EliteBook: portable pen no longer works after reinstalling windows

Similar Questions

• Sound no longer works after reinstalling Windows XP

  My hard drive crashed, so I had to reinstall Windows XP. My sound no longer works, and I've tried everything... followed all instructions and advice from support and still NOTHING. My devices does not even appear in sounds and Audio devices... all grey so I can't make adjustments. In Legacy drivers, it is completely empty... I can't not try hard. Help, please!

  You need to install device drivers for example chipset motherboard, graphics card, map its etc go;
  (1) cd is included with your PC
  (2) the site of PC makers, so a large OEM Dell, HP or laptop - specific to your model, for example
  (3) the sites of manufacturers of equipment if a generic PC

• FN keys no longer work after reinstalling Windows

  After a reinstall of windows that my fn keys are not all work, some do, but the little icon which appeared which shows the process of fn key while using it does not either

  Should which driver I reinstall?

  Thanks in advance

  You must install the utility of Vap and flash card support, then

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Dell XPS 14z 3 USB port no longer work after reinstalling windows

  Hello

  I have re-installed windows on my XPS 14z,

  Installed all the drivers (chipset Inc., bios, etc.).

  updated all windows updates.

  but the driver of the USB port of the SS was not installed. (you can see on the device as "Universal Serial Bus (USB) Controller" Manager without driver)

  I've looked everywhere, I tried Dell PC checkup, pilot automatic search etc.

  On these forums, I saw a similar problem with the XPS 15z and tried their solution without success.

  can someone point me to a driver?

  Thank you

  Hi Avp40,

  Has solved my problem when I re - installed "Texas instruments TUSB 7320" driver from the driver disk.

  Hope this helps you.

• Qosmio F60: EasyControl bar no longer works after reinstall OS own

  Recently I did a clean reinstall of Windows 7 (64-bit), so miss me all the bundled Toshiba software.

  On my Qosmio F60 EasyControl bar no longer works accordingly (the buttons work again, they just don't have any effect on the volume, mute etc..).

  Does anyone know how to fix this?

  I guess that it may require simply download and install the driver from Toshiba, but I'm not sure that something is.

  Any suggestion would be appreciated.

  Hello

  What exactly do you mean by EasyControl bar?
  Do you mean the bar that appears just by pressing the FN keys?

  Have you installed the package of value added?
  If this is not the case, to do this.

  Pilots should be available on the European driver Toshiba page.

• Reference Dell 375 Bluetooth no longer works after update Windows 8, R296919, blocked by the Compatibility Assistant programs - how to fix

  Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8

  Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working.  Moreover, they could is more to be discovered to pair them up.  Device Manager showed all works very well.

  Failure of attempts to repair:
  -Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
  -Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919).  The installation was quickly blocked by the program compatibility Wizard.
  -With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work.  Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes.  Still could not pair.
  -Check in Bluetooth services and services were running.

  What worked:
  -Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
  -Enable the following:
  Remove Program Compatibility Property Page
  Turn off Application compatibility engine
  Disable the program compatibility Wizard
  -Run services.msc and stop the process of Bluetooth
  -Extract the R296919 in a directory
  - on R296919.exe and select run as administrator
  -For me, the installation failed the first time.  Then I repeated it, and it was installed fine, but required reset, which I did.
  -At this point, I was able to pair Bluetooth devices again.
  -Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.  and select Properties.  Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK.  If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
  -Reverse changes in GPEdit to not configured.
  -Reboot

  How to avoid the problem:
  Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.  on the update and select Hide update.  Microsoft has had quite a few black Tuesday lately, and this update is just another example.

  The above post started as a question.  While typing what has not worked, I developed the answer.

• Pad at the top of the keyboard no longer works after installing Windows 7

  I have a cl dv7-1273.  Just changed from Vista Home Premium 64 for Windows 7 64.   Win 7 installed OK.  After you install the pad at the top of the keyboard no longer works in the dialogs like this.  When I entered the numbers here I had to use the keypad.  Keys still work in Word, Excel, Evernote, etc..

  Someone on the forum had the same problem of pad during the upgrade to win 8.  They solved the problem by uninstalling Comcast constant guard.   I removed a constant guard and now my keypad work.  Is there something in constant guard that is in conflict with the keys from HP laptop during upgrade to Win 7 or 8 Win.

• HP EliteBook Notebook PC 2560p: missig drivers after reinstalling windows on elitebook p2560

  Dear support,

  After you have reinstalled windows on my p2560, I get the message of missing drivers for:

  -System base of the unit,

  -Ethernet controller

  -Network controller

  -PCI Simple communications controller

  -Unknown device

  The HW ID are:

  Base system device:

  PCI\VEN_197B & DEV_2392 & SUBSYS_162B103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_162B103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  Ethernet controller:

  PCI\VEN_8086 & DEV_1502 & SUBSYS_162B103C & REV_04

  PCI\VEN_8086 & DEV_1502 & SUBSYS_162B103C

  PCI\VEN_8086 & DEV_1502 & CC_020000

  PCI\VEN_8086 & DEV_1502 & CC_0200

  Network controller:

  PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C & REV_01

  PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C

  PCI\VEN_14E4 & DEV_4353 & CC_028000

  PCI\VEN_14E4 & DEV_4353 & CC_0280

  PCI Simple communications controller:

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_162B103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_162B103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  Could you please provide a list of links to drivers I need to install?

  Thank you!

  Hello

  Yes, that's all.

  Download and install.

  Yes the Softpaq Download Manager auto detects missing driver and auto update it.

  Concerning

• Pavilion Dv7-3110ea: Dv7-3110ea wifi not working after reinstalling windows

  Hello.  I reinstaled windows on my laptop and now the wifi does not work... I cannot turn on wifi... only bluetooth...  I think I need to reinstall the drivers, but I don't know where I can find them.

  Any help please?

  I have had no problem the two wifi driver download available. I chose the download-only, without using the wizard to download from HP. See the following pictures.

  

  

• Internet / wifi doesn't work after reinstalling windows 7

  Hello, so basically, I reinstalled windows 7 Home Premium x 64 Operating System and it seems that some drivers are missing. I bought a new hard drive and 4 G of ram... I installed them, and the laptop is HP Pavilion dv6-2137sl Intel Core i5 CPU m430 processor, 2.27 GHz with 6 G of ram now.

  When I looked in the Device Manager I saw other devices: Base system device Base system device Base system device network controller unknown device unknown device. All have the yellow triangle.

  I tried to install a driver, Realtek PCIe GBE Family Controller driver, but after installation, it gives me the following message:

  Realtek network controller was not found. If deep sleep Mode is on please the cable.

  I don't know what that means.

  Any help would be appreciated

  Hello

  Pleae try installing the chipset Intel and Intel MEI first, then RESTART the machine. After that, try LAN (wired) again and then run updates of Windows 7. At the end, perhaps only one or two missing, please come back. You probably already know the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4105352#N267

  Kind regards.

• All USB Ports no longer works after that Windows 7 update error Code 52 Dell Inspiron

  How repairing USB ports when they have all stopped working after updates. Error Code 52 Dell Inspiron 1720. Pilot not signing not recognized.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• my keyboard does not work after reinstalling windows xp home addidion, it workrd for a short time but seemed to stop when I was in a session of powerpoint.

  When I look in hardware/keyboards, it confirms that a keyboard is connected, keyboard Standard.

  I susspect keyboard is u/s Strawberry is not another computer to try out it.

  Its aps2 not a usb connection.

  ?

  Hello
  It sounds like you need to reinstall the drivers for this keyboard. It is likely that when you reinstalled Windows, all the old drivers have disappeared as well. So, I recommend two things.

  First, visit the website of your computer manufacturer and update all the drivers. For example, if you have an HP computer, go to the HP site and find your specific computer it. Then download all the drivers that have been updated for the PC.

  Secondly, you may need to download the drivers for this specific keyboard. In this case, you will do the same as above. Go to the website of the factory (on the keyboard) and find this specific model. Then download the drivers

  I hope this helps. Just reply to the results.

• Sound not working after reinstalling Windows XP

  Hello!! I recently formatted my hard drive and reinstalled Windows XP. I get not all sounds, even the normal beeps and boops and not even my moniter.

  When I look inside Start--> Panel--> sounds and Audio devices, it says I have no audio device.

  I checked my set of external speakers, and they seem to be plugged into the computer and power (the light on East)

  Any suggestions?

  Hello Merry_Girl,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the XP community, and would be better suited to the XP community.  Please visit the link below to find a community that will provide the support you want.

  Windows XP newsgroup community

  Try installing the drivers from the manufactures website.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Gmail no longer works after reinstalling the operating system

  I posted on a forum for Gmail and no one answered. But on the fact that I can access these gmail accounts via web browser and Microsoft Office, I think there must be a problem with the configuration of Mac. I'd like some suggestions to solve my problem!

  Recently, I have reinstalled the OS El Capitan on my MacBook Pro 2013 retina. Before the reinstall, I could access all my Gmail accounts through the native application of Apple Mail. Since then, I couldn't access any of my Gmail accounts via Apple Mail.

  I tried to disable the two-step verification, but which is not resolve it.

  I deleted all count them several times and follow the steps below, but still can not get added (don't say one of the definitions to be insane is doing the same thing twice and expects a different result?

  Here are my steps that I take every time:

  When I connect, I use my Gmail password.

  Accounts/new Internet account

  Select Google

  Enter my user name and click Next

  Enter my password (not the specific app password, but the password for Google. I tried both and he always tells me that I have to use the Google password.)

  Click next

  The dialog box then says "select the applications you want to use with this account (and the logos of Google lies at the top of this box.).

  My options are:

  Mail

  Contacts

  Calendars

  Messages

  Notes (all logos Mac for those apps)

  All are checked, but I uncheck everything except Mail

  Click done.

  The gray button 'Complete' on

  Finally after that probably 60 to 90 seconds, I get a message through Mac OS that says 'Google account you added'"[email protected] has been added.

  In this box, I gives me the options of 'Not now' or 'enable '.

  If I select 'Enable', then I get the message through Mac OS that says 'Google password required'. I get my password, and the cycle repeats again and again.

  If I select "Not now" then the account appears as 'Inactive' in my list of accounts on the internet. Once I selected, I am immediately invited for the password... and the whole process starts again.

  Facts:

  Accounts are active IMAP.

  Accounts have two factors of authentication disabled. If I turned it on, the same things happen, with the only exception to receive messages and receive through my method to deliver, security code, but once I entered it, it can still access my mail.

  I have four other Gmail account, and what is happening in the same way with them all.

  They are all very well via a browser-based email

  They are all accessible through my iPhone and iPad.

  I can't access any of them through the native mail app Apple.

  They are all accessible through Microsoft Outlook e-mail client (2016)

  I even tried to disable the option to allow 'less secure apps.  I tried it on and outside, and nothing works.

  I'm ready to give up all my Gmail accounts at this point.

  Any ideas (other than to get rid of Gmail!)

  If you have not tried this, after completing the settings, try to delete Internet accounts. Go to Mail/preferences/accounts, and then add the accounts there.

• R12 login page no longer work after reinstalling VMware

  Hello

  I installed 64 bit 6.3 OEL and R12 12.1.3 successfully installed and was able to connect in R12 of Linux (guest) and Windows 7 (host).

  Due to a problem with the updates of Windows 7, I had re installed Windows 7 and then installed VmWare on it. Then I loaded the saved file vmware in Vmware workstation, but this time R12 login page does not work both OEl and Windows 7. I changed the IP in/etc/hosts.

  Error: the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I am new to linux and EBS r12. Is there a solution to solve the problem.

  If you have changed the IP address then you must purge the FND_NODES table and run AutoConfig on demand/database layer nodes.

  How to get a clean auto-configuration environment? [391406.1 ID]

  How to clean non-existent nodes and IP addresses ranging from FND_NODES [ID 260887.1]

  Thank you

  Hussein