LaserJet M128: pre-install the printer driver

I prepare about 40 laptops for use by our volunteers tax volunteer income Assistance (VITA) for the coming season.  I want to pre-install driver printer HP and public services on these laptops without a printer to connect via USB or wireless.  Once computers and printers are deployed on VITA sites, we configure printers and laptop computers to use the IP address assigned by the network of the site.

I would like to install the drivers and software advances so that the Setup program on the site takes less time.

Seems that the installation software will not work unless it can "talk" to a printer during the installation.

Any ideas?

Thank you

Hi @drew3820,

I see that you would like to know how to set up the printer on multiple computers via the cable network. I can help you with this.

I believe that with this model during installation, that need the printer to be connected and then you can configure the printer via Ethernet wired network. You wouldn't be able to preinstall the software of the printer on other computers if this is the case, which is inconvient. But you should be able to simply run the add printer on other computers Wizard, then navigate to the CD to install the software.

I hope this helps.

If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

Tags: HP Printers

Similar Questions

  • install the printer driver HP Laserjet 1020 windows 7

    Hi all

    I am here to share my idea to install the printer hp laserjet 1020 in windows 7.

    There no driver for windows 7 until mid-November.

    I installed the driver for laserjet 1020 on windwos 7, here is the method to install the driver of windows 7 for laserjet 1020.

    1. 1st download all laserjet 1020 base of the printer driver for windows vista. You can it to the bottom of this link

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategor y? product = 439320 & lc = en & cc = us & dlc = en & lang = en & cc = us

    2. After you download the driver for vista check it out same exe file with winrar and then go to Device Manager, then HP laserjet 1020 which is indicated as a device unknown and do right click on it and after this update the driver

    3 and after that go to the folder where extarct vista driver exe and select it.

    novel I ran no exe file.

    Thanks for reading. hope it will work for you

    4 and it will be installed without any problem like me.

    take care of all.

    Mokhtari

    Edit by Katie_H: fixed broken link

    Hello, again and again

    Here I downloaded the HD video to see better the HP Laserjet 1020 driver Windows 7

    If you have any questions please conatact me through yhis post or respond to it.

    Is this useful? Please let me know

  • Can not install the printer driver that nothing works

    I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.

    Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.

    Tom

  • hp photosmart 8050 printer, install the printer driver for hp photosmart 8050

    don't know how to install the printer driver for hp photosmart 8050, can't even see. Help

    There are two 8050 models, here are the HP instruction form

    http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01874792&CC=UK&DLC=en&LC=en&os=4062&Product=454816&sw_lang=

  • I'm unable to install the printer driver for HP OfficeJet G55xi

    I am trying to install the printer driver for HP OfficeJet G55xi.

    When I went to the HP site, it said to install Windows 7 operating system printer driver, by plugging the printer on my Windows 7 computer using a USB cable.  I did, but it was not installed.

    I also need to install the HP Director software.

    I had a computer technician to connect remotely to my computer to install the printer.  He had to install additional tools that are available on the same site where I tried to install the printer driver.  I don't know how he did, but I watched it.  Anyway, he managed to install additional tools, which resulted in the printer being installed correctly.

    It's a pity that the site where I download the printer driver does not provide adequate instructions for how to do this.  I guess the solution is hiring a computer technician to do it for you.

  • cannot re - installing the printer driver deskjet 920 HP computer Vistas (inadvertently, removed by mistake)

    When cleaning a Windows Vista laptop, I uninstalled the print driver for the HP Deskjet 920 because I thought it was for a different printer is no longer used.  Usually, you can just download a driver from the HP website; Apparently, this was included in the software for the computer when it was purchased and cannot be downloaded.  There is no way to re - install or I'll simply use another printer?

    Try to download the Deskjet 990c driver.

    (Shane_R) has a great post on how to do it.

    http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

    I would like to know if it works.

  • error 0X800f0214 when you install the printer driver

    When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

    Marc DS,
    It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

    Thank you, Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message when you install the printer driver

    First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

    My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

    Windows found driver software for your device but encountered an error trying to install it.

    In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

    If you know the manufacturer of your device, you can visit their website and check the support.
    My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

    Please sent me useful information.

    Thank you so much.you sent slove my problem how.

    It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
    step 1:
    Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
    step 2:
    Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
    step 3:
    I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
    step 4:
    I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
    I hope this answer helps anyone with a similar problem.

  • LaserJet P3010: Cannot install the printer. The print processor does not exist

    I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

    Problem solved. Use another port.

  • Cannot install the printer driver for Deskjet2540

    I recently brought a HP Deskjet 2540 to use with my windows 7 64 bit network wireless.  Install the first time on my laptop, it will not be installed on my pc.  Looking at the printer & devices shows the printer page is OK.  I try to print a test page reports that the printer driver is not installed.  It comes as I can get.

    Press the Windows key, and then type devices and printers

    Press enter

    Click with the right button on the printer, then click on troubleshoot

  • Can not install the printer driver. Error code 0 x 0000490.

    I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?

    Moved from Vista to install, upgrade and activate Forum.

    Hi Courtney,

    Please contact the Microsoft Community.

    I'd like you first try printing HP and doctor Scan.

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

    After that, I would have you to refer to this article-

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5241114

    We know if that helps your cause.

  • Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

    An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

    After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

    A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

    The installation program does not run.

    At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

    HP after reclamation / question without help until today.

    Dieter Jansen

    Hello

    I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

    For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  • HP CSI Shell has stopped working - cannot install the printer driver

    I just bought a printer LaserJet MFP M127fw Pro, but the installation of the pilot program still crashes. I tried 3 different modes of driver installation: the installation CD install HP Smart (USB) and download online, but I keep getting the same error.

    10-15 seconds after I start the driver installation, a pop-up Windows appears, advising me that:
    "HP CSI Shell has stopped working".

    I called HP customer care and they post in the computer section of the Support Forums.

    Does anyone have a solution to this problem?

    I have a HP Media Center PC with Windows 7 64 bit.

    Update:

    I tried the feature "Add a printer" windows default in Control Panel, and my printer is finally functional - only when used wireless. However, if I connect the USB cable from my printer, it will be recognized as a different printer and always unsuccessfully installed the drivers for it.

    If it works wirelessly, it is good enough for me.

  • How do you install the print driver FAX for m1536dnf in OS x Lion?

    Hi Forum,

    I have a Laserjet M1536dnf all-in - one network. When I install the driver under OSX Snow Leopard and Ubuntu, I have two shows of printers in the preferences panel. Regular printer and printer-fax MACHINE, so I can print to fax directly.

    But when I install the driver in OS x Lion, it shows only one printer, so I can't print to FAX directly. I checked the apple software update, there is no more than an update as well.

    Someone knows how can I install the FAX printer driver in OS x Lion?

    Thank you

    Noodle

    Hello

    Offer the product at a time print, scan and ability by retrieving the driver of the Apple software update.

    If you have installed the full features software, remove it by running the uninstall HP program located under Applications > CEJA-Packard and be sure to remove the existing print queue.

    Then Champagne for any update of HP software available.

    If the recovery of the printer HP Software Update fails for any reason, install the bundle HP Printer Drivers 2.8 below.

    Then the fax printer must be detected as well:

    http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

    Kind regards

    Shlomi

  • Printer/scanner Epson TX110 cannot install the printer driver

    Control Panel - Add/Remove programs. Details of the printer is displayed.

    Control Panel - printer and faxes - no icon printer not suggesting no driver in place.

    Reinstall using CD product a step only, that is, agree to the terms. Conversations with Epson have not solved the problem.

    Control Panel - Add/Remove programs. Details of the printer is displayed.

    Control Panel - printer and faxes - no icon printer not suggesting no driver in place.

    Reinstall using CD product a step only, that is, agree to the terms. Conversations with Epson have not solved the problem.

    If your second line means that the fax machines and Printers window is empty - NO printer icon - then the immediate cause is that the print spooler service is not running.

    Start the print spooler service as follows:

    Start > run > net start spooler > OK

    If everything works now, then fine.  More that likely, however, the print spooler service stops again.  If it does, the circumstances in which she stops (that is, what do you do when it stops) and all messages in the event viewer (start > run > eventvwr > OK) will help determine the cause.

    Generally, the print spooler service stops because a printer or a pending print job driver is corrupted somehow.  The indications here explain how to clean the printer drivers (necessary before re-installing) as well as all pending print jobs:http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Maybe you are looking for

  • Satellite A660 - CPU Whine

    Hello I recently bought a new Satellite A660. All right, except for two issues:1 - a keyboard problem: one key is extremely sensitive and is active on the slightest touch; I guess this isn't really a problem and can be solved by replacing the keyboar

  • What software I use to burn DVDs

    original title: DVD PLAYER IF I want TO BURN a MOVIE TO a DISC, WHAT SOFTWARE do I NEED TO DO, AS I HAD ROXIO, BUT the HAD NOT SEEN IN MY FILES OR OFFICE, BECAUSE WINDOWS IS REINSTALLED AND I THINK that HE DELETED ALL MY FILES.

  • HP P6674Y: Had to reformat the hard drive HP Pavilion the recovery disc sending the error message

    After reformatting the Original HP Pavilion drive I got the recovery disk, but I keep geeting a message If you receive this message on a hp PAvillion call HP support

  • Should what aio I expect?

    I'm stuck between the choice of the special edition of beats & envy 27 aio computer. I'm looking for a good computer with the best features, I want an optical drive to burn CD DVD &, as well as watch DVDs. I also want to accident coverage. We're goin

  • Do not recovery disc run in HP Pavilion Slimline S5210T.

    After the insertion of recovery in the HP Pavilion Slimline S5210T computer disks, nothing happens, one message to open and view the files on the disk. Product nr. is AW014AV #ABA. The system is Windows 7.  Tests show the hard drive OK. The computer