quick question on the connection of win 7

Similar Questions

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• A few questions after the downgrade of Win 7 on Satellite U940 - 11L

  Hello

  friend of mine bought the Toshiba Satellite U940 - 11L which had Windows 8 on it, due to some reasons that she wanted to have Windows 7 installed on it, which was pretty easy.

  Trouble came with the installation of the Symantec touchpad, after installing the drivers, it worked for about 10-15 minutes but then it stopped working.

  Tried to uninstall and install again but no luck, found a few discussions where it was suggested to remove all the devices, remove the battery and the power cord.

  Press the power button for 15 seconds and then power back on but still not lucky (I wasn't in the restoration of the default settings of the Bios I did not any change it outside disabling secure boot and replacing UEFI CSM that was needed to run win 7 on it).

  Tried about 4 different sources when it comes to the drivers but still does not work. I checked the Device Manager Dev but see no conflict, and it shows that the unit works fine but the problem persists. Please note that the drivers were specific to windows 7.

  Please if you have any suggestions we would greatly appriciate it.

  On another note, I'm not able to install the bluetooth it (HW ID shows as ACPI\TOS6205), I tried to install it several times but no luck because it always shows as unknown device in the dev Manager. The driver that I use is Bluetooth Filter Driver Package as info.

  Also, the computer is slower than it was with Windows 8, I suspect the reason for this is the fact that the installation of win 7 I accidentally erased part of the hybrid drive SSD (the size was 11.2 GB if I remember correctly, yes silly me...). I wasn't looking for a while on the net to see if there is a way to fix it but no luck so far.

  Thank you very much for your time and your suggestions!

  Tony

  With regard to the question of the touchpad.
  To my knowledge, the touchpad should work even if the Synaptics touchpad driver has not been installed. Windows system contains own driver that control the touchpad and provide standard settings. Of course after installing the Synapatics driver, you should get a few more options and features more touchpad.

  I recommend you to download the driver for the touchpad from Synaptics driver page and install it again: http://www.synaptics.com/resources/drivers

  With regard to the problem of BT.
  The laptop supports WLan Intel (Intel Wireless-N 2230) card that supports BT connectivity. Bt driver filter pack is ONLY necessary if you laptop would use an Atheros WLan card or Realtek WLan card. For the Intel WLan modules such package of filter is NOT necessary. To get BT to work, you must install the battery Toshiba BT!

• Quick questions on the CC student kit

  I tried to search the FAQ or customer support, but couldn't really find something where I could just after a small question about the recognition of things so... If you know what I'm looking for already feel free to guide me where to look for it.

  I was therefore interested to the kit of the CC student which includes all applications a year. (think it says about 2000 Swedish kronor, which is roughly around 200 euros).
  And so I saw was one of the best idenfications using your email from the school which includes stuff like ".edu".  The problem is that I have one, but only use us it as a registering or connect the credentials for our orders online. If this isn't an email that I can receive emails since then, so I'm just wondering if all I had to do was use it as a registering or the legitimacy that I am a student, or if it must be signed using this specific e-mail. I could talk about technology in school and get it set up, but he mentioned that it is somewhat lengty and or boring process then advised me to see if it was as a registering first egible before again us.

  If you know where I could have found this info in FAQ or similar stuff please let me know, otherwise I'd like a few quick answers to this. See you soon!

  Hi Nyom,

  I order to buy creative cloud subscription, you must have a valid email ID where you can receive by e-mail sent by Adobe.

  Given that the address you have is not where you can send or receive e-mails, you can go ahead and use a personal e-mail ID.

  If you purchase the subscription using an ID, you may be asked to provide additional proof of eligibility.

  Please see the shared document:student software discounts, the eligibility of the student. Adobe

  Please update the thread in the case of all other applications.

• I have 2 quick questions on the Adobe Creative Cloud membership. I currently have 2 children in high school.  (1) is the license for 1 or can it covers 2 users? (2) can they access it from PC or MacBook this year? Thanks for your help.

  Adobe community, I have 2 quick questions on Adobe Creative Cloud membership. I am considering the Adobe Creative Cloud 'Plan of the student' for 2 children currently in high school.  (1) is the license for 1 or can it covers 2 users? (2) can they access it from PC or MacBook this year? Thanks for your help.

  each single-user license, it's just that, for a single user and can not (legally) be shared between two different users.

  programs of CC can be installed on pc or mac.  each user can install on an unlimited number of computers, but can only connect to, at most, two computers at a time.  These 2 computers can be 2 pcs, 2 macs, or one of each.

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• A few quick questions about the Satellite P300 - 18 M

  Hello

  I am about to order a Satellite P300 - 18 M and have just a few questions about this:

  (Although these may apply for other similar Satellite/Equium P300.)

  Is the touchpad made by / to use the Alps or Synaptics driver?

  It has the Wireless N network card, is the map made by Intel or Realtec?

  And also, someone has experience with face recognition software to connect?

  If so, does it take a lot of time to initalise?

  Thanks in advance,
  Jack

  Hello

  The P300 - 18M belongs to the PSPCCE series.
  It uses the two touchpad drivers. Synaptics & Alps Electric
  There is an Intel 802.11agn minicards WLan installed

  The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

  But if you face is recognized correctly that the connection should work properly

  See you soon

• questions about the decommissioning of win 8 for Win 7

  I plan to install Win 7 Pro on my Win 8.1 on my desktop computer. My computer came preloaded with Win 8 and then I upgraded to win 8.1 by using Windows Update in Control Panel. So I have the computer manufacturers 64 bit Win 8 Support disc that came with the computer, but no Win 8.1 disk. I also have my old drive for Win 7 64-bit. My main concerns regard the problems potential decommissioning and also possible future problems if I decide to come back to Win 8 (regardless of the version then in force).

  I have two questions:

  (a) there will be problems if I decide in the future to upgrade Windows 7 Pro to whatever the current version to win 8 given that I only have my Win 8 of the manufacturer of the computer drive?

  (b) in addition to needing all the drivers for Win 7, are there other problems by going win 8 for Win 7?

  If you want to downgrade to Windows 7.

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer.

  If there are native drivers for Windows 7, there should be a problem.

  Prior to decommissioning, I highly recommend facility backup the Windows 8.1 currently on the disk, so if you decide to go back to Windows 8, you can simply save your data in Windows 7 and restore the image of Windows 8.1. Learn how to:

  How to create the System Image in Windows 8.1

  Decommissioning:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

• Question about the connection of a customer VPN ASA

  Hi guys,.

  I have a question about Tunneling VPN. I have an ASA 5505 with static PPPoE address external and local 192.168.202.0/24 network, operates as an EasyVPN server. On the other side is an another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN customer in customer ode. The internal network is 192.168.1.0/24

  It works very well! But now, I created another user who uses EasyVPN client software to connect to the EasyVPN server. This works as well.

  But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Please give me a hint.

  "But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Yes, if you set the ACL of split tunnel correctly you should be able to connect to the remote client ASA.

  Please follow the method of configuration of Cisco doc split tunnel, at the bottom of the link.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• quick question on the boxes:

  Hello
  
  Real quick question. In a form, is the uncheckedness or the checkedness of a box out like, 'true' and 'false '? Or what it output? Thank you

  Hi nonybd,

  Yes, it's exactly what he does. Also user standard Flash UI components
  have a property 'data' associated so that you can recover some
  associated information. For example, a checkbox that says, 'I accept' can
  have the data property set to "agreedfull". A secondary check may be
  "I agree, but only on part 1" and this may have data "adoptees1".
  Generally you should never check the Boolean property, but these data
  value is specified to make it just that much more useful.

  Kind regards
  Patrick
  BNM

  nonybd wrote:
  > Hi,.
  >
  > Real quick question. In a form, is the uncheckedness or the checkedness of a box out like, 'true' and 'false '? Or what it output? Thank you

• Questions about the connection to the Windows domain

  Salvation Group:

  Is there anyway to force the connection to the windows domain? I have

  don't want users to connect to their local account.

  There are number of login script I want to run

  on the computers of the users. Thanks for the help!

  Click on the text in performance and Maintenance, administrative tools and then double-click local security policy to start the local Security Policy Management Console.

  Under security settings, expand local policies item by clicking on + (plus sign) and select Security Options. Double-click Interactive logon: do not need CTRL + ATL + DEL, click the enabled option button and click OK.

  Regarding the script process is concerned, I recommend that you check out (good!) M Script Center $ (http://www.microsoft.com/technet/scriptcenter/default.mspx). Please be careful with the scripts, especially if you work in a corporate environment...

  Good luck

  Josef.

  PS - please rate the usefulness of the post.

• having suddenly emits turn off my computer as well as the questions after the connection

  It started randomly a few days ago.

  When I stopped everything simply is not extinguished. It will let 10-30 minutes and just restart and brings me back to connect. After the connection of that my computer strikes a blackscreen im could not use the mouse and enter the Manager tasks, but nothing else, after a minute or two my bottom and loading of the task bar and I can use my computer normally.
  what I can tell you is...
  I started in safe mode and this didn't happen.
  I ran msconfig and disabled all non-microsoft processes and it is happened
  I opened the event viewer and there seems to be a large NUMBER of critical errors from the night, I first shut down my computer and contained errors (25/08/2012 around 11:30)
  looks like this https://www.dropbox.com/s/1rkitvaaq69rlkq/Lucas-pc%20events.evtx (tell me if you can show that)
  Also I tried to restore my computer to the 24, but he won't do it for some reason any.
  Im running windows 7 64 bit edition Home premium
  16 GB of ram
  Intel 3, 5 GHz 17-2700 k
  2 x radeon hd 6870 in crossfire

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try turning off the auto reboot on the computer.

  a. right click on computer.
  b. click Properties.
  (c) advanced system settings.
  d. Advanced tab.
  e. startup and recovery settings.
  f. uncheck automatically restart.

   

  Method 2:
  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Method 4: as make that you followed the exact steps from the link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• General question about the connections of 3DES side2side ASA

  Hello I have a question for a project:

  We have an office outside our main building is connected via a connection to radio waves of 34 MB and a 10 MB darkfiber.today the radiowaveconnection is not secured and the client wants a 3des encryption and that he will use 2 ASA5510.there are also the 2 questions:

  I have a connections between eigrp process running and I know that the asa cannot deliver this protocol.so can I use the asa in transparent mode only for encryption or as side2side connection?

  She I the first time I work with the ASA so any help is appreciated.

  concerning

  Klaus

  This document describes how to use the Cisco Adaptive Security Device Manager (ASDM) to configure the Cisco 5500 Series Adaptive Security Appliance (ASA) to act as a remote VPN server. The ASDM provides the safety management of world class and through a Web management interface that is intuitive and easy to use. Once the Cisco ASA configuration is complete, it can be verified by using the Cisco VPN Client.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

• quick question on the DMZ and networking

  Need help please, I am a newbie to vm and need quick help...

  I have a well-configured firewall and 1 Server ESXi 5.5 configuration to test only at home...

  My firewall has 2 ports for internal network and one connected to my ISP

  I have the internal ports

  Port LAN ip 1 local schema with DHCP server running on the firewall

  Port 2 is DMZ, I have 4 static ip to use for remote mail, web server

  on an ESX Server, I have 2 NICs 1 plugged into port DMZ and LAN 1 port firewall

  What is the best way to separate these 2 and make them work

  internal vms example has no access to the DMZ and will have no LAN NIC, added to the virtual machine

  But Web servers and mail server should have connected NIC times and each nic gets entered the appropriate IP address based on what network card and the network it uses

  Can I use 1 switch vm and vm 1 network? or 1 vm change and create 2 networks? How to configure NIC and vmnetworks to communicate properly?

  Since you have two separate network, an in-house cards and a demilitarized zone, you will need two vSwitches. Each with a network card. The first will be your internal network and management, the other for the demilitarized zone.

  Then, you will need to create the appropriate exchanges.

• Quick question on the placement of a photo on top of the other

  Hello

  Just a quick technical question.  I cut out a picture of the two from wife of a desktop environment.  Then, I tried to make a scene of Times Square behind them.  When I did, it just isn't quite right.  In other words, the woman does not look like they are in the background scene, rather they look too strong.  I will put a picture up there...

  Please understand, I just worked on it for a few minutes and have to leave for a little while.  So while I was gone, I thought I'd get some save advise.

  Thanks as always to this great forum and all the pros,

  Bob

  For a reasonable quick fix you can just use the blur tool on the strong border girls or you can take the original selection of girls before putting them in Times Square and it soften a bit.