs()) //checks to see if there are any open Indesign documents
      {
          if(targetMyTable()) //checks to see if the selection is inside a table - if not, gives an error dialog - if it is, returns variable myTable which can be used to target different parts of the table
              {
                 // selectLastRow();
                  //resetTable();
                  //applyTableTextParaStyle();
                  //removeRules();
                  //applyAlternatingFills();
                  setColumnWidthsAndAlignments();
                  //setRowHeightsAndInsets();
                  
                  
      }
  }
  
  
  function checkForOpenDocs()
  {
      if (app.documents.length!=0)   //there is at least one document open
      {
          myDocument = app.documents.item(0);    //get the id of the frontmost document - might be useful?
          return true;
      }   
      else
      {
          alert("There are no documents open");
          return false;
       }
   }
  
  
  function targetMyTable() //no matter what is selected in the table, change selection to be whole table
  {
      if(app.selection[0]==null) //if there is nothing selected
      {
          alert("There is nothing selected.");
          return false
      }
      var mySelection = app.selection[0];
      
      switch(mySelection.constructor.name)
      {
                                          //When a row, a column, or a range of cells is 
                                          //selected, the type returned is always "Cell"
          case "Cell":
          myTable=mySelection.parent;
          return true
          break;
  
          case "Table":
          myTable=mySelection;
          return true
          break;
  
  
          case "InsertionPoint":
          case "Character":
          case "Word":
          case "TextStyleRange":
          case "Line":
          case "Paragraph":
          case "TextColumn":
          case "Text":
          if(app.selection[0].parent.constructor.name == "Cell")
          {
              myTable=mySelection.parent.parent;
              return true
          }
          else
          {
              alert("The selection is not inside a table."); 
              return false
          }
          break;
  
  
          case "Rectangle":
          case "Oval":
          case "Polygon":
          case "GraphicLine":
          case "TextFrame":
          if(app.selection[0].parent.parent.constructor.name == "Cell")
          {
              myTable=mySelection.parent.parent.parent;
              return true
          }
          else
          {
              alert("The selection is not inside a table."); 
              return false
          }
          break;
  
  
          case "Image":
          case "PDF":
          case "EPS":
          if(app.selection[0].parent.parent.parent.constructor.name == "Cell")
          {
              myTable=mySelection.parent.parent.parent.parent;
              return true
          }
          else
          {
              alert("The selection is not inside a table."); 
              return false
          }
          break;
          
          default:
          break;
      }
  }
  
  
  
  function resetTable()
  {
      myTable.cells.everyItem().clearCellStyleOverrides (true);   
  }
  
  
  function selectLastRow()
      {
      //myTable.cells.itemByRange(0,-1).select();
      myTable.rows.itemByRange(-1,-1).select();
      }
  
  
  function applyTableTextParaStyle()
  {
      myParagraphStyle=myDocument.paragraphStyles.item("•table text");
      myTable.cells.everyItem().texts.everyItem().appliedParagraphStyle = myParagraphStyle;
  }
  
  
  function removeRules()
  {
      myTable.cells.everyItem().topEdgeStrokeWeight=0;
      myTable.cells.everyItem().bottomEdgeStrokeWeight=0;
      myTable.cells.everyItem().leftEdgeStrokeWeight=0;
      myTable.cells.everyItem().rightEdgeStrokeWeight=0;
  }
  
  
  function applyAlternatingFills()
  {
      myColor=myDocument.swatches.item("Black");
      myTable.alternatingFills=AlternatingFillsTypes.alternatingRows;
      myTable.startRowFillColor=myColor;
      myTable.startRowFillTint=20;
      myTable.endRowFillColor=myColor;
      myTable.endRowFillTint = 0;
  }
  
  
  function setColumnWidthsAndAlignments()
  {
      var myWidths=[29, 23, 13, 13, 13, 13];
      var myAlignments=["leftAlign","leftAlign","centerAlign","centerAlign","rightAlign","rightAlign"];
      var numberOfColumns=myTable.columns.count();
      for (c=0;c<numberOfColumns;c++)
      {
          myTable.columns[c].width=myWidths[c];
          myTable.columns[c].cells.everyItem().texts.everyItem().justification=Justification.myAlignments[c];
      }
  }
  
  
  function setRowHeightsAndInsets()
  {
      myTable.rows.everyItem().minimumHeight=1.058;
      myInset=0.5;
      myTable.rows.everyItem().topInset=myInset;
      myTable.rows.everyItem().bottomInset=myInset;
  }
  
  

  Hello

  Welcome

  myAlignments should be properties, not strings. have not read the second part of your post...

  myTable = app.activeDocument.stories[0].tables[0];
  setColumnWidthsAndAlignments(myTable)
  
  function setColumnWidthsAndAlignments(tableObj)
  {
      var myWidths=[29, 23, 13, 13, 13, 13];
      var myAlignments=[Justification.LEFT_ALIGN,Justification.LEFT_ALIGN,Justification.CENTER_ALIGN,Justification.CENTER_ALIGN,Justification.RIGHT_ALIGN,Justification.RIGHT_ALIGN];
      var numberOfColumns=tableObj.columns.count();
      for (c=0;c