Queues advanced Vs normal queues?

Similar Questions

• Photosmart 7520: Paper and possibility of selection of quality always change to the photo paper

  I'm unable to select different types of paper and print quality.
  whenever I choose another paper automatically return to advance and normal quality hp photo paper.
  If for example I change quality printing at best on plain paper automatically become Hp advanced photo paper.

  Any help please? I am very frustrated

  Hey @antonello2,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing to your Windows 7 PC to your 7520 Photosmart e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If the printer is connected to your PC via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on start and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a new queue for your printer.

  Please let me know if this allows you to change the paper settings. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• GarageBand: How a song template?

  IPad2 with Alesis iOMIX GarageBand 4-channel recorder.

  I want to reproduce the new configurations of the song without selecting my preferences each time. For example, I record in automatic bars since the length of the record is not know in advance. Normally there is the MIC 4 and this would be much faster to click on a predetermined preset. The main room is sermons, Church choirs and soloists.

  I just realized that all it takes is to reproduce a song, which is install the you want, repeatedly and use the copies you need. too easy.

• HP envy 14 investigation of recovery disk

  Hello. My Hp envy 14 came with the first elements adobe suite and I was wondering if I use the dvd system recovery and the recovery of a dvd to a restoration application full of preforms will I still have the Adobe came with my laptop?

  Thank you in advance =]

  Normally, HP Recovery reinstalls Windows and all original & drivers - software with the exception of the Office (trial version) that comes on most of the HP machines.

• Rio's issue fixed

  Just a general question about gaps in my knowledge. We used a fixed point in the Rio, which is fine. If I do some basic math, say the multiplication of two numbers in the format 20,4 IE integer size 4 and 16 bits after the decimal point and then I get a number of 40.8. Should I re - convert this back to 20.4 or can I leave it and just continue. LabVIEW will make space for all the variable solutions or should I do it manually? I can see if I'm doing a lot of multiplies and adds the numbers get bigger and bigger.

  Also, I saw an article where the programmer made the move to the right and chipping itself but the fxp block for me? for example I multiply two 8.4 numbers and get a 16.8 who do I shift to the right and re-scale. What is recommended for the addition, division, and multiplication.

  Thank you

  I don't know what you're asking here.  What do you mean by, "LabVIEW Will make way for all the different solutions?"  By providing the result as a value of 40.8, LabVIEW is to ensure that there is enough space for any results.  You can continue with this value, but afterwards, you should it retract.  With number requires more bits more FPGA resources, and there is a maximum number of bits that can be used to store a value.  It is up to you to know how you want to handle this scaling.  Sometimes, it is more important to preserve the most significant bits and lose resolution.  In other cases, you can know in advance the normal range of entries and can accept the overflow for unusual entries in order to maintain the resolution for typical values.  There is no specific best practice.  See warnings and recommendations for the use of fixed point numbers and.

• Not able to take backup on external drive.

  Original title: backup and backup Open files;

  I have just startde to use Office 2007 with Windows XP Pro. I'm doing a backup on my external drive "F". When I try to open the file or folder of this drive in R / clicking > open, it brings back me to the wizard to backup & restore instead. The window that opens when I R / click on the file/folder on drive F is so different; It shows a selection "Edit" at the top, followed by "Open", followed by "7-Zip", 'open with' ' Scan with "," send to "etc. No "Explore". I was unable to open the folder or file in any given method. Make the backup I use the Backup Wizard and have used the advanced, and normal method. On the F drive backup icon appears, but it seems to be empty or such. What I do wqrong? I need your HELP, please and thank you: HDScala

  Hi JoelJ1964,

  Thank you very much for your help. Before using this laptop, I used my old computer with WIN XP Pro and Office 2003. I was able to back up to the external hard drive F and then open and work with files or files, as in copy and paste to the C drive everything I need. Office 2007 does not work the same? I use Windows XP pro here as well. In addition, I seem to have several folders "My Documents" on "My Computer" tree. A top under the desk, then 'User' in Documents and Settings, I 'My Documents' and 'recent Documents '. In the latter folder, I found all the backups, many icons, real backup folder containing only 1 KB, and most appear to be shortcuts. I simply do not know what is happening here, although some files or folders are containing the info that I have previously saved in My Documents.

  How can I know what a folder, when I returned to the Backup Wizard, follow the instructions in the wizard and the file or restore the right folder? I'll be able to see this only restored?

  Any suggestions or help or advise would be appreciated. Best regards, HDScala;

  Hi HDScala;

  With all due respect, you're wrong to be able to open and edit files after using backup windows on your other computer. Using the backup utility is not the same as copy and paste. When you use backup image is created similar to the image below. When you use copy / paste, you are able to access immediately, open and edit the file. Backup doesn't work the same way. It compresses the files you selected to save then creates an image of the same thing. There is no option to change the format that uses the backup utility files.

  http://img24.imageshack.us/img24/9417/backupimage.jpg

  The link below is a tutorial on windos xp backup utility.

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/bott_03july14.mspx

  As for the several folders "My documents" you see, there's such a folder for each user account on the computer, including the default Administrator account. These records are quite normal.

  The only strange thing, that you have pointed out the fact that you see the individual files in recent Documents. You should see the image created by the backup utility along with the documents you accessed physically.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• red circle on the signal on an ACER LIQUID PHONE 380 bar indicator

  I have a phone 380 liquid on the bar signal indicator, this is what looks like a small red circle, no signal is received.

  When I go into settings what are there for example data mobile networks activated in roaming, network mode tabs are not underlined which meant that they cannot be selected.

  No idea what this could be and this is why I get no signal? Thanks in advance

  Normally 3 works on their 3G networks, if you don't have 3 network coverage, they go to homelessness 2G, so if you have disabled the roaming you will receive notification of the network missing.

• Swipe Z30 unwanted blackBerry

  Hi all

  I noticed a strange behaviour of my Z30: when he's asleep if I drag successively in the middle of the screen to the top, above the middle third of the screen (and not from the bottom), the Z30 wakes up as if I had pressed the button up at the top.

  It amuses me because these little successive shots seem to happen in my pants pocket.

  And when he is awake, random touch of the screen cause any type of application to start.

  Has anyone noticed that too? I bought a BB cursed?

  Thanks in advance

  Normally a shot of to halfway to the top of the screen should do nothing, but apparently, you get an action. I can recommend how to turn off all THE scans to wake up your phone. From your home screen, drag down and select settings > display then go to wake up suddenly and it switches to the off position. Now if you want to reactivate your phone, you have to press the power button on the top; any shot on the screen won't do anything to wake up your phone.

  I hope that helps you.

• BlackBerry Smartphones assign a ringtone

  Is it possible to assign a specific ringtone when I receive a message "PIN"?

  If you want to assign a specific ringtone to Blackberry Messenger, yes you can, go to profiles, scrool up to advanced, click normal or one who is active and you have applications, go to Blackberry messenger and change the ringtone.

• BlackBerry Smartphones SMS text MESSAGE

  Hello, this is the sound of text message sms

  When you receive a text, his blackberry or the ring goes out. Is their any way to change this so that I can put a different sound on it of mine?

  Yes, of course, go to the profiles icon, click the icon, scroll down to advanced, click normal or one who is active, go to sms text and change the sound.

  Thank you

• HP Pavilion g6 caplock continues to blink on and it is continuous.

  laptopn starts fine everything works fine but it flashes and other key flashes.

  4 GB of ram

  AMD radeon hd 7670 graphics card m 1 GB

  processor i3

  Thanks in advance

  normally when the g6 is flashing make sure light plugs, it is diagnosed and this model also experienced vulnerabilities check the fan blows cold air and hot no air inlet is at the top left a site. If the laptop is still under warranty get it checked that I recently had some of the g6 in repairs. I got advise customers that it is a known flaw on the model of hp Pavilion others are dv9 to dv5 dv6 among other pavilion series had been a major pain and suffers from breakdowns of card mother of gpu failures and problems of heat

• HR 11 printed Documentation: how to reduce the gaps/spacing between topics

  Hello to everyone in RoboLand,

  
  

  I use 11 HR and 2013 of Word on a Windows 7 computer.

  I need help to find a way to close the gap between help topics that are generated (printed material) HR (using a Word template). Please see the example (image) below, as well as my image below Styles settings.

  
  

  Thank you

  ~ H
  

  

  In Word, attempts that have failed are as follows:

  -Keep all lines (power switch)

  -Keep with next (power switch)

  NumberList setting 11 HR Styles - in form/multilevel list

  1. Level 1 Style: paragraph Style: white, list Style: decimal 1 2 3, change the Style: < x >, police: Arial 10 PT.

  a. level 2 Style: paragraph Style: blank, list-Style: Lower-alpha a, b and c, change the Style: < x >, police: Arial/10pt

  
  

  Word FlexiNumberList template styles - list formatting form/multilevel

  1. " 1 position number: number of alignment: left aligned: 0.15", removal of text to: 0.3 "

  " a. level 2 Position of the letter: number alignment: left-aligned: 0.25", removal of text to: 0,4 "

  
  

  11 HR - heading 2

  • Formatting: Do = Arial, font style = "BOLD", size = 14pt, auto = Highlight, font color = auto (black)
  • Spacing (police): Normal, Position = Baseline
  • Advanced: Style = Normal, weight is "BOLD", Overline = Off, sets of fonts is agency FB
  • Style: Normal
  • Paragraph: Alignment = left
  • Indentation: Left = 0pt, right = 14pt, special = none
  • Spacing: Before = 14pt after = 14pt, special = none
  • Line spacing: Unique

  Word - heading 2

  • Style properties: Name = heading 2, type Style = linked (paragraph and character), Style based on = Normal, paragraph Style following = Normal
  • Formatting: Do = Arial, font style = Regular, size = 14pt font color = (black) = automatic underscore none style
  • Paragraph /Retraits & spacing: Alignment = left, hierarchical level = level 2
  • Indentation: "Left = 0", right = 0 ", special = none
  • Spacing: Before = 18pt, after 6 pt, line spacing = Single =
  • Point/line and Page breaks: Pagination = window and orphans + Dungeon with next + lines to keep together, tight wrap = None

  The gap you see is due to the definition of the styles. I guess the gap looks straight in HR.

  The gap is the total of the spacing before under heading 2, more spacing after the style of the list. Experiment with these two until you get something that is acceptable and also works when the lists are not respected by the title 2 and title 2 is not preceded by a list. Good luck with that.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Problems of mouse after the conversion of a hard drive file virtual Microsoft Virtual Server 2005 for ESXi 3.5

  Today I used VMWare Converter 3.0.3 to convert a file evaluation VHD Windows 2003 Enterprise Edition SP2 (Virtual Server 2005) ESXi 3.5. It seems to work without error. However, I have a pending issue. In other words, based on the results of pilot of "VMware Pointing Device" in my being rooted at the bottom right of the Virtual Console of the mouse. The mouse buttons seem to work, but the mouse itself will not move. I have VMware Tools installed and that you have reinstalled them several times, just in case. If I change the mouse driver to the driver "mouse Compatible PS/2", it works, sort of. It moves around the screen and the same slides perfectly in and out of the console window, as you'd like. However, it is jerky. Hardware acceleration is maximum. The video driver and all the other features seem to work perfectly.

  I converted a Windows 2008 VHD and it worked well.

  If I do a new installation of Windows 2003, it works perfectly, mouse and all. If the problem seems to be limited to a hard drive Windows 2003 virtual conversion. I don't have a Windows 2003 machine to test if the importation which would have the same bug or not.

  A very similar discussion was due in a previous thread several years ago http://communities.vmware.com/thread/36507.

  Any help to fix this annoying bug would be appreciated.

  Thanks in advance

  Normally uninstall us the services that we believe may conflict with VMware devices (such as mouse), so that these problems do not occur. But just to be sure, it would be nice if you could 'uninstall' as suggested CONTINIUM and see if that makes a difference. An only problem here, is that you will not be able to uninstall the present of the VMware VM and you may need to uninstall this VS VM before proceeding with the conversion.

  You can also see if this helps: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002239

  Post edited by: paragsha

• Areas of transparency in Photos

  When I opened the photos from Lightroom, transparent areas are appearing randomly in the photo.

  If I convert the background to a layer, the problem goes away.

  What is the cause and how can I prevent it?

  Win 7 16 gig Ram NVIDIA GT 220

  Thank you.

  Try to replace the GPU setting in preferences/Performance advanced to normal.  You need not resign for Basic.  Who should do until Nvidia fixes the bug of driver.  I had a similar problem and fixed it like that.  No real fall performance I have indicated so far.

• Compress or Partition or both compress table

  Hello
  I have an oracle with about 250 Mill table. records and to about the size is about 35 GB.
  I want to save space by compressing the table.
  
  I'm not sure that the compression is more efficient either table compress or divides within the table should be compressed, or both?
  
  Please advise,
  JP

  Hello

  It is a compromise between performance and manageablility.
  If you work with partitions, you give you a change to work with smaller data sets (which, in certain circumstances, unload your DB with useless IOs).

  For the rest it (space efficient) it depends largely on the nature of what you are compression (normal, blob/clob columns data... ' redundancy') and which method you use (mormal compression, compression advanced...)

  I suggest you try the various methods on a large enough sample of your table (partitioning / not paritionning, with advanced compression, normal compression).

  I also test in bulk inserts/updates / deltes (with heavy volumes) and also try main queries that you use on this table an IOs/CPU comparison

  I suggest you take a look at this:
  Implementation of the advanced compression

  (With volumes, I guess you'll receive (in most situation) compression...)

  Published by: user11268895 on July 22, 2010 11:11