Questions WRT120N

Similar Questions

• Can satellite A500-17 X - I get full speed with router Linksys WRT120N WLan?

  I want to buy a "Linksys WRT120N" for my A500 - 17 X wireless router, and my question is can I get full speed with this router as 100 Mbps or more.
  I don't have as much knowledge on wireless routers and that is why I ask.

  And the other question is:
  This router will give me good signal in my apartment of 60 m 2 from one room to another?

  Hello

  I think your question should be posted in the forum of the manufacturer of the router and not here in the forum of Toshiba.

  Anyway. It seems that the Wlan WRT120N router is certified for
  IEEE 802.3, IEEE 802.3u, IEEE 802. 11 b, IEEE 802. 11 g, Wi - Fi CERTIFIED, IEEE 802.11n (draft 2.0)

  As you can see the supported WiFi standards: 802.11 B, G and N

  For your laptop s Wlan card supports Draft N, you should be able to connect to 802.11 N.

• Just don't reset WRT120N

  I'm seriously starting to hurt in the head. Urgh. Sorry if this question was asked before. I searched for a few hours now.

  I'm trying to get this router to its original shape (pass: admin (?)) but the "hold for 45 seconds reset button and unplug for 30 seconds" just doesn't seem to work. When I try to install with the CD it just repeat myself that I have to reset it.

  In short, how do reset you the WRT120N? Are lights assume to blink to indicate that you are is to take the bottom of reset?

  Thank you.

  Make sure the router is powered. Then press + hold the reset button of your router for 30secs first. (Reset is located on the back panle to your router, you must use a pen or a paper clip to push the button) Because if the flashing power light which indicates that the router is reset and then powercycle the router to only 30secs.

  If the power LED flashing press + hold the Reset button for 1 min, then Powercycle the router for 1 min. Then, check the IP address of your PC and then try to access UI (192.168.1.1) your router and use admin as password.

  Another thing to be safe make sure you don't have any active firewall if you have to access the user interface of the router.

• WRT120N Wireless laptop connected to the router, but does not connect to internet

  I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

  If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

  I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

• How to set up WRT120N

  Hello. I have the following problem. I use a static IP address and I use router wrt120n, but to connect to the internet, I plugged the internet cable in the 1,2,3,4 (any) slot. So now I use the part wireless router without "shaping" if I can afford. When I put the internet cable into the slot in the Internet from the router, the laptop can simply connect to the internet - it shows an unidentified without access to the Internet network. I don't know what kind of changes I need to make in the WEB interface of the router. I think I set the type of the connection - now is DHCP and may be putting my IP address, DNS, SubnetMask in the router configuration, but do not know exactly how. I tried to configure the router with the CD interface but it's same - network not identified when the cable is plugged into the port (yellow) Internet. How to configure the router to a router, and not only a wireless switch?

  Looks like the question is weird. If you connect directly to the modem, you can access the internet?

  On the Device Manager, click view on the top. Select to see the hidden device. That should show you something, here.

• WRT120N mobile phone and pc

  Hello, I have the following problem/question. I have W without WRT120N router and I use it for the WIFI connection for your laptop. My internet provider has limited life and I can't share internet between multiple computers. But I wonder if I can set up there a way to use the net Wireless from my mobile phone (nokia). The gsm based my WIFI but cannot connect and which is may be because life is limited. I connected the lan cable in one of the ports 1,2,3,4, not on the Internet port and I think that I now use the router as a switch. I can do something to configure the router so I can use the internet in my phone, too. I have nothing against if I have to unplug the pc to use internet from my phone. I just connect my phone on the net. I use an IP address, I mean that it has failed to obtain an IP address automatically. Ideas then?

  Simply because they have their own profile when you first connected to them. So whenever you try to sign in again, you will not too much problem. If you have changed the settings for your router, you need to remove the profile wireless on your phone before plugging in. Check your manual on how to do it.

  Let's try some troubleshooting on the router.
  Check this procedure. Do not configure PPPoE. Select static IP address in the Internet configuration then key - in the IP address assigned to you. Here is the procedure. On the basic settings tab, go to the Advanced Routing tab, select gateway instead of router.

  The provider of wireless Internet, post the IP address is assigned to your computer, connect your laptop.
  Same procedure, connect your computer to the router, after the INVESTIGATION period. Here is the procedure.

• NAT on the router WRT120N.

  Hello

  I buyed a new router the WRT120N and it works well

  But I have a question I had this problem on my other router also but it was easy to stop this it is called NAT, I have problems with it on a game called Gunz.

  7700-7800 TCP and UDP ports.

  I already found the option turn off NAT, but then I have no more Internet if disable this I have to write anything, because he wants to STATIC ROUTING.

  I tried portforwarding wich only helped on my old router, but it does not help.

  Eny one tell me what I must write in the stuff of static route? I don't know enough about routers, but this?

  Thank you

  Niels

  I guess that the 168.192.1.104 in the port forwarding is a typo.

  The computer is configured for DHCP. You must ensure that you configure a DHCP reservation for the computer.

  Your router is connected directly to the internet. It has a public IP address. Good.

  Haven't you set up redirects to single port or port triggering?

  If this isn't the case, the transmission seems to be set up correctly.

  Do you run the firewall on the computer?

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• Questions - and answers forgotten

  How to get my 'secret' answers to the questions that I have noted the way back when?

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Question of cloning for SSD upgrade on 12 Macbook Pro

  Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

  Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

  My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

  Thank you.

  Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

• Question about resolution movie downloads

  If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

  Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

  Any help is appreciated!

  THX!

  Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

  With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

• Why I can't ask questions.

  I just have a question.  I said that I can't ask questions.

  Do exactly what you did to make this post, but your question in there instead.

• Cannot reset the Security Questions

  Hello my dear

  -J' forgot my account security questions, but I remember password

  And I'm changing my Security Questions, but show me this sentence

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  -I want to solve this problem as soon as possible if permitted

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145081)

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.