Quiz to start using the theme own Blue has a black background and ugly instead of transparent

Similar Questions

• I started getting the message "windows Explorer has encountered a problem & needs to close".

  I started getting the message "windows explore has encountered a problem and needs to close" when I try to run my camera videos but there always used to work OK

  Hello Terry,

  I would recommend from your computer in safe mode to see if the problem persists. If you do not experience the problem in safe mode, it's probably caused by a startup item. To isolate the problem, please perform a clean boot. I also recommend scanning for infections and update your drivers.

  * I'm moving your thread to our performance under xp forum

• I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade to the latest version and start using the universal or complex theme?

  I have a server/database running Application Express 4.1.1 and a server/database active Application Express 4.2.0. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Hi DJake,

  DJake wrote:

  I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Please read the documentation of the requirement for Oracle APEX 5. Ensure that your environment meets these requirements. Upgrade your oracle database or other software if necessary components and then you can go right 4.1/4.2 to 5.0 update according to the above-discussed upgrade strategies in the above discussions.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/pre_require.htm#HTMIG376

  You should go for upgrade of the Oracle APEX of 4.1 to 5.x. Regression test your applications to remove if any errors introduced by upgrade. The kickoff of a new project to migrate your applications to universal theme.

  Reference:

  • Re: upgrading to 5.0 - best practices
  • Re: APEX late upgrade
  • https://www.YouTube.com/watch?v=o8S4bg4Vo0A

  Kind regards

  Kiran

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Impossible to use the theme of the dynamics of the flora

  Original title: dynamic flora

  Hi, I am using the theme of the dynamics of the flora on my computer Windows 8, and it does not work. What should I do?

  http://Windows.Microsoft.com/en-us/Windows/flora-dynamic-download-theme

  This theme is an RSS feed. You should have an Internet connection broadband which is always activated. It's a dynamic theme. Try to download a different theme which is not dynamic and see if it works.

  Dynamic themes automatically add the new backgrounds for your desktop with an RSS feed (choose download attachments when him subscribe to RSS Feed? message appears).
  The images on this page are examples; There are more pictures in the RSS feed.
   

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• I have a copy of CS5 that is bought and paid for, has been installed and works, until I started using the creative cloud. Now it is considered as a trial, and when I enter the correct serial number it says it is invalid.

  I have a copy of CS5 that is bought and paid for, has been installed and works, until I started using the creative cloud. Now it is considered as a trial, and when I enter the correct serial number it says it is invalid.

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• just downloaded adobe first, but the open choice is not activated so I can start using the application. What should I do?

  just downloaded adobe first, but the open choice is not activated so I can start using the application. What should I do?

  Hello

  Please try to open the application in the menu (Windows) programs / library of the application (Mac) and see if it works.

  You can also check the following links

  Apps Control Panel does not show installed Adobe Creative Cloud applications

  Desktop application Adobe Creative Cloud lists uninstalled Adobe apps as up-to-date

  Pre-installed applications not shown as it is installed

• I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

  I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

  Lumetri Panel/workspace in PrPro is designed as a quick Fixer & able to mainly simple elements you may need to. And it has some limitations so built-in types experienced low editor/colorist can't screw up at all times of their videos. If this tool has everything you need, so it is very convenient. You do not need to learn a lot of ranking 'thought process', just look at your scopes & your program monitor.

  If, however, you'll need to tell secondaries 'Key' on some shades at certain levels of brightness/saturation to change just THE color, hue, brightness, saturation data, or a number of other things more important to the image, then SpeedGrade would be necessary. For me, I use the Lumetri Panel on the simple things, but... as Jim pointed out, if I want to hit secondary or make major changes, I'm more the Sg. Because after I learned that the app rather... unique... minimalist... UI, I'm actually able to move quicker on things over there than in the Lumetri Panel.

  SpeedGrade is not the same as applications other colorist/ranking, didn't say the vast-toolset of determination... but link Direct saves a TON to prepare sequences & projects on XML/EDL out and return & tel. If you go to work with her, I suggest strongly to e-book by Alexis Van Hurkman "Adobe SpeedGrade."... Getting started» It is still CS6... BUT... It covers quickly and directly how SpeedGrade works and how to do things you want to do, better than anything else I've seen. The big change is in the CC versions using the Direct link that you don't have any EDL input/output, and as all the scenario changes you make through PrPro, both the chronology controllling/replacement parts of Sg is grayed out in a project of direct link (directly using a project file PrPro). The interface... different color... is almost identical to the versions CS6.

  In addition, there are some good programs on service tutorial lynda-dot-com, and some that are quite useful on SpeedGrade in AdobeTV that will give you the look more recent Sg and Di-link process. Maybe you spend a few hours in watching & playing around, but once you get this thing is pretty easy to use.

  I do not recommend having a ramp... a block of neutral gray tones will generally from left to right black (0) to white (100) that you can put on a timeline, see to the Sg, and then look at what is happening where when you change what... so that you get a feel for say overall "initial" three color wheels/luma sliders , which left elevator control, controls gain way Gamma and right hand do... and you need to see that the elevator is * not * the shadows... and then, when you change moves on the shadows, mediums and highlights and always looking three combos of luma/color controls, now what region they change? What control on how these controls affect the image data pivot controls provide?

  It sounds more complicated than it needs to use, really... you just can't guess what they are doing and being puzzled at the first/frustrated when things do not respond as you expect. A few graphics and several simple explanations & examples... and you'll be off and running.

  Neil

• Photography plan Cloud creative student and Teacher Edition (one year) and no idea of how to get and start using the programs?

  So I just brought the creative plan Cloud photography student and Teacher Edition (one year) and no idea of how to get and start using the programs?

  Hello

  Go to creative.adobe.com and you identify with your Adobe ID

  From there, you can download the applications you purchased.

  Normally, you are taken there immediately after the purchase.

• I have tried, using the, trial version, creative, cloud, I, signed, until and started, the, download, download, is taking a long time, so, I, decided to cancel, she and buy, year, plan, pay, mont hly., I, started, download, creative, cloud, once again, bu

  I, tried, using the, trial version, creative, cloud, I, signed, until and started, the, download, download, is taking a long time, so, I, decided to cancel, she and buy, year, plan, pay, mont hly., I, started, download, creative, cloud, once again, but, downloading, was interrupted, by, ma, firefighters dau, by inserting, key usb, peripheral, in , the, USB port. , Could, not, I believe, downloading, I, signed, in, adobe, and now, tells me, that I, a, 30, day, trial, My, account, shows, that I have, I, p helps, my, first of all, every month, slice, but, I can only use a, trial, version, who, says, goes, e arentheses, 30, days., which can, I, do, for, get, the full, each year, the intention, version?

  Jacobm51486856 please see in Sign, activation or connection errors. CS5.5 and later for more information on how to resolve the error of connection that prevents your membership being authorized.

• When I use the left arrow FF tends to go back two screens instead of one. Also when I close a tab (Web page or e-mail) FF and TB sometimes both minimize

  When I use the left arrow FF tends to go back two screens instead of one.
  Sometimes when I create a new tab it opens two instead of one.
  Also when I close a tab (Web page or e-mail) FF and TB sometimes both minimize
  When I opened a project in Tbird, if I close it, the set of Tbird farm.
  When I create a copy of the project and save to drafts, when I recover, there many other added characters generally upper and lower case or some other character.
  Both applications are up to date.versions 38.0.5 & 31.7.0
  Help!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also try another mouse in case there is a problem with your current mouse and check the double-click setting in the mouse driver software.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety