R12.1.1. install question

Similar Questions

• Free Windows 7 Upgrade Clean install questions

  Hi, I have recently buy a Mini 5101 it comes with XP Pro and Vista Business... I currently have Vista Business installed on it. I wonder about the process of upgrading to windows 7. On the free upgrade Web site it is said that the operating system can be upgraded to windows 7, according to the weather, I have vista (upgrade straigh) or xp (must be a stable cleaning). Now, my question is can I perform a clean installation with this upgrade? I know that normally you can perform a clean install via the insertion of the disc of the previous operating system media during installation, but as the Min 5101 is a netbook (no cd drive) I will probably install it via a USB key. It is very important for me to have a clean install.

  On the upgrade Web site, it says that if you are using XP pro, you must perform a clean installation. It would be better for me to install XP now order the update, and then install Vista so that I can get the version that will allow me to perform a clean installation - or I'd get the same disc anyway?

  I know the installation disc doesn't have not yet been outside and not so should know the process entirely. Kind of hope that someone will have knowledge on this subject.

  The installation media will allow you to perform a clean installation 'upgrade' using product key of the current operating system during installation. This allows him to check that you are upgrading from a previous version of Windows.

• Exchange Rollup 9 install question 2010SP3

  Fresh installation of Server 2012 and Exchange 2010SP3.  Update rollup 9 won't install.  I ran the installation with elevated privileges.  Side GUI of Jules Destrooper says it all right, but the version stays the same.  Link to the log file.  https://www.dropbox.com/s/1oi8u51s6u1infl/rollup0-Thursday.log?DL=0

  This battle has been going for a while now. :(

  In addition, I don't see a category to put this as to questions of change...?

  Bill

  
  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• HP Compaq 6370b: Clean partition Win 7 install question

  My first post.

  I have a laptop HP Compaq 6370b, S/N [number of Series edited by Moderator] running Win XP and plan on running a new install for Win 7 Pro 32 bit. I have upgraded the BIOS (as suggested by the forum) at F.20 on 16/12/2014 and reviewed messages on the partition for HP tools. My question is when I format the existing HHD I must add a partition for the HP tools? A response by Dragon fur message leads me to believe that the download and installation of HP tools UEFI create a folder on the operating system drive and I would not require an additional partition.  Thanks for your help.

  Hello

  Should uefi tools be installed on a separate FAT or Fat32 partition to work properly

  When you download and run the UEFI software, the installer will give you the opportunity to automatically create the HP_TOOLS partition (if it does not already exist on the HARD disk) - for more details, see the "Prerequisites" topic on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3687781&swItemId=ob_129420_1&swEnvOid=4053#TAB4

  Kind regards

  DP - K

• KB2668562 update error install question

  I run Vista Home premium 32-bit with Vista SP 2

  Like many yesterday, I downloaded and insalled microsoft updates for February 2012.

  And like many, I got an error with the update of Silverlight 2668562 KB

  Then after I have installed all the other updates I received a default on KB2668562\\So see the 80070643 error code message, I went to the

  get help with this error link

  Panel aide said error can be caused by Microsoft Office 2003 or Windows .NET framework. I don't have Microsoft Office 2003, I had to conclude that the error was due to Windows .NET framework.  So I clicked on the link on how to run the error code 80070643.

  This page contained a fix it (fix 50123)

  So I ran that repair. Then after the fix, it is run, I noticed that I can't run the 2668562 KB

  Then I come to the microsoft answers and notice that there is a problem with the update and not my system

  BUT and this is where my real question isSince I ran the fix it and was not necessary, that will cause problems for my system?

  1. . I don't see the patch in my list of updates (see history of update). I know that in the past that "fixes" would come in the history of windows updated

  (Control Panel > Security > Windows Update > view update history). Does that mean that the fix, it didn't run and install?

  2. MORE importantly

  If a course set (50123) for Windows .NET Framework and this difficulty, it was NOT necessary, run this fix it mess up the computer?

  See http://answers.microsoft.com/thread/083d0a9f-6aa7-42bc-b805-1aab0bcddfe9

• FIX - IT UTILITIES PRO INSTALL QUESTIONS

  Two questions with Fix - It Utilities 10 Pro. When you try to install a drive e., aborts the installation with the message 'drive F is not valid. I don't have an F drive. On another laptop, he asked my PC serial number which is on the bottom of my laptop startating with serial number. The application says he won't and offers a test installation. I bought the package and to install

  Problem with this 3rd Party software, contact where you bought it from.

  Manufacturers should be able to offer support for their product.

  See you soon.

  Mick Murphy - Microsoft partner

• vCenter Server install Question

  Hello fellow professionals of computer science,

  My question is based on 1 single step in installing vCenter. The part of the installation that I have a question about is the destination directories. In this step, it gives you the option to use the default directory or change the directory where the server vCenter Server is installed. Then just below that is the ability to change the directory data for the vCenter Server server are installed too. My question is when he says data do you mean virtual machines? I ask because I have little space to work with the vCenter Server alone. If the data for the vCenter server means computer virtual vhd then I can change that to a SAN that has at least 5-6 to a value space.

  Hello

  The vCenter Server allocates any virtual machine inside the disks.

  This means installation vCenter only data. You point where the virtual machine is preserved when you create a new virtual machine (normally on storage)

• VCenter 5.5 install question for vCenter single sign on Information

  During the new installation of Vcenter Server on Windows 2008 R2 SP1, I get "Error 29102"

  My DNS and reverse DNS work; It is again first Vcenter server and it refers to the log file does not exist anywhere vm_ssoreg.log don't know why her attempt to find a look up of service which does not yet exist on the system

  Using the fully qualified name or IP give the same message and I was careful to not use of ' not to use these "characters tried different passwords to be sure

  Not sure I like this new feature

  Had to just go back and install custom in the proper order:

  vCenter finger Sign-On

  vCenter Inventory Service

  vCenter Server

  Installation used Simple was at the origin of the questions so I uninstalled but did not use the condition of things now work

  Mike

• First time to install Question

  I am doing my first bare metal installation and I got myself confused.

  I have a new Dell with a Perc H710 server and I downloaded the ISO of ESXi 5.5 1 cumulative hotfix driver 2 (includes the VMWare tools). I also downloaded the Perc adapter driver file megaraid_sas - 06.803.52.00 - 1742752.zip, because the H710 did not appear in the PDF which goes hand in hand with the ISO.

  The instructions for the Perc driver said to copy the VIB on the ESX Server. But how does the installation if the Perc drive must be installed?

  So I guess my real question is what is the correct process to follow to install ESXi on my server?

  Thank you!

  Hello

  was the easiest would be to download the DELL custom image ESXi. It should include all the drivers.

  You can download 5.5u1 here: http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=N509V

  Concerning

• Application of Office Manager & ch & LR install questions

  Hello everyone.

  I searched the threads and can't find anything that relates directly to the questions that I have.

  I'm trying to download PS & LR on my second machine. First LR & PS downloaded perfectly on my desk.

  Now, I am trying to download on Microsoft Surface Pro 3.

  Initially downloaded relatively easy application manager. Then PS loaded at 42%, as others have mentioned. I had nothing else open at a time.

  I tried several methods to try to make it work.

  I have disconnected and reconnected. I tried directly from the Adobe CC Desktop Apps page.

  Today, in another attempt, I uninstalled the application manager. Now I can't even to load. I put install, came back two hours later and always around 75% and did not move after another 20 minutes.

  I noticed that he was trying to download 32 Bit where my system is 64 bit do not know if this is the problem. ?

  Any ideas or help would be most appreciated.

  Concerning

  Andrew

  Thanks to those who responded.

  My problem was that I wasn't getting all error messages, and in the end, I couldn't even download the application manager. for other threads have been unfortunately useless. I tried something a little different. I took the 3 pro surface and he sat next to wireless router where I knew he would get excellent connection. That resolved my problems. Now, I have PS, LR, BR downloaded on my second machine. It ended up being a connection slow speed after all that. If someone else is having the same issues, may also give this a go.

  Andrew

• R12.1.3 - General question about patching of intermediate level

  R12.1.3 running on RH Linux 5.8.  Just applied PSU to the 11.2.0.3 database and now by looking at the Jan 2014 CPU refers to

  Oracle Fusion Middleware 10.1.3.5 and patch 16802091 .

  Now, in my last attempt to clogging, I made the correction to the database but I only did the correction of Middleware.

  If I look at it is seems to be a process quite simple patch but I'm not sure what about my setup $ORACLE_HOME.

  The Guide says to make sure that the $ORACLE_HOME of environment variable is defined but that normally gets together at TOOLS 10.1.2.

  Do I need to put it to 10.1.3?

  If I do that then opatch is set incorrectly.

  Also can I assume by default my 10.1.3 Oracle_Home is 10.1.3.5 or how to check that?

  If the patch is for 10.1.3 ORACLE_HOME, then you must set sourcing $INST_TOP/ora/10.1.3/.env file.

  Once you source this file env, question "echo $ORACLE_HOME" and he must return the ORACLE_HOME 10.1.3.

  For opatch, if you issue "what opatch" then it should point to $10.1.3 ORACLE_HOME/OPatch/opatch

  Thank you

  Hussein

• CS5 Production Premium - install question

  Yesterday I installed CS5 Production Premium.  When you are prompted for the location of where to install the files, I left it as default (C:/Program Files).

  After installation (which went well), I saw that the programs have been installed as follows:

  C:/Program Files/Adobe:

  -Adobe After Effects CS5

  -Adobe Media Encoder CS5

  -Adobe Photoshop CS5 (64 bit)

  -Adobe Premiere Pro CS5

  -Common

  -support

  C:/Program Files (x 86) /Adobe:

  -Adobe Bridge CS5

  -Adobe Device Central CS5

  -Adobe CS5 yet

  -CS5 adobe Extension Manager

  -Adobe Flash Catalyst CS5

  -Adobe Flash CS5

  -Adob Photoshop CS5

  -Adobe OnLocation CS5

  -Adobe Photoshop CS5

  -Adobe Premiere Pro CS4

  -Adobe Soundbooth CS5

  -Utilities, adobe - CS5

  Question: Why the programs are installed in different folders (Program Files Program Files (x 86) vs?

  Thank you very much

  Angela

  You have installed the operating system must be 64-bit:

  So applications Adobe which are 64-bit based gets installed in the 64-bit location is C:/Program Files/Adobe:

  32-bit Adobe Apps gets into 32-bit (x 86) i.e C:/Program Files/Adobe location:

  Photoshop is that is supports 32 and 64 bit architecture, so its gets installed to the location of two.

  Can run Photoshop from anywhere.

• R12.1 Oracle install on OEL 4.5

  I managed to install a R12.1 Vision instance on a laptop running OEL 4.5 (the server). I can bring to the top of the home page of Apps on the server itself and access the Oracle Applications Manager pages. I can connect to the database using SQL and SQL Developer * a portable client XP more, but I can't connect to the home page of Apps with a web browser - I tried IE and Firefox.
  
  Real Message from Firefox:
  
  "Firefox can't establish a connection to the server m4300.vistech.com:8000."
  
  I can successfully ping the URL of the XP machine.
  
  I would like any ideas or advice on this topic.
  
  Thank you!

  Hello

  When I type the IP address of the URL (192.168.0.3) I get the same error message.

  Did you check if the firewall is disabled on the application tier node?

  I checked the error logs Apache that I could find and does not see the error entries (... VIS/apps/tech_st/10.1.2 and... VIS/apps/tech_st/10.1.3) let me know, that I should check.

  I assume that Apache is up and running, correct? Apache log files (error_log * and access_log * are located under the $LOG_HOME/ora/10.1.3/Apache Directory).

  I don't have any errors after installation, but if you think I should run AutoConfig again, I will do so.

  AutoConfig execution to ensure that there are no problems with the demand side.

  Kind regards
  Hussein

• BEEP in Oracle EBS R12.1 - characters in question marks

  Hello
  
  We have recently upgraded to EBS 12.1.1 and have noticed that since doing so, outputs of some characters in PDF format (from BEEP reports run in EBS) are displayed as question marks.
  
  Models are created by using the Arial font, and the characters that are not displayed are "long dashes" "-" (being) and where Microsoft Word group three openings of the diaphragm together «...» "(\'85)
  
  
  For example, the text in Word format and in the PDF file when run using Oracle BI Publisher Desktop is:
  
  
  Three openings of the diaphragm...
  A long terms-
  Short a dash-
  
  However, the output in PDF format when you run the report in EBS is:
  
  Three openings of the diaphragm?
  A long line?
  Short a dash-
  
  
  
  Has anyone previously met, or nobody knows how to solve. I tried downloading a file of font Arial and creation of maps (although Arial is already under a seeded font file), but this has not solved the problem.
  
  
  
  Concerning
  Carl

  Hello

  Check if you have all the necessary fonts under your jre/lib/fonts ($AF_JRE_TOP and $OA_JRE_TOP) on all of your nodes and web simultaneously. Or, try to copy the fonts from $FND_TOP/resource (check post install steps for XMLP 5.6.3). Rebound of mid-range necessary after copy.

  I hope this helps.
  Rownald

• R12.0.4 upgrade question

  I'm 11.5.10.2 to 12.0.4... in the upgrade done to update as follows:
  
  I could run autuconfig on wihtout problem side db. As I ran:
  
  Start installing quickly by typing rapidwiz at the command line. Click Next on the Welcome screen to switch to the operation of the wizard screen.
  Select the upgrade to Oracle Applications version 12.0.4, option and then click Next.
  In the select the Action screen update, select Configure update version 12.0.4 Instance
  
  
  In the flow associated with screen, full directory path to install quick point in the context of Applications file. It is located in < INST_TOP > / appl/admin/< SID >
  
  + < Server > .xml. +
  While I show this file at the end of the process to upgrade by mistake!
  
  When I looked in the xml file I saw the variable are wrong! (such as ebs port etc.), I decided to re-create the xml file and I source r12 env file and run this command and I:
  
  Perl adclonectx.pl contextfile=/u01/VIS/inst/apps/VIS_oracle/appl/admin/VIS_oracle.xml
  
  Copyright (c) 2002 Oracle Corporation
  Redwood Shores, California, USA
  
  Applications Oracle rapid Clone
  
  Version 12.0.0
  
  adclonectx Version 120.18.12000000.5
  Please make sure that the Classpath is correctly set
  
  I checked Classpath and it gives me:
  
  echo $CLASSPATH
  
  +/U01/vis/apps/tech_st/10.1.3/appsutil/JDK/lib/DT.jar:/U01/vis/apps/tech_st/10.1.3/appsutil/JDK/lib/tools.jar:/U01/vis/apps/tech_st/10.1.3/appsutil/JDK/JRE/lib/RT.jar:/u+
  +01/VIS/apps/apps_st/comn/java/lib/appsborg.zip:/u01/VIS/apps/tech_st/10.1.2/forms/java:/u01/VIS/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/VIS/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/VIS/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/VIS/apps/apps_st/comn/java/classes+
  
  All ideas
  
  Thank you

  Helios,

  Click on "10.2.0.5 (Server Patch Set)" link in the same document, and you will find something like the following:

  Should be fixed in 10.2.0.5--> this Patch Set does not yet exist.

  However, the issue should be fixed with the version of higher database (11g).

  Kind regards
  Hussein