Rainbow color Photoshop problem

Similar Questions

• Neophyte color management problems

  Neophyte color management problem:

  Image rendered PS colors do not match monitor or images rendered with other applications.

  Recall facts: using MacBook Pro retina with NVIDIA GeForce GT M 750 (calibrated in sRGB with ColorMunki Display software), OSX 10.95, PS CS5 and new external NEC PA272 (material calibrated to native with calibrator Spectraview II & NEC gamut) connected with the mini-displayport cable. Although slightly different due to different Mac and NEC display gammuts, a sample JPEG on Mac seems somewhat near NEC as desktop BG on respective monitors images and seen with the OSX Preview app on a monitor. AND the same image in PS when the image PS window is MOVED to NEC, is STILL, UNTIL the mouse is released. Then the image in the PS on NEC image window moves with a glance off the coast of colors. I am aware that the Mac display is sRGB and the NEC a range wide screen, and that this image of the example is a JPEG to sRGB, but I wanted an image that would be displayed on two monitors, with different applications, including the Psalm but it's the same thing when the main PSD used to create the JPEG format is loaded in PS then MOVED over to the NEC. Tried to play with management PS colors and corresponding attempt to different

  Profiles, but no luck. Tried the General searches on Google, but I'm lost. Any suggestions where to start to fix this problem? Thank you!

  The standard behavior in a multi-screen configuration is that Photoshop uses other operating system display profile offers upward so that the display - up to what the image window crosses the line to halfway between them. Then he goes to use the other profile.

  The shift-on-drop thing indicates a video card problem. That's how OpenGL works in Photoshop, when you drag an OpenGL image is temporarily suspended, and then snaps back on when you file.

  So I would try to disable the GPU in the PS preferences or set it to the basic mode. This shifts all display color to the CPU. Then wait for the next update of video driver from Apple.

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• HP Deskjet 3050 tri color cartridge problem

  I bought genuine HP ink cartridges to replace those I used quickly to the top. That black worked fine, but when I later put the tri color in the 'tri color cartridge problem' message came, and when I tried to print it stated that he was "damaged or did not. I tried to re-insertion and carefully clean the copper part without touching where the ink out. I don't really know what else to try, if it's just a faulty cartridge is there a way I can get a refund or a free replacement because it was pretty expensive? Thank you.

  Hi dsavz,

  I hope you were able to print correctly after changing the cartridge.

  Usually they could be exchanged for another cartridge in case of warranty.

  You can try to get back to the store to see if they'll exchange it for you.

  Because it was outdated at the time of purchase.  I would like to give it a try.

  Good day!

• What is the best 'color settings' for documents 4 colors Photoshop 9.0 for eventual printing on a printer? Thanx

  What is the best 'color settings' for documents 4 colors Photoshop 9.0 for eventual printing on a printer? Thank you, Scott

  The 'best' color settings are profile and end points specified by your lithographer. You can see that the work will be produced in CMYK mode, it can specify a RGB. (One of the reasons why it might ask for an RGB file and perform the conversion itself is so that it can prevent its competitors its CMYK settings that apply to the GCR, generation of black [ramp] and limit of total ink regarding specific paper.) Its recommendation may also vary depending on your choice of paper and the surface of the paper. If the choice of the particular lithographer cannot be done at this time, it is generally acceptable to provide the Adobe RGB file with the default settings of Photoshop.

• Photoshop cs5 printwindow color printing problem

  The colors in the print window of are different with a photo of basic, and if I start to print it print the right color.

  The printer is gecallibreerd and if was no problem so far. The wrong color is still red.

  You can try the solutions mentioned here. Troubleshooting printing problems. Photoshop

  ~ David

• Photoshop color settings problem

  I have an unusual problem with the color settings in Photoshop at the moment and need help setting/calibration of colors in Photoshop.  Attached are 2 images of the question.  Basically, the question is that the recorded files look quite different from what they were when doing in Photoshop.  However, if I take this picture in Photoshop, it looks right again, so the question is obviously inside Photoshop.

  

  On the top is a screenshot of splitting the saved file as displayed in a web browser, the default value (half of the image on the left), then a screenshot of the same image as it appears in Photoshop (right half).  The image on the bottom is the same screenshot of the two visible at the same time with the same screen cap program.  As mentioned earlier, if I take the cap of the display of the image in the web browser, and then open in Photoshop, it corresponds to the original very well.  I have messed around with (shift + ctrl + K) color settings, but could not do anything remotely as I see outside of Photoshop.  Anyone has any ideas on what I need to tweak to make the color/contrast/saturation/whatever Photoshop look more like what we see in the web browser while I'm working on a project?

  I am currently using Photoshop CS4 with the latest updates.  Thanks for any help!

  dgolberg

  It looks like your browser and Photoshop are displaying the same image in different color spaces.

  You should know in what color space the image is displayed in each program.

  You don't say anything about your browser, so I can't say but in Photoshop, the color of an image space is obtained in the following order of priority:
  1. from choice in the menu Format to test when the test colors is enabled.
  2. when the test colors is disabled, the embedded profile.
  3. when the test colors is off and when the image is without a color profile (unidentified) of the color selected in the color settings workspace.

  This image shows how to check the color of the image profile.

  

  What happens when you choose View > proof colors, then display > test format > Monitor RGB? Is the browser the image in Photoshop?

• color management problem

  I use Win 7 ultimate on a Lenovo W700 laptop. I use Huey Pro as a calibrator screen. I found on Vista 64 that wee badly in programs, but to the right of the screen colors. The reds have almost disappeared and the contrast is way down. I upgraded to Win 7 64 and the same is true. Fund colors are normal, but in programs like preview Windows, Capture One, Photoshop CS 4 or 5 and others, the reds disappear and the other changes are to see. The differences are huge. Lenovo has just checked the Nvidia video card and the motherboard. All the software you and the drivers are up to date.

  In Capture One, the RAW image converter, I can see what is happening. A folder of photos will load and I can see them coming. Initially, the colors are OK, then after 3 seconds, another profile is applied on the photos one by one and colors are now far as described.

  Lenovo and Adobe so far have no solution. It seems that this issue has been around since Vista, but has not yet been addressed. Actually wondering what photographers like me have made, that the photos cannot be changed on my computer. On my last shoot, I had to borrow an Apple and treat it...

  How can I get this change of profile to stop? Again, the office is very good and if I find a photo on the web is good, but when I use my own software as above a profile is visibly changed.

  I'll be very grateful if there is solution!

  Thank you, steve

  I first noticed the problem with vista 64. My pictures came out gray and green. Attempt to fix, it would add color to the rear. Others see you so too much color and contrast. I thought it was my conversion to srgb color space, or something. I called lenovo and updated for win 7 64, but he looked the same. I went on a shoot in Glacier national park this month with three other photographers using apple computers and we noticed that the colors were missing on mine, if we shot the same object. I put my files on their computers and they seemed fine. We saw the red and other colors were very good on my desk or on a thumbnail of a photo on the desk, but as soon as I opened the photo the colors disappear except Green and gray with little left. It does not matter that I opened the photo with, including windows or third-party programs. If I go on a website and display a picture on a forum, the colors are fine for me. The drivers are all changed with no difference. I will try to change users and see if it helps. Again, I can actually watch get in capture one if I open a large file. The colors are very well, so they move suddenly after a few seconds. In the other, faster software, the colors are not from the moment wherever I see them. Even if the calibration software thinks he works and the profile can be selected by default in the Control Panel, there is no change after calibration of the screen. I can even uninstall Huey pro and it does not matter. I tried to calibrate it manually and the colors are there on the calibration screen, but bad back in programs again, as if I'm only to calibrate the office. Hope this helps and I'll try to change users Steve

• Selector color Photoshop suddenly does not work

  Hello

  I never had this problem before. I worked on a project in Photoshop, and for some reason, he now works only in shades of gray. When I used the color picker to change the color, it does not work.  I know, don't forget to do anything different to make it work only in shades of gray, but I can't seem to understand how to switch color mode and I'm in the middle of an important project. Anyone know how to fix this?

  Penny Jones

  [email protected]

  Look at the Document tab at the top. RGB/8 should be the norm.  If you somehow typed 'q' on your keyboard, then it would read

  'Mask quick/8' and the color picker would not choose a color. Press q for back RGB.

  Always check the Document tab, it will clue you into what you have selected. He says "Layer 0, layer mask/8" If you have selected a layer mask.

  Finally you may have selected a color channel and it would read layer 0, blue/8.  Cmd/Ctrl 2 can go back you to RGB.

• LR3 - edit in Photoshop problem

  I'm pretty new to Lightroom, so I checked the previous messages and reading the manuals, but I can't find an answer to my problem.

  I have LR3 and CS5 using the Prophoto color profile on a Windows 7 system. I always shoot RAW (NEF) and use generally two LR3 and CS5 to process an image.

  The question I have is after the image processing in LR3, I use Photo/edit in Photoshop, then, for the image to open it in CS5, make a couple of other methods (crop & clone tool) and then 'save' (not ' Save as '). When I discovered the image of 'Change' in LR3 initial settings have changed considerably. The image is also slightly darker. I've also experimented in the accomplishment of any process in CS5 by going directly to 'save', but the same problems prevail.

  Is an example of the difference in parameters:

  LR3 parameters; Tint + 10, exhibition - 0.24, recovery 46 filling L 3, Black 7.

  Edit version shows; Hue + 1, exhibition - 0.41, exit 23, filling L 0, black 5.

  Can someone give me please an answer as to why the edit back version settings are not the same as those indicated in the first transformed RAW version which also leads to a darker picture?

  Howard

  What happens if reset you 'All development of default settings' in 'Preferences' 'Presets '?

  Frans

• Between 5.5 and CS4 color management problems

  I'm faced with a problem of color management and would be very grateful if someone could help me with that.

  I'm working to create in inDesign CS4 (6.0.6) and using my usual color management settings. I set up at the bridge in my CS4 and then use in InDesign, Photoshop and Illustrator. My settings are for jobs printed here in the United Kingdom, as follows:

  ---

  Workspaces

  RGB: Adobe RGB (1998)

  CMYK: Coated FOGRA39

  Color management policies

  RGB: Convert in the workspace

  CMYK: Convert in the workspace

  All three 'request when opening' checked

  ---

  Then I have a customer takes the file InDesign me, working there and returned to me to complete the development and execution of the high pdf - are for printing. It runs the latest InDesign CS5.5. I have him ordered to open InDesign and set his Edit > color... settings as follows without any open file is by default (am I do this bit correctly, it will work through all the files I send?):

  ---

  Workspaces

  RGB: Adobe RGB (1998)

  CMYK: Coated FOGRA39

  Color management policies

  RGB: Preserve embedded profiles

  CMYK: Preserve embedded profiles

  All three 'request when opening' checked.

  ---

  We did some testing and it doesn't work. It can open and work on the file ok and I see text changes she did without any problems.

  But when I analyze his record returned in detail, I can see that his record is now showing view > test format > Document CMYK - us Web Coated SWOP (v2)

  that suggests something coming to an end that applies US profile. I can change the configuration of evidence to work: Coated FOGRA39, but prefer the US profile never made his reappearance!

  My apologies if I'm doing a very basic error or errors here, but I usually have my color management just on my own system, so this is new territory for me. If anyone can help with what I should advise him to do to an end, I would be very grateful (she is about 300 miles north of England, so can't easily try the options on his MacBook Pro myself!)

  PS I also noticed that some items on the page have been modified when exporting .idml to 80% of transparency-enough to fool me for a while that the colors had changed over those too, when in fact I don't think that had anything to do with the issue of profile, probably just a bug between economy of process CS5.5?

  The easy way to get your colleague to use the settings that you want, is likely to create a .csf (color settings file) by pressing save button in the Edit > color... Settings dialog box, then having his press office in the same dialog box and selecting your .csf you sent.

• management of color printing problem

  (Sorry for the double post, given that this problem concerns both illustrator and photoshop and actually as indesign) to decided to repost it here in the forum of photoshop. Thanks for any help!)

  Hello! IM in charge of a large print in a University Lab. All the quad macpro running on 10.6.4 CS5 all updates.

  I have a major problem when all 3 printing CS5 applications: (being the worst) Illustrator, photoshop and indesign: each one produces a different impression, even if I use the SAME color management options (color management application using my own created color with an i-profile file - a tool of greta macbeath and using eye - one match 3). IM to print on a laser 7750gx XEROX printer. very cool printer never had problem with colors before with him, in any case, it was always the software part that was causing problems of color (as I suspect in this case).

  How can 3 software under the same application collection and the brand, using the same color profile and options (IDENTICAL! it is triple check all the options!) can produce 3 different prints when you print the same image (this is a color created in photoshop CS5 psd)?

  I remember having trouble like this when we arrived first CS1 in our lab, but not that bad... I checked everything... I really don't know how to solve this problem...

  the best setting so far is in Photoshop during the application manage the color and using my perceptual color profile file. best performance so far, not the best I've had in the past, CS4 was much more perfect with color management.

  I really need to find a solition because students are waiting for the color to be almost perfect (and they almost used CS4 in the past...

  Thank you for any advice and help!

  +

  Well, the code printing changed between CS4 and CS5. Among other things, we have refined the color management to follow the evolution of the requirements of the OS.

  It looks like check in the tool is a good step.

• Color fill problems

  Is anyone else having problems with the fill color of the cells?  Once I have fill a cell, I often can't change.  It is super glitchy.  It will allow me to change the color maybe once out of ten, or perhaps when I close and re-open the page... or maybe not at all. Curious to know if this is a bug known or just my bad luck.  Thank you!

  -BH

  Hi the Heeler border,

  How do you try to change your fillings? What Version of numbers do you run?

  I remember that in the past the Palace of color would work not all means the way I expected. I think I've changed my ways and I think that numbers can also work a little differently. I'm under 3.6.1 numbers in El Capitan.

  When I click in a cell to change the fill, if the color palate is open it is not related to the filling of this cell, even if it displays the same color. I need to reopen the mouth with the selected cell, or choose one of the colors in the Palace of popup.

  

  Quinn

• HP Color LaserJet CP1518ni - color alignment problem

  I'm having a problem with the alignment of different colors with my HP CP1518ni printer. Essentially colors don't print really in the same place, as the impression of Red (Magenta) is never aligned with black / yellow / Blue (Cyan) (so I can have the text in red with a black text shadow 0.5 to 1 mm below or blue with a red shadow of 0.5 to 1 mm at the top for example).

  Troubleshooting always just irritates me to calibrate, but I have many, many times over many months, calibrated and it does not help.

  Does anyone know of other solutions? Or should I buy a new Magenta cartridge and see what happens?

  My cartridges are:

  Magenta - CB543a

  Cyan - CB541a

  Yellow - CB542a

  Black - CB540a

  Make sure that you update to the latest Firmware.   HP recently released a newer version which helped with a more concise calibration with the alignment of color plan.   Many people have reported these problems solved after running the update.

  Update XP (English) can be found here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3422472#N841

• HP 1050: HP Deskjet 1050 tri color cartridge problem

  Ink light flashes on the left, Damaged cartridge Tri color 301 error message even if it worked before front end to win 10 Windows 7 upgrade.

  Software and drivers are correct, the HP Wizard, scanner works fine.

  Track cleaning and other instructions of finding of fault according to the HP links on this site, the problem remains.

  Replaced BOTH cartridges with new genuine HP 301, but again damaged reports tri color and should replace.

  Black prints prints alignment page in simple mode (with tri color removed), clean the head and all other operations ok

  I cleaned the contacts on the printer such as detailed in your links even still the remains of the fault.

  I'm avoiding buying more cartridges because I am sure that they are not at fault.

  Is this a known with victory 10 error? Help appreciated.

  On the phone HP supports in the United Kingdom.
  After looking online I can buy a refurbished for less than the cost of the new cartridges that I just bought.

  I think that this is the way to go, disposable printers. Thank you