Random display of odd in IE error

Similar Questions

• Satellite Pro 6100 often randomly turns off and bad RTC error

  Hi, I recently bought a sp6100 and it worked fine at first but now it goes out often random and comes with BAD RTC ERROR at startup. As a musician who uses the pc, it is very painful and I lost much of my work. Anyhelp would be great. Conrad

  HI Conrad,.

  Power loss random is usually a symptom of overheating and can usually be cured by cleaning all dust and lint that built into the CPU radiator. A vacuum cleaner is a useful ally in so doing. Just put the hose against the grids of aspiration air for a few seconds.

  The RTC error refers to the adjustment of the real time clock which is normally held by a small battery, usually mounted on the motherboard of your laptop. It is used to maintain the settings of the BIOS (including date/time) and is completely separate from your main laptop battery. Modification of the RTC (or CMOS) battery will involve some disassembly, so is best left to an authorized Service partner.

  Kind regards

• MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  How can I get rid of this irritating pop-up message whenever outlook is open?

  Without knowing what are certificate errors, it is a shot-in-the-dark.

  80 90% of certificate in Windows XP errors can be attributed to one of the following two issues:

  1. Time Date, time, time zone, or light of day on your computer is/is not set correctly.  The time on your machine should be within 5 minutes of real time for certificates authenticate properly.  Right-click on your taskbar clock, and select time settings to check the correct time.  Synchronize time via Internet can solve this problem.
  2. Windows XP does a poor job of keeping its root certificates (certificates by which all other certificates are considered) up-to-date.  The newer versions of Windows did a much better job.  It certainly wouldn't hurt to update your root certificates and in many cases, this is all you need.  For update, visit the following article:
     "Members of the certificate program root Windows.
        <>http://support.Microsoft.com/kb/931125 >
     Then go down to the subsection titled "root Update Package (for Windows XP only).  Then click on the option "update for root certificates for Windows XP... "the link.  This will take you to the last downloadable update.  Download the package on your computer and double-click it to update your certificates

  One of the above should solve your problem.

  HTH,

  JW

• random display of XP screensaver

  How do I change a regular order random display screen saver?

  Hello

  See the link below and follow the steps mentioned in it and check if that helps.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_setup_screensaver.mspx?mfr=true

  Let us know if it helps.

• Blocked the hotmail Web site to display content with security certificate errors

  Blocked the hotmail Web site to display content with security certificate errors.

  Need help with answers.

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link if you have Internet Explorer and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  Answer to us if you are having problems with Internet Explorer security certificate errors or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Random image work but still get error

  Hello

  My random image generation works but occasionally an error message came out as follows: -.

  Error #2007: Request parameter must be non-null.

  Here is my code: -.

  var ImgReq01:URLRequest = new URLRequest("images/random/image01.jpg");
  var ImgReq02:URLRequest = new URLRequest("images/random/image02.jpg");
  var ImgReq03:URLRequest = new URLRequest("images/random/image03.jpg");
  var ImgReq04:URLRequest = new URLRequest("images/random/image04.jpg");

  var imgList:Array is [ImgReq01, ImgReq02, ImgReq03, ImgReq04];.

  var imgRandom = imgList [Math.floor (Math.random () * imgList.length - 1)];

  var imgLoader:Loader = new Loader();
  imgLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onComplete);
  imgLoader.load (imgRandom);

  function onComplete(event:Event):void
  {
  var randomImage:Bitmap = Bitmap (imgLoader.content);
  randomImage.x =-203;
  randomImage.y =-280;
  addChild (randomImage);
  event.currentTarget.removeEventListener (Event.COMPLETE, onComplete);
  }

  I understand no no matter who might shed light on why I get this error message?

  Thank you very much

  the line:

  var imgRandom = imgList [Math.floor (Math.random () * imgList.length - 1)];

  is the place where it fails.

  Math.Random () returns a value between 0 and 1. Including zero, excluding 1.

  Multiply it by the length of the results list something between 0 and something less than the length of the list.

  subtract 1 and you have something less than zero.

  That should do it

  var imgRandom = imgList [Math.floor (Math.random () * imgList.length)];

  No subtraction, just rounding down. Thus, he never returned a number being the length of the table prevent errors on this end. It will never be less than zero because Math.Random () returns nothing less than zero errors preventing on this end.

• My screen is randomly display distorted graphics and then freeze it or restart itself?

  The problem seems to occur randomly, sometimes, the computer may be for a few hours before that happens, sometimes within a few minutes. So far, it just happened so I was browsing the web using IE (although I could not test at length to make sure that it is the only time where what happens).

  The screen will deform with horizontal blue lines and fixes other random colors. After a few minutes, the screen returns to normal, but the computer froze and is inadmissible. Twice so far (but), the system restarts and gives the screen "windows did not shut down correctly.

  So far the problem did not appear in safe mode. The event viewer displays all errors happening at the time that the problem occurs. I suspect, it may be a problem with the graphics card, but have no idea how I would be able to test this without buying a new and replace it.

  Anyone has ideas or offer any help?

  Thank you

  Thank you for your help. I managed to remove the monitor, which leaves the cable or the graphics card. Might be time for the repair shop, I think! 9 s

• Re: Satellite R630 - 13L randomly display brightness to OverDrive ramps

  Since the purchase of my R630 - 13L, sometimes the brightness on the screen to not appararent reason would begin to thin to the point where the screen is saturated and the graphics download "upset".

  As randomly as it started, it ended. I thought it was some kind of sensor related to the camera built-in that adjusts automatically the brightness based on the lighting conditions, but then again I wasn't changing my environment I see not all the controls in the display panel.

  The problem now is that when it saturate the display (as it is now) it stays on overdrive.

  Everyone knows this?
  Any suggestions or ideas?

  Hello

  The brightness of the display can be changed using the Fn + F5 (decrease) key and Fn + F6 (increase).

  Have you checked this key combination? Does that help?

• Vista crashes saying display driver stopped workikng ATKMDAG error code

  I have a HP Pavilion AMD Sempron (tm) Processor 3000 + 1.80 GHz 768 MB ram 32-bit o/p/system running windows vista keeps crashing and display display driver stoped working error ATKMDAG

  Hello

  See if that helps you.

  Go to the HP Web site at the address here > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  http://WWW8.HP.com/us/en/support-drivers.html

  See you soon.

• Having a problem with a driver displays a root [* 6to4mp\0000 error? __]

  get an error for this driver is not able to open Microsoft.

  Hi Silentwatcher,

  1. a recent change in software/hardware on your computer?
  2. What is the full error message?
  3. when exactly you receive this error message (at startup or when you are working with any application)?
      
  Step 1:
   
  I suggest you check in Device Manager for any yellow exclamation on any device.
   
  Reference:
   
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
   
  Step 2:
   
  You can also use Event Viewer to search for information on the problem.
     
  Reference:
  
  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can check for more information about this at the time where it appeared and post this information here to help us narrow down where the focus.
  
  Step 3:
  
  I also recommend you to update the drivers on your computer and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  (b) in Device Manager, look for the device and then double-click the device name.
  c. click on the driver tab, then click on set to update driver and follow the instructions.
   
  Reference:
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Visit the manufacturer's Web site to download the latest drivers for the hardware.

  Step 4:

  Disable IPv6:

  
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  
  NOTE: You should do this for each network connection.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Tried to build and run the "QXmlStreamReader" project, but the display of the device debugging errors] error 2, no rule to make target "main.cpp", need to "debug/main.o.

  I have tried to build and run the project "QXmlStreamReader" with momentics

  but display as errors

  The path location type Resource Description
  make: * [Device-Debug] problem error 2 QXSRExample C/C++
  make [2]: * no rule to make target "main.cpp", need to "debug/main.o.  Stop.    QXSRExample C/C++ problem
  make [1]: * [debug] problem error 2 QXSRExample C/C++

  My project is to

  CBC

  main.cpp

  qxsrexample.cpp

  Inc.

  qxsrexample.h

  assets

  hand. QML etc.

  Reference: http://qt-project.org/doc/qt-4.8/qxmlstreamreader.html

  And

  http://developer.Nokia.com/community/wiki/QXmlStreamReader_to_parse_XML_in_Qt

  I posted a few snippets on the forum some time ago, maybe they are useful:

  https://supportforums.BlackBerry.com/T5/native-development/how-to-parse-XML-data-coming-from-server-...

• displaying a class not registered error when you call of duty 2 on winds 7?

  whenever I tried to run the game it displays class not registered error

  You said launch, so this may not apply, but apparently, it happens to some people when
  install the game and the fix is not not to use the Autorun feature during installation.
  Go to start-computer and Open the disc. Then run setup.exe from there.

  I don't remember having this problem with COD2. It can only happen if you install to the default location
  Program Files (x 86).
  The game runs without problems on Win7 with no compatibility required setting.

• Validation errors is displayed does not in the errors of Validation tab

  Hello

  I have a fish importation but validate grey fish.

  I have 4 validation errors, but they are not displayed in the validation errors tab.

  Can I use the show | Data invalid tab data charge, but our users (and myself) expect not to be displayed in the tab mistakes of Validation?

  Any ideas greatly appreciated

  C

  Hello

  Thanks for the replies. A power off EPM has fixed the interface.

  See you soon

  C

• help with script Math.Random display)

  OK, after help on another thread I managed to get this script

  
  var r_text = new Array ();
  r_text [0] = "all the leaves are brown;
  r_text [1] = "and the sky is gray."
  r_text [2] = "I was for a walk."
  r_text [3] = "on a winter day.
  r_text [4] = 'I'd be safe and warm. "
  r_text [5] = "If I is in L.A."
  r_text [6] = "California dreaming, such a winter day;
  var i = Math.floor (7 * Math.random ())

  document. Write (r_text [i]);

  who will work on webpages when updated, but I need it to operate when a button is pressed and displayed in a text field in my pdf

  I'm a total noob with javascript only to start learning today so as much help that pos will be great thanks in advance

  Instead of this line:

  document. Write (r_text [i]);

  You need to use something like this:

  this.getField("Field_name").value = r_text [i];

  Or if you use it as the custom text field calculation script:

  Event.Value = r_text [i];

• Random display of the results of the query (no repeat)

  First of all, I'm new to ColdFusion, so please forgive me if the answer to this is blantantly obvious, if not totally impossible. Here's my problem.
  
  I queries a database with several hundreds records. The query will return an average of 10-15 records. Then, I want to display 2 of these files at random. I have so much work. The only problem is that every so often, the 2 folders that are displayed are the same record. I need avoid this outcome. The 2 folders should be always different.
  
  Here is a simplified version of my code:
  
  < CFQUERY "queryname" datasource = name = 'Datasourcename' >
  SELECT * FROM residential
  WHERE ListingOfficeName = 'Steve Realty.
  < / CFQUERY >
  
  < cfset randRecordsList = ">
  < cfloop from = '1' to '2' index "i" = = >
  < cfset randVal = randRange(1,queryname.recordCount) >
  < cfset randRecordsList = listAppend (randRecordsList, randVal) >
  < / cfloop >
  
  < cfloop list = "" #randRecordsList # "index 'i' = >"
  < cfoutput >
  #queryName.FieldName1 #.
  #queryName.FieldName2#.
  #queryName.FieldName3 # < br >
  < / cfoutput >
  < / cfloop >
  
  Any help would be appreciated. Thanks in advance.
  

  Here's the general idea. You can handle the specifics.

  generate a list of numbers.
  maxnum = 15;
  numlist = "";
  for (i = 1; I lte maxnum; I = i + 1)
  numlist = listappend (numlist, i);

  randomnums will be two random numbers
  RandomNums = "";
  x = true;
  While (x is true) {}
  ThisNum = plageAleatoire (1, maxNum);
  If (ListFind (RandomNums, ThisNum) is false)
  RandomNums = ListAppend (RandomNums, ThisNum);

  If (ListLen (RandomNums) 2)
  x = false;
  }