Random sound board problem

Similar Questions

• Random sound 'connect' followed by "disconnect" sound

  Random sound 'connect' followed by "disconnect" sound

  In the last days, I started hearing the "connect" and "disconnect" sounds very randomly and quite frequently when using my computer.   I started the Manager tasks to see if I could determine what was causing the sounds occur.  To the best of my knowledge, the EEM of sounds to occur every time 'mobsync, exe' (microsoft Sync Center) starts.  I never remember activate "mobsync" (but it is possible that one of my kids got on and did something) and I saw an internet post saying that she could not be disabled.

  How can I stop this?  It's quite annoying to listen all day since I work from my computer!

  Hi dexxamax

   

  First, I suggest you to check if you have any sync partnerships with files or devices. You can check if put an end to these partnerships help you solve the problem. Refer to the following links for assistance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-sync-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-sync-errors-and-warnings

   

  I hope this helps.

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  How do I rebuild the icon Cache in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• random animation + random sounds and background music

  Hi guys!

  I am new to AS3, but I have to do this project for the class, and I really don't understand how to do it.

  I searched the forums and the internet, but did not find a lot of information. I found most of this code on the Internet however, and while I understand very well, I master AS3 enough to program myself.
  Could you guys please help me a bit with this?

  That's what I'm trying to achieve:

  • Background music loop in the back, which begins with the opening of the swf file and never stops. I think I've realized that, with this piece of code:

  import flash.media.Sound;

  import flash.net.URLRequest;

  import flash.media.SoundChannel;

  BG music

  var music: Sound = new Sound (new URLRequest ("music1.mp3"));  same folder

  var sc:SoundChannel;

  SC = music.play ();

  One thing though: it would be cool to put in a loop, and I don't know how to do this.

  • I also need various small audio clips to play randomly above the aforementioned background music. I use this, which works a little, but I would like to have more control on the randomness. Ideally the clips should not play twice in a row. I don't know how to do this.

  import flash.media.Sound;

  import flash.net.URLRequest;

  import flash.media.SoundChannel;

  import flash.events.Event;

  songs of the var: Array = new Array ("sound1.mp3", "sound2.mp3");

  Sound: sound var;

  var soundChannel:SoundChannel;

  var randnum:uint;

  function playsong()

  {

  RandNum = Math.Floor (Math.Random () * Songs.Length);

  Sound = new Sound();

  Sound.load() (new URLRequest("sounds/"+songs[randnum]));

  soundChannel = sound.play();

  soundChannel.addEventListener (Event.SOUND_COMPLETE, playrandomsong);

  }

  function playrandomsong(e:Event)

  {

  playsong();

  }

  playsong();

  • Finally, I need to move from frame to frame at random to play different animations. For example:

  Project starts, background music starts playing, we hear random sounds played one after the other, while some animations are visible on the screen, playing in random order.
  I don't know how to do this.

  Thank you very much for your help! I'll try to find out on my own, but any help will be appreciated.

  use a Boolean value to prevent the execution of code:

  var alreadyExecuted:Boolean;

  {if(!alreadyExecuted)}

  alreadyExecuted = true;

  .

  . code you want to run only once, regardless of how many times this frame is entered

  .

  }

• Random sound disappearances

  Hello

  I have a spectrum Envy 14 "with Win 8.0. For the last month or so I sound (completely) disappears at random times. Back to zero is usually solved the problem... but that can be a pain if I'm in the middle of a large number of projects. He was working this morning... closed the lid... open 30 minutes later and NO sound.

  Hope someone can help me.

  Thank you!

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the laptop and when Windows rebooted, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Random sound no longer works

  Got windows 7 for a while. The sound just stopped working randomly. I can see her on the volume bar, but it is simply not get out my speakers.

  I uninstalled and reinstalled soundmax drivers, but still no sound.  I checked for similar problems, but other issues seem to happen just as people upgrade to windows 7.  My sound worked fine on windows 7 and it just seems to stop working out of no where. I don't know what it could be.   I have Windows 7 Home premium.

  Hello Vishal11111,

  Thank you for visiting the Microsoft answers Site.

  To better help, please give the make and model of your PC. Please also relay the exact model of the audio device installed.  In addition, you can check that the last device audio driver compatible Windows 7 provided by the manufacturer of your audio device is installed.

  You can also check that the speakers are set as a default playback device. To do this, right click on the speaker icon in the taskbar, and then click playback devices. Then click the pregnant, do a right click and then click on set as default device and then click OK.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• N100 random diferrent closing problem... RESOLVED (clik for solution)

  Hi, this is my first post...

  I bought a friend a Lenovo 3000 n100 0768-6vg(made in 06/08)

  It worked fine except for the drums, which I think he's dead...

  When I connect power cord the charge led flashes red once then green and stays like that for about 4-5 seconds... sometimes after a few minutes it starts to blink red as he is in charge, but he died iven after 20 minutes...

  in any case I don't mind the battery problem... the main thing as it sounds...

  I started the leptop and worked verry well, answered all the functions but I disliked the windows install so I installed a new copy then the problems started...

  He had originally Windows xp home edition and I wanted to install windows xp sp2, a new install...

  After installing windows, when I was a few steps to end install, the leptop suddenly shutted down

  now when I try to start windows, after 5-10 minutes it randomly stops

  Iven if I left it in bios mode it stops... I managed to get into windows and install SpeedFan to check temperatures and it is said that the cpu has aprox. 48-50 degrees celsius in normal mode...

  After a reboot I tried to stress him out and get a maximum of 60 to 65 degrees...

  I am desperate... I have tried averything... power without battery... no hard drive (with an xp live usb)...

  could someone help please?

  PS: I have experience in the repair of office but this thing is relatively new to me...

  an update of the bios could not solve my problem? : s

  I found the problem by a mistake ... .the how it happened

  I opened the leptop and close to the circuit of battery I saw something strange... I think that a liquid has managed to enter... I have only out cleanead and nothing... I removed the battery but still nothing...

  the solution I found sounds is like this:

  If you remove the battery charger wile it is still plugged, the 'bad' run will remain in the leptop through capacitors... Yes,

  Unplug the charger...

  Battery remov...

  leave it like that for 1 to 2 minutes wile pressing the power button (to drain run it), and then reconnect the charger without the battery...

  and voila, the liptop works fine without restarts and other animals

  I hope this will help others who encounter this problem... at least they can try this before taking the leptop at a service center

  Cheers!

• Virus or the logic board problem?

  Everyone has this screen before? Another screen that appears is a bunch of letters and numbers. Now my computer won't even turn on half the time. Sometimes just the fan will start the liquidation. Before what is going on started my computer would freeze and then turns off randomly. I called apple and I also took at the Genius Bar. They think maybe it's logic board. The Lady said that my best money wise option would be that she be sent for $280, more repairs before as I do that I wanted to see if anyone had any advice. At this point, I wonder if I should just get a new computer. I don't use the computer a lot to the point where this should be the case. Would it maybe a virus?

  

  No, it is not caused by malicious software.

  You must replace the system board, if you want to keep the Mac.

  Best.

• 9.3.2 sound notification problem

  Hello..

  I updated my iphone 5 to 9.3.2 days ago

  But I have a big problem... There is no sound notification at all

  ((Quand j'ai regarder deles de vidéos youtube le son va normalement))

  But when I open the GAMES or someone call or text - me me.  There is no sound at all

  When I use headphones... Everything happens normally

  The problem happens just with games and notifications

  I tried to reset all the settings and network settings but nothing has changed

  What I can do!

  Help, please

  Thank you

  Try resetting your device. It will help you. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

• Stops at random - memory/battery problem?

  Hello

  I use a Macbook Pro (retina, 13-inch, early 2013) and OS 10.11.3

  Recently I had problems with what I thought it was my battery... The laptop randomly stops (if not connected to the power supply), usually when it is less than 50% charged. When I then connect it to the power and turn it on, my date and time was given to zero on January 1, 2013 or something.

  It becomes more and more difficult to work with, and it seems that the percentage that he dies gets higher. Sometimes I have an error message saying 'Battery of Service', but sometimes that happens and is not at other times. My battery had only 300 cycles, so I'm a bit puzzled as to why this is happening.

  In any case, just to be safe, I ran a test for Apple hardware, and I got this error: 4MEM/61/400000000

  That seems to say that there is a problem with my memory. I don't know if the problems of memory can cause such shut downs, or if it's my battery. I don't really want to take in battery life if she will come out with the same problem.

  Thank you very much for your time and help.

  Please take the computer to the Apple store to have the computer checked.

  The Genius Bar reservation:

  http://www.Apple.com/retail/Geniusbar/

  Best.

• Failing video card? Or a logic board problem?

  Re: video card failure?

  It is a follow-up to a previous debate.  Less than 2 years ago, I had a default videocard from apple (OEM) with lines of scratches on the screen.  I replaced it with a

  ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro Apple sold by: JAG technology it worked fine until I have let my old Mac 2008 for 9 months. When I turned it on to use for art, the startup has been slow and the screen became often black or never turned on at all. And the map seemed to be running really hot.    I pulled the card according to the suggestions and started and checked start with Hello time and on screen sharing my network and it seemed to have a time of normal start for this computer. But when doing screen sharing the screen remains black. So, I can see the contents of the hard drive, etc., but there is no display.

  I ran TechTool Pro and all components on the Mac pass inspection including the video ram.    I wonder if the problem is a graphics processor integrated on the system board itself or just the graphics card.    If the chip card display does not work, shouldn't be able to see a display from a distance even in the absence of a graphics card? Or not?   I don't want to pay $150 to replace a card if it is bad.

  Thank you for your help.

  The f

  There is no piece of the display on the map. For video, you need a working video card.

  Try reinstalling on both ends of the cables of two power between the card and power on the logic board UAX connectors.

  Check that the fan turns freely

• Sound driver problems

  Hello world

  I reinstalled windows in my computer after you have removed all the files it contains.

  Therefore, I unfortunately lost the recovery partition.

  Now, after you have reinstalled the Windows 8 Pro, I installed all the drivers and everything works normally except the sound.

  However, I have been using Ubuntu after reinstaled Windows and I DIND'T have no problem with that.

  I thought that maybe this could be a problem inside, but when I use me headphones, or when I use my computer with my TV with HDMI, the problem persists.

  My computer is a HP ENVY m6-k010dx Sleekbook.

  So, what shoul I do to have it fixed?

  (Sorry for my bad English )

  ---------------- UPDATE ----------------

  I use a Linux Live USB to test the sound, as it could be any physical problem.

  However, it turned out that it really is a driver problem.

  I found a solution

  Just after installing Windows 8.1 the problem fixed itself

  Thanks for your help ():

• Equium A100 - 147 Virtual Sound reinstall problem

  I read a few posts about the same problem I have, but with no definitive answer. I have the satellite A100-147 with Windows XP Media Center. I downloaded a few files updated on the Toshiba site (all for my model), including:

  acsil-xpmce-100008-en
  Assist-xpmce-10300-en
  confree-xpmce-59007ab-en
  csutil-xpmce-7211006
  Tonalite-xpmce-3221506-en
  display-xpmce-142004543
  fever disease-xpmce-2004
  Pcdt-xpmce-321u-en
  pwrsav-xpmce-70307i-en
  sdform-xpmce-2200-en
  SD-secure-xpmce-104-en
  Sound-xpmce-51005253
  Toupad-xpmce - 10001st - en

  and then: tvs-xpmce-10312-en (latest driver Virtual Sound for the A100-147)

  I uninstalled the old version of the virtual sound driver before attempting to install a new one. But as I've seen elsewhere, I get the message:

  "Toshiba Virtual Sound can't stand your computer."

  I spent all afternoon looking up and trying to find ways to solve this problem. I've since updated my BIOS (bios-550win). Not a thing I try it will work. I even deleted the references to his virtual in the registry where there was no ongoing conflict. It made no difference if.

  Could someone Toshiba please explain to me why I am told that I can not install which worked perfectly until this morning, before these updates, which are all intended for my laptop model? This is ridiculous. My apologies for my tone, but have lost hours on it, I'm extremely frustrated and you want just like it was back in my laptop (and before you ask, Yes, I tried a system restore, but that does not work either).

  Thank you

  Mac

  Hello
  I have the same problem. Please check the post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21761
  I have received no concrete response.
  :(

• P series too hot and sound card problem

  Hello

  in recent weeks, I have a problem with the temperature. The P series of satellites is much too hot, even if only the essential progs are running, the processor runs with 100% very often. Without the Task Manager (to close the CPRS) of "windows" the machine crashes several times down!

  And since I've updated the driver sound in August this year, the sound may not be performed correctly. The sound card is not identified by diff. progs. MP3 direct cut and sound blaster, during the race.
  I can't save anything! So bad!

  Hello!

  Clean the laptop? You can use spry compressed air could blow the dust from the cooling fans. So do not disassemble anything.

  Which audio driver use? Toshiba or manufacturing as Realtek? Maybe there already is a new or try again with the old driver.

  Moreover, what Satellite phone do you have?

  Good bye