R61 fedora running won't go into bios

Similar Questions

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• How can I configure my computer to it won't go into power saving mode every 2 min

  How can I configure my computer to it won't go into power saving mode every 2 min

  How can I configure my computer to it won't go into power saving mode every 2 min

  Change the configurations screen saver and hibernation / sleep appropriate for your desires.

• How to go into bios on hp pavilion 2237EZ g6 8 64-bit windows running

  Hey there guys, im new here. I had this problem of the computer hp laptop pavilion g6-2237ez. I can't understand how mode bios... im using 8 64-bit windows. I tried almost all function keys when it starts up but no luck with that. Can someone help me please?

  Hello:

  Welcome to the HP support forum.

  I believe that these new W8 BIOS, you must tap the ESC button right at the beginning of the HP welcome screen to get a menu of options.

  One of the options should be an option F10 to access the BIOS.

  Then you press the F10 key at this time here.

• How can you get into BIOS on a Satellite 320 CD.

  Hi my name is steve, I was wondering how get you into the BIOS on a satellite 320 CD. Because it's my first format at the top of a tower. Done a lot on the office laptops just never. As some fool tried to do before me and distroyed it. Now the only thing that happens is when the toshiba logo disappears this message appears, INVALID SYSTEM DISK, REPLACE THE DISK, THEN press ANY KEY. It allows to run Windows 98 and it worked great for what age there. Hoping to put XP on it, but its only got a small hard drive (4099 mb). So will hand 98 on it until I get a bigger hard drive. Only need to teach my daughter how to respect a laptop. I want to get into the BIOS for the format. No instructions on how to enter the BIOS would be great, because I'm good from there. Thanks in advance for your help.

  Hello

  You suggested that you want to enter the BIOS to format the HARD drive. Very strange.
  However, if you want to boot from the CD so you can also use the C button immediately after the power button.
  The laptop should boot from the CD of Win98. The installation procedure contains a HARD drive format option.

• Satellite L840/020 - can't get into BIOS after enabling the quick start option

  I have a laptop Toshiba L840/020 (PSK8LA-020007). I recently installed a 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on this Intel and enabled the fast boot option in the BIOS (boot speed > fast).

  Now I can't get into the BIOS, no matter what I do. I tried pressing the power button / stop while pressing F2 (as suggested by a few other forums), upward on default that I tried all F and Esc keys, but nothing does. I also tried repeatedly pressing F2 during startup, plugged a USB external and supported on F2 keyboard on it, but no matter what I can't get into the BIOS.

  When I go to the Toshiba support download section > 8 64 bit Windows, I see also a BIOS update for my laptop, but when I try to install I get the following error:

  ---------------------------
  Error
  ---------------------------
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1
  ---------------------------
  Ok
  ---------------------------

  I'm not changing platform.ini and flash, without first asking the help of the community.

  Please let me know how to enter the BIOS. Thank you.

  null

  Hello

  First try INS then F2 key.

  Then you should be able to access the BIOS, I recommend disabling the QuickStart in the BIOS if you can successfully enter the BIOS.

  With regard to the update of the BIOS.
  I checked the page of the Toshiba driver to THE and it seems that the BIOS v6.20 is even similar to Win 7.
  I think that the BIOS update must be done running the system pre-installed Toshiba since Win 8 is not officially on the market, and to my knowledge, there are some big restrictions updated BIOS running Win 8

• HP pavilion g6 notebook: how to go into bios on hp pavilion g6 using windows 8.1

  I have a hp laptop pavilion g6 for laptop, I can't get into the Bios, could let me know what Fkey I need to press,

  I am running Windows 8.1 thank you

  A, Hart

  Hello

  Try the following.

  Shut down the laptop - it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Robinet tap away at the key esc that you start the laptop to access the Start Menu, then select the option in the Bios ( f10 ).

  Kind regards

  DP - K

• Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

  Hello

  I own Satellite Pro C50-A-1E2.

  Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
  I am trying to get into the BIOS but without success.

  I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

  I found this piece of information through Googling: "press f2, and then press power. But always without success.
  Help with my problem?

  Thank you.

  Hello

  Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

  Check it out.

  By the way: for some series laptop, press INS key then F2 worked too.

• Can't get into BIOS on my Satellite M50D-A-103

  Hello world

  I want to put my Satellite M50D-A-103 to boot from USB. I put USB as the first boot device using the Toshiba system configuration utility in Windows 8. Does not work. Now, I want to get into the BIOS, but I never get there. I tried ways imaginable all pressing F2 and ESC keys (hold while turning on and keep holding, hold when turned on, but after 1 second or 3 seconds or as soon as Toshiba logo appears, press on after turning on, press once Toshiba logo appears, continue to press it or just press repeatedly it...) , but I never get into the BIOS.

  I tried to open the laptop to remove the BIOS battery to reset, but even with all the screws removed, I can't seem to remove the bottom of the laptop plastic.

  Any suggestions?

  Best regards
  Stefan.

  > I tried to open the laptop to remove the BIOS battery to reset, but even with all the screws removed, I can't seem to remove the bottom of the laptop plastic.
  Hey what are you doing? You want to lose your warranty? Do not do stupid things. Remove the BIOS battery you will not reset the BIOS. It is not simple desktop machine.

  Please proceed to a full stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm - and after boot up your laptop, press F12 and you will enter the start menu with the option to enter the BIOS settings.

  By the way: anything create using preinstalled recovery media creator Toshiba recovery media before you.

• Can't get into BIOS after the use of "Quick start" mode

  Hello

  I do things
  1 - Enter my BIOS
  "' Quick start of start 2-change of speed to.
  Then I restart my knees and Toshiba logo disappeared.

  I want to get into my BIOS again, but how
  I tried F2, F12 and del not question

  Please help me

  > I ve tried F2, F12 and del no question

  What cell phone do you have exactly?
  Have you tried to press ESC, then F1?
  If this isn't it!

  Notes; You must press the buttons immediately after the laptop has been powered!

• Re: How to run the update to the BIOS of the DOS - Satellite A100 PSAA8A command prompt?

  I'm having some trouble with my GF Satellite A100 (PSAA8A). When installing a new HARD drive with a clean install of XP, I flashed by chance, one of the BIOS when installing drivers. Its kind of bricks now.

  Using a floppy disk CD boot, combined with the update of the V6.00 BIOS, I goes to a DOS command prompt, but not sure where to go now.

  Under * Tradional BIOS update *.
  See the link: [http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  It is said:
  + 1. Extract the zip file containing the BIOS upgrade to a temporary folder. +
  + 2. Three subfolders will be generated in the temporary folder. "docs", "update - 3.5' disc', 'Update - CD - R or CD - RW +.
  + 3. Insert a 1.44 MB diskette formatted in the floppy disk drive. +
  + 4. Run the *.exe file in the folder "" Update - 3.5 disk ". Follow the instructions on the screen. A BIOS update diskette will be generated. +

  But there is no 3 folder. There is only a single called S10VWF that contains Winphlash etc. (see photo url). As far as I know, I can only run Winphlash Windows environment due to its GUI. Then what should I do? Help!

  http://img.Photobucket.com/albums/v259/tRUkbOY/S10SWF.jpg

  Hi Brett

  There is a little thing that you have forgotten or supervised.

  The BIOS you downloaded is a version of BIOS to WIN. It s not traditional BIOS update!

  The description published in your ad describes the update using the traditional BIOS.
  But the Toshiba driver page only provides updates of BIOS based VICTORY. The BIOS can be upgraded only from Windows operating system running.

  Please don't mix these two possibilities of updates!

• HP Pro 3515: cannot get into BIOS with 3515

  I have tried for two days to ge in the BIOS but failed. None of the traditional keys happen to me. After much fumbling I managed on the basis of two times get the configuration screen, but could enter the BIOS. In the installer, I chose to accept default start, but for a long time my boot process was not quite normal. I always get a press F1 to start down in the lower left corner of the screen; I don't know why that happened. If I go ahead and press F1, it starts and runs normally. I wonder if it has something to do with UEFI?

  Here is a notice that I found on the specifications page.  Does not appear to describe your problem?

• Can't get into BIOS

  I just bought a side 130 for my girlfriend for Christmas and wanted to set up today.

  But I just can't get into the BIOS! I keep on pressing F1 during the startup Lenovo screen.

  I have pressed it several times, he broke down, I even tried with the Fn key. Nothing has worked.

  I have been working with and professional support Lenovo (and IBM) laptops for more than 10 years and not once I had such a problem. It is only the second E-series phone I've ever had. I bought myself an E525 last summer and had no such problems and to work, we have T, X and W-series.

  Am I missing something? Am I too old? :-D

  Any help would be appreciated.

  Thanx

  The twist, I completely power down the laptop - meaning, hold the button for 5 seconds (the closure of normal windows will not suffice).

  Then, when you turn it back on and see the Lenovo logo for the first time, you should see the message "press on enter to interrupt Boot", press ENTER, and then you will get a menu of options, one being to enter the bios.

• HP Pavilion dv7 won't enter the BIOS. Anyone (Esc, F9, F10, F1, F2 etc.) on the key

  Hello

  I have HP pavilion dv7, which leaves me not in the BIOS to change the boot order.

  I have windows 8 32-bit installed and keep start normally any key (Esc, F9, F10, F1, F2 etc) at the beginning, is pressed or hold... it will not stop the boot and won't let me in the BIOS. All it does if the keys are pressed, it emits beeps but boot then anyway.

  I want to boot from USB and install WIndows 8.1 64bits.

  Help, please.

  Thank you

  This could help you as it solved my problem yesterday. I disabled quick start (or quick start) in the settings menu of your laptop. I have turned on one day, not knowing that it prevents you from all the boot options. I'm at work and do not have access to a large part of the internet, but google "disable fast boot windows 8 ' or 'disable' quickboot. There are quite a few Web pages that walk through it.

  I am now able to access BIOS.

• My Win 7 Desktop won't go into hibernation

  I entered "Power Options" and used the default settings, the cumputer won't sleep or go into hibernation.

  If you have been using the application of disk cleanup, please read this tutorial

  http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  Excerpt:

  If you accidentally wiped out the Hibernation file Cleaner to clean disc and caused your Eve hybrid or extended mode to stop working, then you have disabled accidentally the hiberfil.sys file