R4 loss EA - procedure of distribution - utility

Similar Questions

• R4 loss EA - Planner string GUI - utility

  In SQL Developer version 4 (early adopter), the default view for a string of Planner has changed a lot.

  
  

  In version 3.2, the screen is start and end, chain linked by a mesh of steps (displayed as square icons) related rules (displayed as lines). Visually, it looks like a canvas or fishing net. It is very useful to see the flow of the chain and the dependencies for each step.

  
  

  In version 4, the screen is a (displayed as icons of green Gable) steps in a single line. The rules seem to be woven into a single blue line connecting the icons of pinion. There is a significant reduction in the utility. You can see is more the relationship between the steps.

  
  

  The new icons are fine, but please restore the web effect for rules.
  

  Thanks for this, I have generated a similar chain with the information above.   I now see the messed up display.

  After a diagnosis, it is a kind of interaction with java 1.7 and netbeans and swing.   However, there is a solution

  In the/sqldeveloper/sqldeveloper/bin of

  There is a file sqldeveloper.conf

  If you change and add a line

  AddVMOption - Djava.util.Arrays.useLegacyMergeSort = true

  Then restart sqldeveloper and reopen your channel.

• Distribution of VMware Player

  How can I get information about how to distribute VMware Player?

  On the page http://www.VMware.com/products/player/FAQs.html I read that " VMware Player is free for personal and non-commercial use." VMware Player is only distributable with written permission from VMware. Apply here to request a distribution agreement. ».

  How can I get additional information about the procedure (and the costs, if any) to a distribution contract?

  Concerning

  Marius

  Greetings,

  Marius wrote:

  Thank you for your message.

  First of all, I hope that you can get a touch of the player_distribution team.

  So far, I was unable to get in touch with that whatsoever on this matter.

  Be patient, I am confident that you will get a response.

  To be honest, I was not aware of the existence of the team of player_distribution and yours it the first reference I see: is it possible to get in touch with them? They have an e-mail address, a request for information page or something like?

  Again, if you have filled out the contact form, then I am confident will contact you. As for an e-mail address, I had a response to an email are [email protected] .

  I'm still waiting for a response to the message I sent from the reader page, weeks and weeks... Furthermore, if I can't get information about the procedure of distribution before you enter data into the form I would have to consider a different technology.

  Again, please be patient, I think you're going to get a contact. Also know that I share your frustration regarding the difficulty of using the drive with a project you want to deploy and/or share with others. I do not understand the agreement of long duration for a free download tool. And I believe that the proliferation of the player help only VMWare. I'm just a petition for a simpler model for people like me and maybe you.

  Concerning

  Mario

  I hope that people of VMWare will consider the dialogue on this issue and respond.

• Is the another great category why my computer is slow?

  I get a lot of beach and the General slow balls spinning this month.

  One thing I checked last week my storage status. 237 free GB to 999 GB and 618 for which is the category "other"!  I hate this wave "other" category. Here is a screenshot.

  

  You can see that I have barely keep anything on my internal drive. I don't have a lot of applications. The ones I use regularly is Mail, Safari, Lightroom and Photoshop.

  A few years ago I learned about a procedure in disk utility to completely erase the disk space, but when I went to do, I couldn't find more, as El Capitan got rid of him. Is there something similar I can do?

  Is this large amount of yellow on the bar as alarming as it looks and probably why my computer is slow?

  Thank you!

  p.s. in another thread, I will post about a glitch that happens with my trash. Maybe it's related.

  The function of Secure Erase of Trash was removed to El Capitan. One of the reasons was that it worked as expected. The other is that it reduces the life expectancy of the SSD.

  I would suggest your download and install OmniDiskSweeper. When you rum ODS, it will tell you the names of the files and folders that use the most space. You can then decide for yourself or ask us what can be detected or moved.

  The first step in the process must be a full backup of everything.

• OOM on weblogic 10.3.2 JVM@check_alloc

  All the
  
  On Linux 64 bit machine and weblogic 10.3.2 we receive very often OOM.
  
  
  
  I used MissionControl to see if there is a question of JavaHeap, but I found none. I noticed there is a steady increase in the use of physical memory where as the heap of Java use was increasing and decreasing in regular intervals (GC).
  
  Thanks in advance for your help.
  
  Here are the details for hardware and startup params appserver
  
  uname:
  2.6.18 - 164.6.1.el5 xxxxxx #1 SMP Linux kills Sep 27 11:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
  
  weblogicStartup:
  
  /Apps/jrockit6-64/bin/Java-Xms2048m-Xmx2048m - XXsetGC : genparcon - Xns : 1536 m-da-Dplatform.home=/apps/bea10.3.2/wlserver_10.3-Dwls.home=/apps/bea10.3.2/wlserver_10.3/server-Dwli.home=/apps/bea10.3.2/wlserver_10.3/integration-Dweblogic.management.discover=false-Dweblogic.management.server= http://server-prod1 : 9400 - Dwlw.iterativeDev=false-Dwlw.testConsole=false-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=/apps/bea10.3.2/patch_wls1032/profiles/default/sysext_manifest_classpath-Dweblogic.Name=Server01-Djava.security.policy=/apps/bea10.3.2/wlserver_10.3/server/lib/weblogic.policy weblogic. Server
  
  Exception of the log file:
  means: allocation, 11055935600 loaded, 4140625920 fingerprint JVM@check_alloc (src/jvm/model/classload/classalloc.c:118) of the class. 2760 byt
  at sun.misc.Unsafe.defineClass (Native Method)
  at sun.reflect.ClassDefiner.defineClass(ClassDefiner.java:45)
  to sun.reflect.MethodAccessorGenerator$ 1.run(MethodAccessorGenerator.java:381)
  at sun.reflect.MethodAccessorGenerator.generate(MethodAccessorGenerator.java:377)
  at sun.reflect.MethodAccessorGenerator.generateMethod(MethodAccessorGenerator.java:59)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:28)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at weblogic.spring.monitoring.utils.Delegator.invokeGetBoolean(Delegator.java:21)
  at weblogic.spring.monitoring.utils.AbstractBeanDefinitionDelegator.isPrototype(AbstractBeanDefinitionDelegator.java:59)
  at weblogic.spring.monitoring.actions.CreateBeanElapsedTimeActionState.setAbstractBeanDefinition(CreateBeanElapsedTimeActionState.java:19)
  at weblogic.spring.monitoring.actions.AbstractBeanFactoryCreateBeanAction.setArguments(AbstractBeanFactoryCreateBeanAction.java:36)
  at weblogic.spring.monitoring.actions.BaseElapsedTimeAction.preProcess(BaseElapsedTimeAction.java:58)
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:379)
  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
  at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
  to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
  at org.springframework.context.support.AbstractApplicationContext.getBean(AbstractApplicationContext.java:880)
  at com.app.distribution.util.ApplicationContextLoader.getBean(ApplicationContextLoader.java:23)
  at com.app.distribution.ejb.BatchDistributionMDB.onMessage(BatchDistributionMDB.java:49)
  at sun.reflect.GeneratedMethodAccessor93.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy90.onMessage (Unknown Source)
  at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
  at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
  at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
  at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3748)
  to weblogic.jms.client.JMSSession.access$ 000 (JMSSession.java:114)
  to weblogic.jms.client.JMSSession$ UseForRunnable.run (JMSSession.java:5096)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  You can have a leak of native memory due to dynamically create new classes and do not let them be GCed. Try to run with - Xverbose: class and see if the number of classes is increasing constantly. If so, you must fix the leak in your application.

  Henrik

• Partitions of disk utility 2 combined with data loss

  I have a 1.5 TB drive external that I use 1 TB for Time Machine, 480ish Go for some storage media and then I got a score of ~ 20 GB with Yosemite on this. I decided that I is more to Yosemite partition so open THE and got rid of the partition of Yosemite. When it was done the space in the partition was dumped on the storage partition. So far so good.

  Why the media stored on the storage partition is gone? I don't mess with this partition at all, except to add the deleted partition.

  I was hoping to get a clue of what I could do to recover directories for these data. I am relatively sure that I do not erase, but somehow combining both partitions clogged the directory (I think) and the data are, therefore, more "Visual". The data are mainly video I have saved over the years and am not prepared to lose if it can be helped.

  Any contribution is appreciated.

• Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

  {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? }

  This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XEN) purchased from July 2008 (via Getech educational scheme). We have (had) Kaspersky Anti-virus on this subject, but since his license has expired (and they didn't really like it), I was going to remove and install Avast.

  Kasperky removal instructions involve have their tool "kavremove" who say their instructions must be run in safe mode. So, after downloading the tool, I pressed F8 to boot into safe mode...

  ... And that's where things went wrong. Instead of typical black screen startup options screen, I got a splash screen at the level type, with a request for password of "Phoenix TrustedCore Setup Utility. We have never set a password on this computer, and I've never seen this particular screen before. After three bad guess (of course they're wrong!, and it does not matter if I leave the field blank), the unit turns off.

  Now when I turn it on, it just goes right to the request for password of Phoenix: I hit F2, F12, F8 or whatever it is. I can't establish why it should do, or how I can possibly bypass it. None of my password guess work (of course).

  I googled for hours (literally), closes the thing, I could find were instructions in [a post on the forum USA | http://forums.toshiba.com/t5/Windows-Vista-Windows-XP/Satellite-A205-Cannot-Access-BIOS/m-p/123075#M7749]. It was a partial solution: we can start the machine with this procedure (phew!).

  Unfortunately, it is not a permanent solution. After EACH stop, at the next start-up presents impossible demand "password." So it comes to pull the battery (again), to the phase of "discharging", battery, turn on and - it boots. Or at least, he has every time so far.

  This is going to be extremely painful. Any tips or to tackle the problem of pointers, which would be welcome. I will never see this request for password "Setup Utility".

  Thank you!
  David
  Edinburgh, UK

  Hello

  I think the password loss is the BIOS password.
  I m wondering why this password is displayed when starting if you have not set it

  However, the point is that the BIOS password can be removed if you n t know this password.
  Unknown BIOS password can be removed by a Toshiba authorized service partner.

• I can't find "score" in disk utility.  I used it when I implemented the system.  Thank you.

  I don't find the Partition tab in disk utility.

  It is not a.

  Partitioning of a hard disk:

  http://www.Kenstone.NET/fcp_homepage/partitioning_tiger.html

  To resize or add/delete an existing partition without data loss, you need to use, for example, iPartition:

  http://www.Coriolis-systems.com/iPartition.php

  But first of all it is important that you first save all partitions on a separate volume, any loss of data.

• Device not found in airport 6.3.6 utility

  Running a 5th generation I'm stuck. I checked a bunch of other posts and restarted all devices, as well as reset the base station. I also adjusted IPv6 at the local level.

  When I pull up the Airport utility, I get "device not found" and cannot connect to the base station to adjust settings. What is weird is I can get temporarily in Airport utility if restart my MacBook and the base station at the same time. However, it does not last long. I also see the drive mounted in the Finder all the time. A Wi - fi connection works without interruption.

  I tried this on 2 Macbooks, an ipad and an iphone. El Capitan running. I am at a loss.

  Someone at - he was able to solve this problem.

  You are one of the many ad today with this problem.

  for example. There is only one thread.

  Time capsule not recognized in the utility of the AP

  I suggest that you can still access the AE or TC using configure others and type the IP address.

  A 5th generation is the flat and quite old but more reliable than Gen6. But beyond 5 years they get flakey.

  If you mean a 5th Gen TC then this is the newest one.

  I am surprised, he's also missing on the iOS but who was more reliable version of airport utility.

• data loss Time capsule

  It is a sequel to my earlier post regarding the loss or inaccessibility of my 900 GB + backup to time capsule.

  (1) I came across this message: "no mountable sparsebu on file systems.

  (2) disk utility doesn't see time capsule

  (3) when you want to check the time capsule, I get this message:

  

  Is this a case of support technique apple?  Please, someone, let me know... Thank you!

  Unfortunately, your backups are corrupt and disk utility can't repair them.  Click Start a new backup to clear the damaged back ups and start over with a new backup.

  You can certainly call Apple support if you want, but they will tell you the same thing.

  More information about this embarrassing problem is here:

  http://pondini.org/TM/C13.html

• Mac disk utility mini reports of failure of the SMART State

  I have a Mac mini that I bought 4-5 years ago and have been using it without any problem.

  However, yesterday when I try to wake my mac mini I get a black screen with only the cursor.

  I force turn off the system and restarted, and then use disk utility.

  I immediately noticed that the only partition of my Mac mini is highlighted in red, and the SMART status showing as failure.

  There is also a warning saying that my hard drive has a hardware problem that cannot be repaired and suggested to save all possible files.

  When I try to make the permissions and disk checks, all reports like OK.

  I'll do a backup in case where, but curious, it is always possible to use Time Machine to back up to this point?

  I also need to back up my settings browsers and programs if it is still possible. Any help is very appreciated.

  Make a backup as soon as you can - Time Machine or a bootable backup: s-for-making-a-bootable-backup.html http://www.macworld.com/article/2461362/drive-cloning-utilities-the-best-mac-app

  In case of loss of data already, there is no doubt not that you can do about it now. Replace the disk as soon as possible.

• AirPort utility

  I just added two AirPort Express units to my Time Capsule to expand my network.  Only one of the AirPort Express units appear in Airport utility, but both have the green light.  How can I find the 2nd Airport Express AirPort Utility?

  It is possible to "extend" by connecting a fast into the Capsule of time using a wired Ethernet cable... which gives best performance... or... by connecting the Express using a wireless connection... which unfortunately will result in a loss of about half of the maximum on the network speed.  With two expresses, the loss will be unfortunately much more.

  You are using Ethernet or wireless to connect Express devices to time Capsule?

  There will be more questions, but to go on the right track until we can make a lot of progress.

  In the meantime... try powering down of the entire network... all devices... in any order you want

  Wait a minute

  Start the modem and let it run for 2-3 minutes

  Starting the device connected to a modem and leaves turn a good minute

  Keep the commissioning of the devices at once a minute outside until the entire network is back

  Recheck the network

  Any change?

• How to use the utility to update (uefi) BIOS HP

  Notebook: G62 a10em

  I downloaded the BIOS update tool from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 4226...

  and it is installed on my USB key.

  Now, how can I update my bios?

  The USB key contains now:

  BIOS

  | - Current (empty folder)

  | - New (empty folder)

  | - Previous (empty folder)

  BIOSUpdate

  -CryptRSA.efi

  -CryptRSA32.efi

  -HpBiosUpdate.efi

  -HpBiosUpdate.s09

  -HpBiosUpdate.sig

  -HpBiosUpdate32.efi

  -HpBiosUpdate32.s09

  -HpBiosUpdate32.sig

  my current version of bios is f. 08

  I did a cut above.

  After looking at the appropriate file you downloaded, it says this:

  "Prerequisites .
  -Microsoft .NET 2.0 is required. UEFI and Custom Imaging - the HP BIOS update must be run from a FAT or FAT32, partition with a volume of the "HP_TOOLS" name This Installer gives you the option to install on the hard disk (HDD) or USB. If you install on the HARD disk and the HP_TOOLS partition is not present, Setup prompts to create the HP_TOOLS partition. If you install on a USB key, Setup renames the partition on the USB in HP_TOOLS. If you use a custom image, you can create the HP_TOOLS partition manually with the type FAT32 and that the volume HP_TOOLS name. ATTENTION:-the UEFI system partition is not protected and can be removed. -Backup of the computer by using the complete PC Backup feature of Microsoft Windows Vista does not save the UEFI system partition. For these reasons, HP recommends that you place no additional data on the UEFI system partition. Because the partition is not backed up, corruption or failure of the partition will result in the loss of all data on the partition, as well as the loss of UEFI functionality. "For more information, visit: www.hp.com/go/techcenter/startup"

  There is little documentation on how to use it, but a Member here figured it out.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/envy-14-system-recovery-doesn-t-work-with-latest-BIOS/m-p/328684/highlight/false#M45165

  using Windows 7:

  Just plug in the USB key and then run the SPnnnnn.exe BIOS file downloaded from the Web site drivers HP.

  Assuming that the USB is configured correctly (see below), Setup the BIOS sees the HP_TOOLS partition on the USB, copy of the BIOS and its file signature on the USB key, then run Setup winflash. The system BIOS detects the USB and the partition HP_TOOLS and the BIOS is magically updated.

  I put in place a new USB key as follows:

  1 rename the partition HP_TOOLS from the hard drive to something different like HP_TOOLSbak

  2. Plug the USB

  3. Download and run the utility to update the BIOS (not the BIOS, still) drivers HP support page.

  4. Select the option to install to a USB

  5. Select the option to create the partition HP_TOOLS

  6. The reader should now be formatted as HP_TOOLS with a record of Hewlett-Packard containing BIOS and BIOSUpdate records. The BIOS folder contains empty current, news and previous records.

  7 download and run the HP System Diagnostics (UEFI) MS drivers HP support page

  8. Select the option to install on a USB key. This will create a SystemDiags folder under the Hewlett-Packard folder

  9. Download and run the HP Notebook System BIOS update for the HP support page drivers, given that the USB is correctly tagged it will install the update of the bios on the USB drive

  10, we have to end up with a HP_TOOLS partition on the USB drive identical to the one that you removed from the hard drive.

  Once you have configured the USB drive, you can upgrade to other versions of BIOS (most recent or oldest) using this drive, as I mentioned above: just plug in the USB and then download and run the BIOS Setup program.

  Having said that I'm not sure of what you do, once you boot the USB drive.

  .

• Loss of web access remote Firefox by ISP technician

  Today, 2011 December 25, I lost internet access. 'Server not found '. I tried to reset procedures with the help of technician of the ISP (TWC). We have isolated the loss of my browser Firefox version 3.6.25 operating on my iMac with OS 10.4.11 2002. This platform cannot accept new versions of Firefox. Do you still support this combination? If so, can you help me get internet through my iMac?

  This message is sent to a MacBook Pro with OS 10.7.2. We don't have a Firefox browser on this computer.

  Best regards, Fred gray

  Hello cor - el,.

  Thank you for your response. However, the problem was solved when I found a faulty connector in the ethernet cable from my computer to the router.

  Sincerely,

  Fred gray

• Qosmioplayer installation procedure

  Hi Forum users,.

  Any of you have experience with installing Qosmioplayer? Is it mandatory to set up or prepare the HARD disk for intallation Qosmioplayer? How can I do?

  It will be very useful if someone can give specific explanations about his.

  Thank you very much

  Hello

  There may well be other ways to install the player, but the methods below worked for me. The installation can be tricky because Toshiba uses a partition 'hidden' for the player. In some countries, the Qosmio laptop is sold without the TV tuner, so the Qosmio Player is not installed. Therefore, this 'hidden' partition must be created by the recovery of the Qosmio player CD.

  As much as I know the Qosmio player should settle on the space not partitioned at the end of the HARD drive. This free (unpartitioned) space capacity must be at least 100 MB. The best way to create this free space is to use a tool like Partition Magic Partition. Partition Magic is a tool very simple to use and very powerful. You will need to reduce the size of the last partition of the HARD drive at least 100 MB. Make sure this unpartitioned free space is created at the end of the HARD drive.

  After the creation of the free HARD disk space, start the unit with the recovery of the Qosmio player CD by pressing 'C' on the keyboard at startup. Then Qosmio player will be installed on a partition hide on the HARD drive. Moreover, this hiden partition may not recognized by Windows XP or Partition Magic disk tool.

  The other way to install the drive, I tried once, is first install Qosmio player since the recovery CD of the Qosmio player on a free HARD drive with no partitions without BONES, nothing. The CD is bootable and when you start the notebook the C button press to boot from the CD/DVD. For a new installation, select option 1. After a few minutes, installation procedure is completed.

  After that, I installed OS using the recovery DVD and selecting the Expert mode option. In expert mode, it is possible to choose the partition on which the recovery file must be installed. If the HARD drive has no partition, the recovery utility will generate a. The size of this partition can be adjusted. The field size is marked, simply insert the size in MB.

  Finally, re-run the recovery of the player CD Qosmio i.e. make a re-install, in order to restore order to start player Qosmio and the Windows XP operating system.

  I hope it works for you, for me, now I can watch DVD movies, but I'll have to wait for the TV ENSA is release in my country.

  until...

  [Edited by: admin]