questions using VCBmounter to back up a windows 2008 VM

Similar Questions

• Windows 2008 - what happens if it does not activate in the grace period?

  Hello

  I know it is a forum for Vista but everything on the web seems to tell me that way...

  In our Organization, we plan on using KMS for activation of our Windows 2008 servers (we have only 2 of them at the moment). However what I read you need at least 5 physical servers Windows 2008 (not the Virtual Machines) before they will start to activate.

  My question is: what will happen to the Windows 2008 servers if they do not activate the grace period?

  From what I can tell they should keep normal operation (reduced functionality Mode has apparently been removed from Windows 2008) but will be many notifications to activate me now whenever you log on to the server.

  Thanks for your help.

  http://www.Microsoft.com/windowsserver2008/en/us/product-activation.aspx

  Read the MS link above. Mick Murphy

• Windows 2008 Server R2 Std - issue of Best Practice Analyzer

  Windows 2008 Server R2 Std - question BPA
  I built a new Windows 2008 R2 Standard Server and configured as a domain controller. When you run the BPA I get the following error, which I can not solve:

  Question:
  The default domain controllers policy is not in force on the OR OR = Domain Controllers, DC = WRIGHT.
  Impact:
  If the Group Policy settings that are defined in the default domain controllers policy are not applied to domain controllers, Active Directory operations may fail.
  Resolution:
  Link the default domain controllers policy to the ORGANIZATION OR unit = Domain Controllers, DC = WRIGHT

  The default domain controllers policy is linked to the domain controllers OU. I dun dcdiag and the only failure is NCSecDesc but I don't plan to add an RODC to the forest. When I run the resulting strategy game I can see domain controller policy has been applied.
  Is there something I can do to clear this error message?

  Hello Lynn Furlong,

  Microsoft Communities is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Your question deals with Windows 2008 Server R2, it would be better to post your question in the forums TechNet for ITPros.
  Click on the link here to transfer your question in the Forum Windows Server 2008 Group Policy. They will be better able to meet your group policy do not apply to domain controllers.

  Sincerely,

  Marilyn

• All possible means for the conversion of P2V Windows 2008 R2 (even with workaround solutions?)

  We have several production servers, that we have recently upgraded to Windows 2008 R2, only to discover after the fact that VMWare Converter currently does not support convert a physical machine to a VMWare image. The servers are actually images of Hyper-V, but since there is no way to convert the computer virtual Hyper-V to VMWare, we have always used the P2V conversion with our Windows 2008 Server (not R2) without problem.

  Its imperative that we find a way to do this and I was hoping to see if anyone has found any workaround for this problem.

  We would prefer not to have to buy another product for that (i.e. using Acronis or Symantec Backup), as one would expect VMWare to support it eventually (even if it is the only option, we will have to examine it). We simply need a workaround solution for us until they do.

  Thanks a bunch!

  Hello.

  Have you tried the StarWind V2V Converterfree?

  Good luck!

• vCenter on Windows 2008 Server Core?

  I have searched all over the Internet (especially the VMware site), but couldn't find a yes/no answer to this question:

  Is vCenter installation on a Windows 2008 Server Core?

  And if not, why it wouldn't work?

  Thanks for your comments - I have faith that by the wealth of experience available on this forum, I will finally have my answer...

  as of today, Windows 2008 is not a host to vCenter operating system.

  http://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_compat_matrix.PDF

• DNS server error that always brings back us to windows update erros trying to get on the internet

  Vista - hate him. I spent hours on the phone with a brand new computer that Toshiba with Vista 64-bit Edition Internet will stop working with the DNS server unknownerror. Sometimes reboot help but with all Windows update he internet is a luxury. Internet connection is perfect, perfect bc other laptops in the House with no problem, router, no viruses etc., computer - fine tooth - comb nothing.

  Take each OFF download windows update and work until updates again and then started barking at me, something is missing like its updates! Can't very well what update is screwing the connection or networking or a framework-Silverlight is always suspcious to me also.

  My icon for internet splits in two and shows as a #2 without asking confirmation except for a mysterious update. Access: Local and Internet. Symbol of the Internet will be turned off and will not ever look like disconnected until you try to connect.

  That's why people are going to Apple. Windows will not help or is somewhere secret and accept just your visa and mastercard and so what still you? Vista I can't update and no security.

  Toshiba is not very user-friendly, that is toward the back, they discovered Windows was the question. Isn't our problem, said - even if we're stuck with Vista with their product!

  I'd love to hear if someone has SIMILAR problems or if anything that I did not have tried! Thank you very much.

  Signed. Never buy new windows - toshiba on my list too.

  Hi begodsbutterfly,

  Welcome to the forum of answers windows vista.

  We are sorry for the inconvenience that you had to go through. I have some steps you can try to solve this problem.

  Try to check in SafeMode with Networking if the same problem occurs. To start in safe mode with network, restart your computer and press the F8 key for about four to five times. You will see the window options of safe mode with network in rated advanced. Use the arrows on your keyboard to select Safe mode, and then press ENTER.

  Please check if you get the error in safe mode with network.

  You can also try a system restore to the date when the computer was working fine.

  To do a system restore, please follow the steps below:

  1. click on start to reduce this includes this image, type systempropertiesprotection in the Search box and press ENTER.

  Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  2. in the System Properties dialog box, on the System Protection tab, click System Restore.

  3. in the System Restore dialog box, select choose a different restore point, and then click Next

  4. Select the restore point that you want to use, and then click Next.

  5 confirm your restore point and then click Finish System Restore restores the selected Windows Vista configuration and then restarts the computer.

  6 log in the computer. When the restoration of the system of confirmation page appears, click on OK.

  The system restore article is:

  http://support.Microsoft.com/kb/322756

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• When I used another key to activate the windows, what the key embedded on the motherboard.

  I bought a desktop lenovo Lenovo online - usa around 15/02/2015. the machine came with windows 7 pro. installed through windows downgrade rights 8 pro.

  but perhaps, I do not open/use the machine until 30/03/2015. After that, I have updated the system by installing updates provided/offered by windows updates.

  around 04/03/2015, when I open the computer properties, down to the title of the windows activation, there was this message "remaning 2 days to activate windows.» Activate now»

  When I click on activate now. Another dialogue box opens, indicating that the product key entered by me is not valid.

  I called mirosoft support, but perhaps, they refused to help me because I don't have the product key. (as long as no key is provided to me by lenovo, but only 8 pro windows recovery media.)

  I called lenovo support, but perhaps they also did not help me, according to them, it was a software problem, that only microsoft could solve.

  now, I had another death system (samsung) with windows 7 pro, so I used this product key to activate my windows on lenovo.

  My quiries are:

  1. what happens if God for bid, I want to restore my system to its factory state using the recovery partition or recovery media created by me, using backup and restore of lenovo.

  1. What is the status of my windows?

  1 b. Will he ask again the activation key?

  2. as I have downgrade rights to windows 8 pro, it is said that the product key is built-in on the motherboard. now when I used another key to activate the windows, what the key embedded on the motherboard.

  3. What is the best possible solution to this question, while I keep the original oem windows?

  is not - and never has been - responsibility of MS to pre-installed Windows help, a large part of the price of Windows is the support costs. Manufacturer have always had the responsibility to provide software support for the warranty period. Most interprets this as giving instructions on how to use the recovery media :(

  Yes, by using the recovery media should give your system its true status.  It will delete all data and programs, so go back to external media first!

• I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Hello

  I have 2 laptops Toshiba, Qosmio X 300 - 14U and Satellite T130 - 12 K, and my question is:
  I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Thanks in advance

  Hi frakri,

  What drivers tell you exactly? Display, chipset, sound, etc. ?

  Theoretically, it should be possible, but it s according to the material. For example if your Qosmio has the same chipset as satellite you can use these drivers. Otherwise it wouldn't work because the hardware is different.
  First, check the features!

  In addition, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Cannot print from Internet Explorer 11 using HP LaserJet 200 color on Windows 7

  Who would be able to help me?

  When I want to print using Internet Explorer 11 on a Windows 7 PC, I can select Preview before printing, but when I actually want to print, it gives the error:

  "There was an internal error and Internet Explorer is unable to print this document."

  This error only occurs when the 200 HP LaserJet color is selected.

  I am able to print on our other HP printers, like the HP Color LaserJet CM4540 multifunction printers.

  I am also able to print on a printer using Chrome.

  If the problem seems to be related to Internet Explorer 11 in combination with 200 HP LaserJet color.

  I tried the 'standard' measures to resolve the issue, such as:

  1. disable Internet Explorer Protected Mode

  2. the value Internet Explorer default browser

  3 re-create the missing bass folder and define the level of integrity

  4. start Internet Explorer as an administrator

  This does not resolve the issue.

  Please notify. Thanks in advance.

  It is a problem with IE 11 on Windows 7 systems with no fix yet against MS.

  The following thread has had a problem like yours:

  http://h30434.www3.HP.com/T5/other-printing-questions/printing-stopped-working-in-IE11/TD-p/3549605

• Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Hi George,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope that helps!

• Anyone know if its possible to install Windows thin PC on a Mac and use it as a thin client Windows?

  Anyone know if its possible to install windows thin PC on a Mac and use it as a client lightweight windows? I know you must have a license for the ASO install Win TPC for free but you can purchase the license to install it on products that do not have currently a copy of Windows to this topic. Web only if its possible to do it on a Mac. Thanks in advance.

  original title: windows thin pc on Mac

  Hello Stephen Safranek,

  The question you posted would be better suited on the TechNet support forum. I suggest you to post the question on the link:

  http://social.technet.Microsoft.com/forums/en-us/newThread?Forum=MDT

• How can I identify the date when the last system restore was used to roll back the pc?

  Original title: how System Restore last used

  As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?

  I can remove all restore points. I've used twice now the beta off Defender & he assures me
  the pc is clean Virgin.

  I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)

  I now seem to have acquired Windows Powershell along the way, gawd knows where!

  He was not here a few days ago and I don't have any idea where it is!

  What is it and should I be worried?

  Thank you

  Hello

  You can check this link:

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  The following versions of Microsoft Outlook are fully supported on Windows 7;

  • Outlook 2003
  • Outlook 2007
  • Outlook 2010 (when it came out)

  It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.

  Previous versions
  Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;

  • Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
  • Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.

  The info source:
  http://www.MSOutlook.info/question/303

  t-4-2

• "Aero Peek" selects windows on top, but after a second selected window is coming back, behind other windows. __

  When I use Aero Peek and select 1 window to bring it over the top, he goes there, but after a second, he goes back and hides. Sometimes it is on top a little longer, sometimes it's on the top of page continuous, but especially it goes back bihind other windows. If, during the selection, I press the right button of pouts and use 'move' for selected window-, it helps. This problem mostly appears when I try to select the window which is not maximasied, while the other window/s are maximased.

  I use Windows 7 proffessional with 2 monitors.

  All solutions?

  Concerning

  Jerzy

  Here is an article on how to fix problems with Aero Peek in Windows 7: http://support.microsoft.com/kb/976170.

  If this does not help, please repost in the Windows7 forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Any solution to use the same IP configured on Windows 7 to Windows XP Mode.

  Hello

  Currently I have the Installer Windows XP mode on Windows 7. The environment requires static IP address within the specific range (eg. 192.168.6.xxx) to download documents from the repository (server). But because of the limitation on the static IP address, is there a work around where XP Mode can use the primary IP configured on Windows 7? Please specify.

  Best regards

  Verhasselt

  (moved from XP)

  Hello Vasanth,

  Thanks for posting your query in Microsoft Community. I apologize for the late response. The question you have posted here would be better suited in the TechNet forum. You can use the link below to post here.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.