HP Color LaserJet CP1518ni - color alignment problem

Similar Questions

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• Color Laserjet Cp1518ni alignment no longer work

  I have 2 x Color Laserjet CP1518ni for about three years now. Both printers do not calibrate corretly.

  I have problems with the logos of color printing. I now see magneta shadows as a result of misalignment.

  -J' have Windows 7, where the HP difficulty tools do not work. So I use the buttons on the printer

  -But also trying to calibrate with my laptop with Windows XP on it.

  -Installed new firmware, used each menu item I hoped that might have an effect.

  -Searched and searched on the internet, I found that nothing works.

  -Does someone have an idea to solve this problem?

  Hello

  Follow the instructions below to restore the default settings, and then test the print quality. Let me know what you find?

  http://support.HP.com/us-en/document/c01530973

• My HP Color LaserJet CP1518ni cannot print .pdf files

  Dear,

  I have a printing problem with my HP Color LaserJet CP1518ni (function USB my iMAC), since I installed the OSX Mavericks.

  Although my printer print word files, cannot print .pdf, even through the software PREVIEW or ACROBAT files.

  It gives the break signal... any solution about that?

  It is very annoying.

  Thanks in advance for your comments or help!

  Hi Kpanag

  I understand that you cannot print the PDF files from the upgrade to Maverick.

  I'll be happy to help you with this.

  I check and repair the authorization to drive on the Mac.
  Go on the hard drive of the Mac, applications, utilities, disk utility, click Mac hardrive left side, click on verify disk permissions, when it is finished click on repair disk permissions.
  (when it's over will show disk repair completed)

  Run the Apple updates also. (the Mac uses probably drivers 10.8)

  Make sure Acrobat is up-to-date.

  If you need more simply make assistance let me know.

• need instructions for changing the ITB on hp color laserjet cp1518ni

  need instructions for changing the ITB on hp color laserjet cp1518ni

  Hello the circus,

  Unfortunately the ITB - transfer belt doesn't seem to be a replaceable piece by customer. You will need to call our technical support at the 800-474-6836, and they can help you get this problem is resolved. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

  HP out of warranty of the Support Options for HP printers selection:
  http://goo.GL/WJ1Vb

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• HP Deskjet 3050 tri color cartridge problem

  I bought genuine HP ink cartridges to replace those I used quickly to the top. That black worked fine, but when I later put the tri color in the 'tri color cartridge problem' message came, and when I tried to print it stated that he was "damaged or did not. I tried to re-insertion and carefully clean the copper part without touching where the ink out. I don't really know what else to try, if it's just a faulty cartridge is there a way I can get a refund or a free replacement because it was pretty expensive? Thank you.

  Hi dsavz,

  I hope you were able to print correctly after changing the cartridge.

  Usually they could be exchanged for another cartridge in case of warranty.

  You can try to get back to the store to see if they'll exchange it for you.

  Because it was outdated at the time of purchase.  I would like to give it a try.

  Good day!

• Neophyte color management problems

  Neophyte color management problem:

  Image rendered PS colors do not match monitor or images rendered with other applications.

  Recall facts: using MacBook Pro retina with NVIDIA GeForce GT M 750 (calibrated in sRGB with ColorMunki Display software), OSX 10.95, PS CS5 and new external NEC PA272 (material calibrated to native with calibrator Spectraview II & NEC gamut) connected with the mini-displayport cable. Although slightly different due to different Mac and NEC display gammuts, a sample JPEG on Mac seems somewhat near NEC as desktop BG on respective monitors images and seen with the OSX Preview app on a monitor. AND the same image in PS when the image PS window is MOVED to NEC, is STILL, UNTIL the mouse is released. Then the image in the PS on NEC image window moves with a glance off the coast of colors. I am aware that the Mac display is sRGB and the NEC a range wide screen, and that this image of the example is a JPEG to sRGB, but I wanted an image that would be displayed on two monitors, with different applications, including the Psalm but it's the same thing when the main PSD used to create the JPEG format is loaded in PS then MOVED over to the NEC. Tried to play with management PS colors and corresponding attempt to different

  Profiles, but no luck. Tried the General searches on Google, but I'm lost. Any suggestions where to start to fix this problem? Thank you!

  The standard behavior in a multi-screen configuration is that Photoshop uses other operating system display profile offers upward so that the display - up to what the image window crosses the line to halfway between them. Then he goes to use the other profile.

  The shift-on-drop thing indicates a video card problem. That's how OpenGL works in Photoshop, when you drag an OpenGL image is temporarily suspended, and then snaps back on when you file.

  So I would try to disable the GPU in the PS preferences or set it to the basic mode. This shifts all display color to the CPU. Then wait for the next update of video driver from Apple.

• LaserJet CP1518ni on software Mac OS 10.7 for this printer is currently unavailable

  "I'm trying to install the HP Color LaserJet CP1518ni on Mac OS X 10.7.5 and get this error: the software for this printer is currently unavailable.

  Hi Lorel509,

  Welcome to the HP Forums!

  I understand that you try to install your CP1518ni LaserJet on Mac OS 10.7, and I'm happy to help with this installation problem!

  Please see the installation guide. OS X Lion v10.7: install and use the printer with Lion, because I think it will help.

  Hope this information helps you and have a great day!

• Drivers HP LaserJet CP1518ni for WIN7-64

  I have the color Laserjet CP1518ni printer when I had Win Vista-32 and it works beautifully. Recently, I upgraded my OS WIN7-64 and installed the drivers recommended from HP website. I installed the HP Universal PCL6 v5.6.0, but the printer is not recognized as color and prints only in black and white.

  When I restore the old driver 32-bit, I had on vista, it works in color but does not print on the web I get an error message on a competibility of 32 bits.

  Help, please.

  After carefully reviewing the download section for the printer from the HP web site, I found that there is an update of the firmware on this printer and CP1510 version. So I updated the firmware and now it works fine, so far.

  I guess that was the problem.

• HP LaserJet CP1518ni - wireless installation, will now in offline mode after reboot

  I just install my printer wireless via my router and everything was fine - test pages, etc. I rebooted and after reboot, I can't use the printer.  It is "offline." Turn everything off and then does not solve the problem.  The printer is a Laserjet CP1518ni.  It is connected to my router and two computers use wireless. Don't know what to do. Help! Why is it keeps working after the first reboot?

  You can run printing HP and doctor Scan, and it can help with this problem.
  http://goo.GL/u3jDE

  It can also be a firewall or an antivirus which blocks. You can turn it off and try to print.

• alignment problem

  Hi, I have an alignment problem with my program. I use two verticalfieldmanager in a horizontalfieldmanager to display two columns. The problem is, according to the Simulator tha I use, the text seems aligned or not. In 9000, there is no problem, because the width of the screen is great. But if I use the 8110, which has a narrower screen, this problem occurs. How can I solve this problem for all simulators? Thank you. My code:

  SerializableAttribute public class DetallesOfertaScreen extends form {}
        
  GestNearController controller;
  Horizontal CustomHorizontalManager;
  VerticalFieldManager campos;
  VerticalFieldManager labels;
  RoundRectVerticalManager contGlobal;
  RoundRectContainer contProyecto;
        
        
        
  public DetallesOfertaScreen (GestNearController controller) {}
            
  This.Controller = controller;

  Cabecera
  setTitle ("Datos cabecera");

  If (Controller.getOfertaActual ()! = null) {}
                
  Campos = new VerticalFieldManager();
  labels = new VerticalFieldManager();
  horizontal = new CustomHorizontalManager();
  contGlobal = new RoundRectVerticalManager();
  contProyecto = new RoundRectContainer();
            
  TAM int = Controller.gettamanoscreen ();
  Fuente1 of police;
  Fuente2 of police;
                
  If {(tam > 320)
  fuente1 = Util.getNewFont (21, Font.BOLD);
  fuente2 = Util.getNewFont (21, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
  ElseIf (tam<>
  fuente1 = Util.getNewFont (15, Font.BOLD);
  fuente2 = Util.getNewFont (15, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
  else {}
  fuente1 = Util.getNewFont (19, Font.BOLD);
  fuente2 = Util.getNewFont (19, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
                
  LabelField labelArea = new LabelField("Área:");
  LabelField labelLinea = new LabelField("Línea:");
  LabelField labelVO = new LabelField("VO:");
  LabelField labelTitulo = new LabelField("Título:");
  LabelField labelCliente = new LabelField("Cliente:");
  LabelField labelFechaOfer = new LabelField ("date offer :");
  LabelField labelFechaCom = new LabelField ("date beginning :");
  LabelField labelFechaPrev = new LabelField ("date Aprobacion :");
  LabelField labelJProy = new LabelField ("Jefe proyecto :"); ")
  LabelField labelMeses = new LabelField("Meses:");
  LabelField labelProbabilidad = new LabelField("Probabilidad:");
  LabelField labelHorasPrev = new LabelField ("Horas Previstas :");
  LabelField labelRevision = new LabelField("Revisión:");
  LabelField labelSector = new LabelField("Sector:");
            
  Offer OfertaDTO = controller.getOfertaActual ();
            
  String FechaCom = oferta.getFechaComienzo ();
  String months = oferta.getMesesNum ();
  String HorasPrev = oferta.getHorasPrev ();
  String revision = oferta.getRevision ();
  VO string = oferta.getVO ();
  String date = oferta.getFechaCreacion ();
  String title = oferta.getTitulo ();
  String client = oferta.getCliente ();
  Sector of strings = oferta.getSector ();
  String line = oferta.getLinea ();
  String domain = oferta.getArea ();
  String JefeProyecto = oferta.getJefeProyecto ();
  String FPrevAprob = oferta.getFechaPrevAprob ();
  String probability = oferta.getProbabilidad ();
            
  LabelField input1 = new LabelField (Area);
  LabelField to input2 = new LabelField (Linea);
  Input3 LabelField = new LabelField (VO);
  Input4 LabelField = new LabelField (title);
  LabelField input5 = new LabelField (client);
  LabelField input6 = new LabelField (FechaCom);
  LabelField input7 = new LabelField (FPrevAprob);
  LabelField input8 = new LabelField (date);
  LabelField input9 = new LabelField (JefeProyecto);
  LabelField input10 = new LabelField (months);
  LabelField input11 = new LabelField (probability);
  LabelField input12 = new LabelField (HorasPrev);
  LabelField input13 = new LabelField (Revision);
  LabelField input14 = new LabelField (Sector);
            
  Añadimos a los contenedores
  labels. Add (labelArea);
  labels. Add (labelLinea);
  labels. Add (labelVO);
  labels. Add (labelTitulo);
  labels. Add (labelCliente);
  Para activar el scroll
  labels. Add (new NullField());
  labels. Add (labelFechaOfer);
  labels. Add (labelFechaCom);
  labels. Add (labelFechaPrev);
  labels. Add (labelJProy);
  labels. Add (labelMeses);
  labels. Add (labelProbabilidad);
  labels. Add (labelHorasPrev);
  labels. Add (labelRevision);
  labels. Add (labelSector);
                
  Campos.Add (INPUT1);
  Campos.Add (INPUT2);
  Campos.Add (INPUT3);
  Campos.Add (INPUT4);
  Campos.Add (input5);
  Campos.Add (input8);
  Campos.Add (input6);
  Campos.Add (input7);
  Campos.Add (INPUT9);
  Campos.Add (input10);
  Campos.Add (input11);
  Campos.Add (input12);
  Campos.Add (input13);
  Campos.Add (input14);
                
                
  horizontal. Add-on (labels);
  horizontal. Add (Campos);
            
  contProyecto.add (horizontal);
  contGlobal.add (contProyecto);
  Add (contGlobal);
            
  }
  else {}
  Dialog.Alert ("invalid offer!");
  }
            
  }

  ...

  With 8110:

  

  Thank you!!

• Weird alignment problem

  I think it might have something to do with my work on a small document - 48 * 48 icon - but maybe not.

  I have some strange alignment problems. I have an arrow head, I try to line up on a tree, and no matter what I do, they refuse to align the death. The alignment buttons don't work, dragging manually won't work - it falls right on 1px on each side where I want.

  Any ideas what's happening? I have no guides that would have an impact on it.

  Make sure you have not align on the pixel grid is activated in the transformation Panel.

  Although, if you prepare the content that will eventually be pixel based, leave this setting on ensures things seem to be crunchy in pixels.

• HP Color LaserJet CP1518ni - COLORS NOT ALIGNED

  Has anyone solved this ridiculous question, where all the colors are not aligned when printed?  Black text prints perfectly. But when the printing of the images, the colors are not aligned. Question lasts for months and YES I did the following:

  1. Calibrated thousand times
  2. Restored the default printer 1000 x
  3. Lost my money and has spent nearly $200 on OEM all color cartridges 4... lost!
  4. The drivers reinstalled 1000 x
  5. Have the most up-to-date drivers... believe me.
  6. Ran the printing software HP and doctor Scan and it shows me NO QUESTIONS... ridiculous
  7. Checked the Forum from HP Support with no resolution... I'm with you other people with this same issue. HP HELP PLEASE!
  8. Please tell me that it is a HARDWARE PROBLEM! Of course you won't admit it.
  9. Same problem occurs on my PC - Win 7, Macbook... does not matter... it's the printer!
  10. And finally, I posted this plea for HELP!

  Thank you HP.

  What it sounds like, it's a hardware problem. I would like to begin by ensuring that you have the firmware updated. The firmware of the printer, is what determines how the mechanics of the printer will act. If it has expired, it can cause all sorts of problems. If this does not work, try to do a hard reset. I've included a link to the firmware and instructions for a hard reset below. Let me know what happens.
  
  Firmware:
  http://goo.GL/gCXvr
  
  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.