R7000 DHCP connectivity issues

Similar Questions

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• Mac pro wi - fi connectivity issues

  I have the same problem, it seems that many people have with Wi - Fi connectivity issues.  I just bought the Macbook Pro in December 2015.  My computer goes to sleep and when I open the hood it looks like I'm connected to wireless, but I'm really not!  I'm going to websites, and they won't open.  I disconnect my wi - fi and reconnect and sometimes it works, but sometimes I actually have to restart my computer.  For the moment, at the end of the day I'll stop my computer, then restart the morning I guess.  It sometimes seems to lose its connection during the day too, I guess because he falls asleep.  Very frustrated.  Just got this computer in December and have had this problem since I use the computer out of the box.  I was told it's because I haven't had my update of El Capitan, did, but it wasn't the problem.  Technical support suggested a few other things we also went through and those who did nothing either.  Don't know what the problem is or how to solve this problem, or even if I can if so many others have this problem.  I think it's a matter of Apple and the wish that they would be admitting the problem and try to find a solution.  Apple of love, but right now quite disappointed.  Quite expensive computer for issues that I am.  I went from a Dell for an Apple thinking it was the best thing since shirt pockets, hmmm...  I don't think it's any problem with our modem, wireless, router, etc., because we have other laptops, iPads, iPhones in this House and have NO problem.  So, I hope that everyone is not running out to buy new routers and modems because no doubt this is the problem at all.  PLEASE APPLE, DO SOMETHING TO FIX THIS!

  Hold down the Option key while you click on the wireless icon in the menu bar. You get a screen similar to the following:

  

  what you get for channel and mode PHY?

  What CISOS or the signal strength?

  What emission rates?

  very important and how many other networks do you see?

• Hi my game Center leaves me not to accept friend requests, load any games im unable to load data because of connectivity issues and the King Games I have when you want to send queries, you need to connect whenever fbk his shit

  Hi my game Center won't let me load any games or accept friend requests and when I try to accept queries etc. of friends on my King of games it's connect to facebook every time his shit. phone says on the game center connectivity issues I am not worked before

  Hi, kitecatgirl.

  Please visit Apple support communities.

  I understand that you experience connectivity problems when you access Game Center accepting friend requests.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you are unable to connect to Game Center or stay connected, follow these steps:

  1. Make sure that you are connected to the Internet.
  2. If you cannot create an account or sign in to Game Center of in a game, try to create an account or sign in with the Game Center app.
  3. Sign out of Game Center, then reconnect. If you can not you connect to Game Center with an Apple ID, reset your password, or use another email address. To manage your Apple ID, see my Apple ID.
  4. If you use a connection Wi - Fi, be sure that your Wi-Fi router is configured for Game Center.
  5. If you can't connect to a Mac, continue with the steps to solve the sign in questions.

  If you have a problem with a game of Game Center, follow these steps:

  1. Make sure you have the latest version of the game. To check for updates, go to App Store > updates.
  2. Test your connection by using a different game. If you cannot connect with a specific friend or player in multiple games, they might need to check their Wi - Fi connection and router settings.
  3. On iOS, try opening the game to the home screen, rather than the inside Game Center.
  4. If you cannot resolve the problem, follow the steps described in the next section to report the problem to the developer.

  Game Center on your Mac or iOS device using

  See you soon

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Connectivity issues while trying to connect in spades to MSN on the computer

  * Original title: msn Spades - he works?

  I can't log on to msn Spades; something about connectivity issues; can someone help here?

  Hi Steve-Bob,

  Thanks for posting your question in the Microsoft Community Forums. I'm sorry to hear that you are facing connectivity problems while trying to connect in spades to MSN on the computer.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  I would like more information about the issue.

  1. What is the exact error message?

  2. what browser you're using connection?

  3 have there been recent changes made on the computer before the show?

   

   

  If you are using internet explorer, please follow these methods and check if it helps.

  Method 1: Verify the problem by running Internet Explorer mode without modules.

  Temporarily disable all add-ons to see if the modules are the origin of the problem.

  To temporarily disable all add-ons:

  a. click the Start button.

  b. click on all programs, accessories, and click on system tools.

  c. click on Internet Explorer (No Add-ons).

  If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

   

   

  Method 2: Optimize Internet Explorer and check.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  For more information, visit the following link.

  Sign in using

  http://zone.MSN.com/en/support/article/supporthubsignin

   

   

  If the problem persists, feel free to let us know. It is our pleasure to be of service.

• Database MS SQL Server with AIX server connectivity issues

  Hi all

  I am confronted with the below with the AIX server connectivity issues.

  Operating system: AIX 64 bit

  DB: SQL Server 2005

  EPM Version: Hyperion 11.1.1.4

  Error creating socket to host and port 1433. Reason: Connection timed out: could be due to an invalid address

  Tired of Solution

  (1) checked the properties of TCP/IP, its permitted.

  (2) ping the source and target servers both ends all works fine

  (3) firewall is DISABLED in DB Server

  Hi all

  My apologies, its number of firewall & network. Resolved by the Unix administrator.

  Thank you

• SCSI local data store connectivity issues

  Hi all
  I installed the server ESXi 4.1 before six months. now, I've seen continuous events related to data store connectivity issues. I changed the SATA cable also, but it won't help. How can I fix this without interrupting the VMs.

  As ESXi before 5, it is located on the var

  You can find them easily by starting from the root directory of newspapers:

  var/log/messages of cat | grep vmkernel | less

• WLC 5508 internal DHCP server issues

  Hello

  I'm hoping to get your comments around the issues of dhcp, I faced with two centrally switched Wireless LAN. I have attempted to explain the installation and the problems below and would be grateful if anyone can suggest a solution for the problems I am facing:

  The configuration is the following:

  -J' have a WLC 5508, which has been configured with 4 SSID, of which 2 are the Central authentication and commissioning.
  -J' have a LWAP connected to the WLC in HREAP mode.
  -WLC is configured as a DHCP server for clients that connect to the SSID "Guest." For the rest, I'm on external dhcp server.
  -Only one scope of comments Interface is configured on the WLC.

  Problems:

  1. as far as I know, to WLC serve internal dhcp server, it is mandatory to have the proxy enabled, but the Clients connecting to 'Internet' SSID are

  Unable to get an external dhcp server ip address, if the proxy dhcp is enabled on the WLC. If I disable the proxy, everything works fine.

  2 DHCP does not release the ip addresses assigned to clients, even after that that they are connected.

  3. If a machine that has previously been connected to "Guest" SSID connects to the 'Internet' SSID, he asks the same ip address, he was charged by the WLC assigned under "Guest", it gets the tag with the Vlan configured on the management interface.

  The controller output *.

  (Cisco Controller) > show sysinfo

  Name of the manufacturer... Cisco Systems Inc..
  Product name... Cisco controller
  Version of the product... 7.0.116.0
  Bootloader Version... 1.0.1
  Retrieving Image Version field... 6.0.182.0
  Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27
  Build Type....................................... DATA + WPS, LDPE

  (Cisco Controller) > show interface summary

  Name interface Vlan Id IP port address Type Ap Mgr. Gu

  EST
  -------------------------------- ---- -------- --------------- ------- ------ --
  1 301 10.255.255.30 dynamic guest no no
  Management 1 100 172.17.1.30 static yes no

  service-port s/o s/o 192.168.0.1 static no no
  n/a n/a 10.0.0.1 no nonstatic virtual

  (Cisco Controller) > show wlan summary

  Number of wireless LANs... 4

  Profile WIFI WLAN ID name / name of the SSID status Interface
  -------  -------------------------------------  --------  --------------------
  1 active LAN management
  2 active Internet management
  3 active active management management
  4 comments comments enabled

  (Cisco Controller) > show dhcp detailed comments

  Scope: comments

  Enabled.......................................... Yes
  Lease Time....................................... 86400 (1 day)
  Pool Start....................................... 10.255.255.31
  Pool End......................................... 10.255.255.254
  Network.......................................... 10.255.255.0
  Netmask.......................................... 255.255.255.0
  Default routers... 10.255.255.1 0.0.0.0 0.0.0.0
  DNS Domain.......................................
  DNS.............................................. 8.8.8.8 8.8.4.4 0.0.0.0
  NetBIOS name servers... 0.0.0.0 0.0.0.0 0.0.0.0

  (Cisco Controller) > show detailed interface management

  ... Management interface
  MAC address... e8:b7:48:9 b: 84:20
  IP Address....................................... 172.17.1.30
  IP Netmask....................................... 255.255.255.0
  IP Gateway....................................... 172.17.1.1
  State IP NAT outside... People with disabilities
  External IP NAT... 0.0.0.0
  VLAN............................................. 100
  Quarantine-vlan... 0
  Active physical Port... 1
  The primary physical Port... 1
  Port of physical backup... Not configured
  Primary DHCP server... 172.30.50.1
  Secondary DHCP server... Not configured
  Option DHCP 82... People with disabilities
  ACL.............................................. Not configured
  AP Manager....................................... Yes
  Comments interface... NO.
  L2 multicast... Activated

  (Cisco Controller) > show detailed comments from interface

  Interface name... Comments
  MAC address... e8:b7:48:9 b: 84:24
  IP Address....................................... 10.255.255.30
  IP Netmask....................................... 255.255.255.0
  IP Gateway....................................... 10.255.255.1
  State IP NAT outside... People with disabilities
  External IP NAT... 0.0.0.0
  VLAN............................................. 301
  Quarantine-vlan... 0
  Active physical Port... 1
  The primary physical Port... 1
  Port of physical backup... Not configured
  Primary DHCP server... Not configured
  Secondary DHCP server... Not configured
  Option DHCP 82... People with disabilities
  ACL.............................................. Not configured
  AP Manager....................................... NO.
  Comments interface... NO.
  L2 multicast... Activated

  (Cisco Controller) > show dhcp leases

  IP MAC remaining rental period
  00:21: 6a: 9 c: 03:04 10.255.255.46 23 hours, 52 minutes, 42 seconds< lease="" remains="" even="" when="" the="" client="" is="">

  Example of customer connected to the Vlan right with an ip address from the incorrect interface. *************

  (Cisco Controller) > show customer detail 00:21: 6a: 9 c: 03:04
  MAC address of the client... 00:21: 6a: 9 c: 03:04
  User name of the client... N/A
  AP MAC address... a0:cf:5 b: 00:49:c0
  AP Name.......................................... mel
  Status of the client... Associates
  Customer of the NAC OOB State... Access
  Wireless LAN Id... 2<   'internet'="">
  BSSID... a0:cf:5 b: 00:49: this
  Connected to... dry 319
  Channel.......................................... 36
  IP Address....................................... 10.255.255.46< ip="" address="" assigned="" from="" the="" 'guest'="" interface="" or="" dhcp="" scope="" on="" the="">
  Association ID... 1
  Authentication algorithm... Open System
  Reason code... 1
  Status code... 0
  Session timeout... 1800
  Client CCX version... 4
  Version of E2E customer... 1
  QoS Level........................................ Silver
  Beacon priority P 802,1... disabled
  Support WMM... Activated
  Power Save....................................... OFF
  State of mobility... Local
  County of movement mobility... 0
  Complete security policy... Yes
  State Policy Manager... RUN
  Policy Manager rule created... Yes
  ACL name... no
  Status to apply ACL... Not available
  Type of strategy... N/A
  Encryption Cipher... None
  Protection management framework... NO.
  EAP Type......................................... Unknown
  Data HARVEST-H switching... Central
  H - HARVEST authentication... Central
  Management of the interface...
  VLAN............................................. 100< right="">
  Quarantine VLAN... 0
  Access VIRTUAL LAN... 100

  Well it's good news. At least you have to operate.

  Thank you

  Scott Fella

  Sent from my iPhone

• Airport connection issues

  I have an Airport Extreme, connected to a Comcast Modem. I extended my system with an Airport Express and Airport Time Capsule. I use a DHCP/Nat # 192.168.1 to system configuration and each unit module is defined to EXTEND the current system. When I use DHCP to obtain the IP address, the default value of the units to a 172.le addressing scheme. In order to get a good address 192, I need to manually insert the ip address, the subtask and DNS servers. Why create it incorrect IPv4 addressing scheme is displayed?

  What is the brand and model of your modem provided by Comcast? How about you, the exact model of each of your Apple base stations numbers? Extend the two base stations using wired or wireless to extend AirPort Extreme?

• PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

  Hello
  Member of the Community/Forum
  
  Model name - laptop Hp Pavilion 15 (15-p001TX)
  Questions - Brodcomm 802.11n wireless adapter not Worming.
  
  Problems-
  I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.
  
  Problems are the following:-

  1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.
  
  to re work I need for wtich forcefully from the power button.
  
  2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.
  
  Here are the ways I've tried.
  
  1. that tick managent of power, I have UN ticked (from PROPERTIES)
  
  2. using the CMD, I reset
  
  3. I DID cofig automatic Wlan disable (and put it on startup)
  
  4. update the drivers to the latest Version.
  
  5 install the latest drivers from the HP website brodcomm or even other Web sites.
  
  No the above to help me out.
  
  3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.
  
  Please please suggest the Suggestion and the ways out sorting valueable.
  
  He's really frustrated now, I do not understand what are the ways to my wifi on working condition.
  
  Thank you
  
  Kind regards

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Aditya Rai

  Aditya Rai

  Hello @adityarai82,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

  Try to review these steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Envy TS m6-k015dx: HP Envy Bluetooth Windows 10 connectivity issues

  I've upgraded to Windows 10 recently (even if she will be as a downgrade) and have experienced problems with the wireless and bluetooth connectivity. specifically, I can't keep a solid connection on any wireless network while my bluetooth is turned on.

  He'll keep disconnection, and when he says that I have a stable connection I don't always get all internet.  He said that there is a problem of DNS probe.

  As well as wireless issue while bluetooth is turned on, I also had problems with the connection to an audio device via bluetooth.  I recently received Coulax QX8 bluetooth headphones and they connect on my phone (iPhone 6s), but when I try and connect to it on my laptop, it is not figure it out.  I activated the devices to the discovery of the notebook in the settings, but I still don't see it appear.  Help, please.

  And before all the messages about drivers, YES, I update my bluetooth and Wifi drivers, through both the HP Support help and directly by the driver and the Device Manager.

  Current drivers

  Bluetooth: Intel Wireless Bluetooth, version 18.1.1525.1445

  Wireless: Intel Centrino Wireless-N 2230, version 15.18.0.1

  Please let me know if bluetooth or wireless number, or if it's just with Windows 10 on this product!

  Hello @sambody47,

  Thanks for the quick response!

  Keep your eyes on Windows Update.  If ever the drivers become available for your product, it will be pushed through this program.  You can check this site for the drivers as well:

  HP products - where to find Windows 10 drivers and software for my model?

  Because Windows 10 drivers are not yet available for your product, on the site of HP; You can try to use the solutions on this site to work around the problem.  Please let me know the results:

  How to: install and update drivers in Windows 10

  If you're still having problems, try to use back to a previous generation option, in your system settings: HP Notebook PC - upgrade to Windows 10

  Remember that this feature is available only for 28 days, after the installation of Windows 10.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Satellite Pro L550 - Realtek RTL8191SE Wlan connection issues

  Hello

  Affected by a big problem with my WLAN connection which is ongoing for about a month.
  I have problems with a very inconsistent connection.

  To start, turn on the laptop of its climate 50-50 I'll successfully connect to my internet. Once connected I constantly disconnect and reconnect, never reached a point of stability, as long as possible without hitch is about 30 minutes, and after this point it will repeat the process above in one or two minutes, making it impossible internet usage.

  After following various checks, I can confirm that this is NOT a router problem:

  -Several other devices around the home connect without the same problem
  -Have you tried the reset and restarted both modem and router without result
  -Used new Ethernet cables and checked the other son of bends or damage
  -Tried to change the frequency of router and the channel for better connectivity with no result
  -Tried to change the location of the router, the closest pass to the laptop for a greater power of the signal without any positive results

  Whenever he logs off, I go through a laborious task repetitive troubleshooting and although sometimes it solves the problem, so that it does only temporarily.

  Updates on computer and controls are as follows:

  -Install the latest drivers for my network card
  -The latest version of the BIOS for my laptop
  -J' tried UN-installing software and remove driver in Device Manager in the case of a corrupted driver, after re-booting works temporarily and then breaks down in the first 5 minutes
  -Tried using windows troubleshooting, which sometimes displays a message on my gateway by default, I don't know what that means well as
  -Tried to use other means of verification, connectivity doctor etc., no results
  -Tried to reset network cards
  -Tried to use an earlier version of the network card to check if the new drivers were the problem - no result
  -Tried resetting IP addresses IP conflict with other devices in the House, no results
  -Played hundreds of reboots

  I would like to point out that when using the LAN on my laptop my connection is quite well and I have the experience without interruption, I have also contacted my ISP to ask if there is ongoing network maintenance tasks and check if the internet I receive is consistent.

  Computer laptop specifications: -.

  Toshiba Satellite Pro L550
  Network card: Realtek RTL8191SE
  OS: Windows 7 x32bit

  The whole process is infuriating and I am at my wits end as to what to do, is, fuck my network card?

  NB:

  This could be a problem as the dust inside my computer laptop on the map, causing interference?
  The problem is much more prolific when I use Skype - might be a bandwidth issue?

  Open to the suggestions of many, and any help will be appreciated.

  Thank you.

  And all this occur with clean Windows 7 preinstalled that you got with your laptop (factory settings)?

• WLAN connectivity issues

  Hello

  First: sorry for my bad English.

  Now to the problem:
  Most of the time my moms brand new Satellite P200 with Atheros 5007 shows "no network found/available", even if there is less than 4 or 5 other neighbours and of course his own. Only 1 of 5 attempts is successful, and it automatically gets connected to the internet.

  2 of 5 attempts showed? No network found/available"and nothing changes even after 15 minutes of waiting. She needs to restart the laptop. 2 of 5 attempts shows only 1 neighboring network (even if there are 4 or 5) but not his own, BUT after 3-12 minutes of waiting all of a sudden all incl. networks. his own are displayed.

  After internet disconnection (if she had a prior connection) it especially does not get a poster network if she tries to enter the internet once again, and she needs to restart the laptop. 2 driver for the Atheros updates do not change this behavior, now it's the 7.3.1.109.

  Encrypted or not, makes no difference, DHCP on or not makes no difference, SSID on or not...
  The neighbors are using channels 1,6,8 and we went from 9 to 11. Sound test with another router instead of my laptop makes no difference. Test my laptop in its place is 100% success, whenever I am connected to the router and internet.
  Test of a d-link-USB-WLAN-stick on his Toshiba is 100% success

  I don't think it's a hardware failure, because sometimes it works.
  What of the you think, to the where do I look or what should I do to fix this problem?

  Thanks in advance

  Toshiba provides only the version of BIOS-WINNER that should be run from the operating system.
  The update of the BIOS should generally run smoothly without any problem.
  But we must choose the good BIOS and the good BIOS update procedure.

• R7000 - wired connection slow then fast

  Hello

  I'm having a problem with the R7000 - when doing a speed test, connection is 0.21 MB/s, then after a few seconds it seems to speed up to good speed 150Mbps. I had the ISP outside to check the modem and everything seems fine, speeds are ok, when you use the ISP with built-in modem router.

  Just wiondering if it's a common problem or if there is a parameter that is the cause.

  Neil.

  Things to check:

  Cabling between the modem and the router - should be at least CAT5e.

  If QoS is enabled. Disable and try your test again.

  If you have recently updated the firmware on the 7000 and reset factory default, it would be a good idea to do so.

  You have fulfilled your ISP modem? If you use the 7000 as your main router, you should do, if it's a router / modem combo.