Radio signal does not, but the switch is on.

Similar Questions

• No speakers on computer does not, but the head phones are for HP Pavilion Dv7

  The speakers on my Hp Pavilion DV7 - 3164cl have stopped working. The only time sound works when I use headphones or connect the computer to my tv. I have already uninstalled and reinstalled the IDT High Definition Audio Codec (Version 6.1.6345.0 driver) and the device high definition Audio ATI (Version 5.0.7000.6 driver) to my computer via the Device Manager. I've recently updated the HP support program for my computer, but even when I tried to do a system restore it does not solve the problem.  I'm starting to think it could be a problem of faulty wiring, but I don't know how to fix this. Any ideas?

  My operating system is Windows 7 home operating system

  Your time is appreciated.

  Speakers required thank you for replacement of assistance for everyone

• Equium A200-1VO - touchpad does not but the fact external mouse

  I had a problem with my hard drive does not it just happened overnight so I replaced the hard drive no problem and rebooted the system.
  Everything is ok but the touchpad does not work.
  I tried FN + F9 it's ok, I have updated the touchpad program still does not.

  Help, please!

  XP or Vista?

  Did you use a Toshiba Recovery disk to install Windows? Or a generic version of the street of Windows?

  Maybe you should go to the Toshiba website and download the drivers.

• USB and ext.hd does not, but the mouse is?

  Windows Edition home premium 2
  Acer aspire 5930 portable

  A few days ago I tried to connect an old usb that worked for 2 weeks with no problems... The computer says there was an error on the disk, then windows Explorer froze and had to reboot.  Later I "fixed" error, after many gels, but still the usb wouldn't work.  I ended up formatting the disk.  Although a still takes a long time to open and recognize the usb, windows Explorer.  My mouse is very well (connected to a port targus 4usb thing), my printer is fine.  All my usb and hard drives refuse to connect to the computer.  USB device manager says they are all "unrecognized devices" yet less than a week ago that they were all works well without any problem.

  Usb had some .f90 (fortran) files relating to certain University evaluations, excel (including some activated macro for vma), power point, word, and pdf files.
  It seems that all of my USB with fortran files most of the problems, but they all had some one way or another.

  before you say MY FILES to UPDATE... ILS ALL ARE updated TO THE FULL they may be... This is what I did the last few days.  In addition, as I'm using a proxy, this auditor boring device DOES NOT WORK on my computer.

  Also when I try to format or delete the files from fortran, it comes up with the error:
  0x8007045D i/o device error
  any ideas?

  Thanks in advance

  Hi Alexander,.

  1. what format did you try? What is a NTFS format?

  Since it is a recent issue, you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• check the radio button does not submit the form?

  Hello

  
  

  Your name:
  E-mail address:
  Contact no.:
  Topic:	Appointment Opening hours Products Other
  Message:
  	Enter the above code here: Can not read the image? Click here to refresh

  
  

  I have a form on my site,

  and all his work.

  But I noticed that the information of the radio button

  is not sent?

  may an advise why?

  Also, can someone suggest how I can configure the name where the email?

  as when the email is downloaded, it come with my Web Host/Server name?

  Thank you

  < Center > < form name = 'contact' method = "POST" action = "form_process.php" >

  < table width = "306" border = "0" cellpadding = "0" cellspacing = "0" >

  < b >

  < td width = "93" height = "28" valign = "top" > your name: < table >

  < td width = "213" > < input name = "name" type = "text" >

  < table >

  < /tr >

  < b >

  < td height = "28" valign = "top" > Correo electronico: < table >

  < td > < input name = "email" type = "text" > < table >

  < /tr >

  < b >

  < td height = "28" valign = "top" > Contact No.: < table >

  < td > < input name = "contact" type = "text" size = "24" > < table >

  < /tr >

  < b >

  < td height = "85" valign = "top" > subject: < table >

  < td > < label > < input name = "category" type = "radio" value = "Appointment" / > appointment < / label > < br / >

  < label > < input name = "category" type = "radio" value = "Schedule" / > opening hours < / label > < br / >

  < label > < input name = "category" type = "radio" value = "Products" / > Products < / label > < br / >

  < label > < input name = "category" type = "radio" value = "Other" / > other < / label > < table > < /tr >

  < td height = "28" valign = "top" > Message: < table >

  < td > < textarea name = "message" = "24" cols rows = "5" > < / textarea > < table >

  < /tr >

  < tr > < td > < table > < td height = "85" valign = "top" >

  < br / > < img src = "captcha_code_file.php? rand = <?" PHP echo rand();? ' > '.

  ID = "captchaimg" >

  < br / > < label for 'message' = > enter the above code here: < / label >

  < br / > < input id = "6_letters_code" name = "6_letters_code" type = "text" >

  < br / > < small > can not read the image? Click on < a href = "" javascript: refreshCaptcha(); "> here < /a > to update < / small >"

  < table > < /tr >

  < b >

  < td > < table >

  < br / > < td valign = "top" align = "center" > < input type = "submit" value = "Submit" name = "submit" > < table >

  < /tr >

  < /table >

  < / form > < / center > < br / > < table >

  OK - I see what is happening. The script that determines the content of captcha also sets the session variable. To read this variable on the processing page, you need to enable sessions there too. -Change

  If (isset($_POST['submit']))

  on this subject.

  {if (! isset($_SESSION))}

  session_start();

  }

  If (isset($_POST['submit']))

  If there is an error of Captcha, you will also need to print that the visitor sees an indication that they do not have this right. There are several ways to do it, but probably the easiest is just to send them to the test to white form with an error message, so change that-

  Header ('Location: thank_you.html "");

  }

  on this subject.

  Header ('Location: thank_you.html "");

  } else {header('Location:captcha_error.html') ;}

  then create the captcha_error.html page that explains what that went wrong, with a link to the page of the form.

  See if that helps.

• X 200 speakers does not, but the headphones work

  The headset works but the computer speakers no longer work. I don't know why, all of a sudden, it stopped working. I tried searching forums and installed the latest drivers. I don't know why it doesn't work anymore. Help, please.

  Understood the problem and have a solution for this. (You mind I've updated to the latest drivers first!)

  Basically, the new driver has more than one audio output option and you must activate both of them.

  Here's how I did it,

  Control Panel => SMART AUDIO

  On the background, select the Audio DIRECTOR. From there, you will have 2 options to select among the CLASSICS (plays the sound only through headphones) and MULTISTREAMING (plays the sound to the speakers). I just changed the CLASSIC for MULTISTREAMING option and it works. After that, the volume mixer in the AUDIO SMART tab will have options to control the speaker and headset independently.

  See you soon!

• Satellite L850 - headphones does not, but the speakers do

  Yesterday I was watching Housos, and suddenly my audio to cancel on my headphones,
  I have out them to see what is going on and the speakers work perfectly.

  so I try to mud autour with the cord as normally (the headphone is weird, only allows me to use the right side of the headset, no matter than the ones I use)

  so I rebooted my laptop, used different headphones and tried to look around the audio sound/material.

  Can someone help me please, I need to use right now and don't know what to do: L

  Hello

  You said you used different headphones so I guess that it s not a malfunction of the headphones.
  Can you confirm this?

  Usually the first check should be done in sign of-> sound-> the Read tab

  After connecting the headset, with an additional inscription (helmet) should appear and you should be able to mark this as default device.

  Where this is not possible, you should try something related to audio driver.
  First go to Device Manager and expand the area called + sound and video games controller. +

  You will find two entries. Remove it from the list.
  Then go to devices of zone system. Search for high-definition Audio and delete also.
  Now its time to restart the laptop.

  When the system restarts, Windows OS would recognize deleted devices.
  Wait that the devices have been recognized.
  Then plug in the headphones and check if you can use it properly.

• All-in-one Photosmart HP 7510: Photosmart 7510 - black ink cartridge print does not, but the tests are very well

  All the test prints are very good.  I have cleaned the print heads, broken cartridges.  I just replaced all the yesterday.

  Today, I can't print black.  The documents are great dimmed or blank pages come out.  I use a MacBook 2007, 10.6.8.  What else do you need to know?

  Thanks in advance!

  Hey @jas493,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I see you have a recurring problem of print quality with your HP Photosmart 7510 e-all-in-one printer.  I want to help you with this.

  What you describe, it seems that you tried all HP recommended troubleshooting steps.  Fortunately, given that your printer has a removable printhead, there are some other steps you can take to address the issue:

  Check the status of print head warranty

   

• touchscreen not working not but the digitizer pen is for x 201

  x 201 3093-a15 touch does not but the digitizer pen is but you can see it touch the hardware on the Device Manager and then you go to the control panel pen tablet properties are and click on him and say touch in water from the tap also same Pen and touch too touch does not work but feather even turn round screen to see to see if it works , but nothing happens. I'm using a windows 7 with i7 and 1 TB and 8 GB of ram. Thank you for reading this hope of getting help with this

  In my opinion, they all load the multitouch drivers. You can try to get a copy of moninfo (free). It can give you the FRU, or you could look here:

  http://support.Lenovo.com/en_US/product-and-parts/partsLookup.page

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox

• Wireless on HP Pavilion dv8013cl switch does not illuminate the blue light.

  Months ago I made a configuration change that disabled the switch, but I don't remember what I did.

  Now, I want to activate the wireless switch, but don't know what software it controls.

  I reinstalled the wireless hardware card and reinstalled the wireless driver, but the switch still does not work.

  Any ideas?

  Problem solved!

  I found a solution and it worked.

  Simply uninstall HP Wireless Assistant, then restart.

  I used the Windows Add / Remove Programs Control Panel to remove.

  Because it worked after restart, I did not reinstall the HP Wireless Assistant software.

  I can do it at a later date and download to my computer is

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&lang=en&product=1154655

  Text to the URL http://www.wirelessforums.org/network-troubleshooting/hp-wireless-assistant-issues-35150.html where I found the solution:

  "I found a solution. The problem is with your Hp wireless assistant. This software is used to toggle the wireless through the switch outside of your computer. After uninstalling Hp wireless assistant-problem solved. When I rebooted my computer and without wire was back, I went to hp.com and reinstalled the wireless assistant. This solution lasted a week until it happens again, and the same solution worked. I intend to redo these steps until I can find a new version of the Hp wireless assistant. However if you choose, you can run your network wireless Hp wireless assistant, but your outside knob does not work. »

• BlackBerry BB Z30 Z30 connects to non-existent WiFi signal and does not accept the real

  I just changed wifi of our House 'Superfast' (100 Mb/s) because of problems with access around the House. I changed to 2G and the names of the signals of 5G from those used previously, xxx - 2 G and 5 G - xxx to xxx2 - 2 and xxx2 - 5G.

  However Z30, by listing the networks begins with

  Connected to xxx - 2 G, showing three bars and saying "Login to connect to the Internet." but I can not because it does not accept the password.

  Z30 then begins the list of available networks

  XXX2 - 5G, showing the four bars

  XXX2 - 2G, also four bars, saying "saved".

  at the bottom of the list is

  XXX - 2 G, three bars and saying: "selected."

  How do I remove a network as xxx - 2 G which doesn't exist or doesn't want to, because it blocks the ability to connect to one that exists and IS being sought?

  I can connect to xxx2 - 2G (new 'Saved' network), but after a while (maybe 10 minutes) the phone slides into the ghost...

  I would of course prefer actually to connect to xxx2 - 5 G - but this is not spared: whenever I have it try, ater entered the password (and getting a tick) I said - ' unable to add profile: another profile uses this SSID.» (WPS does not anyway I tried). Later: after having tried this ten or more times, sometimes xxx2 - 5G lists as saved (but usually does not), but is still inaccessible.

  How can I get Z30 to save a network / signal / profile - and use - it says is available and is looking?

  I'm an old man without a lot of hair left - and I'm pulling that very quickly...

  Cheers - Eric

  Eric, open your settings > Wifi.
  At the bottom of this screen type saved.
  Search for unwanted sources wifi saved old and press on & hold on this name to remove the pop up right.

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I put my yahoo homepage, but every time I open mozilla home page is webssearches I reset firefox, but it does not solve the problem, what to do now?

  My homepage is set to yahoo, but mozilla opens with http://istart.webssearches.com as start page. Same reset does not solve the problem. I think that I have installed a software that installed this. My default search engine is Google. Kindly help me, is there something to do in all: config?

  See this tutorial - http://malwaretips.com/blogs/istart-webssearches-com-removal/

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/