Range Dell EqualLogic has stopped working when you restart the failure
During and after an interruption of scheduled maintenance work, ESXi cannot mount on our Dell EqualLogic Array data warehouses and I have no idea why.
We lack ESXi 5.0. Shut down us throughout the weekend, replaced the network cables and when we returned to our ESXi hosts could not see the Bay EqualLogic iSCSI, but you could see several other berries on the same storage system iSCSI. Digging into logs, I see the ESXi host making the CHAP authentication to the EqualLogic Bay, and the said table it connects successfully, then it loses connection about 10 seconds later. 10 seconds more ESXi tent reconnection to the EqualLogic and the same thing is happening again.
I see several newspapers in ESXi hostd.log indicating this table goes ONLINE and off LINE and another line indicating "sense data Possible" leading me to http://KB.VMware.com/kb/289902 . I feel really disabled at the moment because it's the Bay of storage accommodation our vCenter Server, which puts us in trouble right now.
Also, if I try to "Add Storage", ESXi sees EqualLogic stores exist (watch a sufficient volume, size etc.). However, as I'm trying to add them (via vSphere Client), step 1 takes a lot of time to finish, step 2 indicates the "disks are empty" (which I don't believe), then after an another long this timeout a popup error.
Are there commands or utilities that are good for the diagnosis of iSCSI specifically?
I can post more specific journal details if it is useful.
PS - The new network cables are ok in communication with other storage targets, and it has not replaced the EqualLogic cables.
Fixed; the MTU setting on my storage switch was mowing part of storage traffic. Here are the troubleshooting steps that I went through, maybe it'll help someone else. The solution didn't exactly have anything specific to do with ESXi or EqualLogic. Basic troubleshooting and digging.
Newspapers/events storage array inspection revealed he saw and accepted the ESXi host connection appempts. I saw messages to the effect of:
-Connection of ESXi iqn blah blah blah established; Successful CHAP authentication.
-10 seconds later: Connection reset / abandoned by peers.
-5 seconds later: ESXi connection successfully established...
(rinse and repeat several times)
Inspection of the file hostd.log ESXi showed several messages of 'connection reset by peer '. The storage array and ESXi have been pointing to the other... so the switch is the only thing in the middle.
Troubleshooting steps now:
-using the vmkping ping on the table of the ESXi - success: vmkping 192.168.1.20
-using the vmkping ping on the table of the ESXi with a size of 9000 (jumbo frame size): NO RESPONSE! : (vmkping) s 9000 192.168.100.20<-- this="" is="" where="" the="" money="" was="" for="" finding="" the="">-->
MTU has been set at around 9000. It turns out that the switch should be set a little higher (taking into account headers of packets? who knew)
So this Setup ran for more than a year of intact working and just stopped when we took everything downstairs and brought it up.
Tags: VMware
Similar Questions
-
Explorer Windows has stopped working when you open the folder movies
Original title: about a week ago my windows Explorer began to close and restart but only when I try to open 1 specific folder... Help
in the folder my documents, I have a folder called my muvies when I try to access it I get a window that tells windows Explorer has stopped working the TI restarts itself. also, if I try to change how the icons in this folder look same result, but not with anything else. I can access all my other files without problem
Also, can you check here?
Start > Control Panel > system and Maintenance > Problem Reports and Solutions > view problem history
You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view problem details
What information is given?
-
Error "Windows explore has stopped working" when you open the file in my documents
Original title: opening a file in the folder my documents
Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?
Hi dalintn,
1. What is the file format of the document?
2. are you able to open documents from other locations?
3. did you of recent changes on the computer?
Check if the similar problem persists when you access the document from any other location on the computer.
Method 1
This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2
If the previous step fails then I would suggest that you do clean boot and check.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The Windows Shell common DLL has stopped working when you use the joystick havit HV G82
The Windows Shell common DLL has stopped working...
I have a gamepad havit HV G82 try to run win 8
When I go to control panel > devices and printers > game controller settings > propertiesIn properties each time I click on Vibration Test tab, I get this error "The Shell common Dll Windows has stopped working"
When I play games also buttons map correctly
Any help is very appreciated
Thank you.
Hello
Have you managed to solve the problem by using another approach?
You can contact the manufacturer of the device to check what they have to say on this issue.
-
The Windows Shell common DLL has stopped working when you use the joystick Frontech JIL 1731
Original title - Windows Shell common Dll has stopped working...
I have a Frontech JIL 1731 gamepad
When I go to control panel > devices and printers > Generic USB Joystick (Game Controller Settings) > propertiesIn the properties... Whenever I click on Test of Vibration tab... I get this error (link to image): http://img341.imageshack.us/img341/8023/capture1hce.pngPlease help me with this error and more I can not play with vibration... means I can use the controller to play games, but there is no vibration...:(j'ai aussi tourner sur la vibration dans le jeu...:/)Help, pleaseThanks in advanceMy assembled computer specs are-Motherboard ASUS M5A88-MAMD FX-6100 (3.30 GHz, 8 MB L3 Cache)AMD Radeon HD 5450 1 GB8 GB RAMWindows 8 Pro x64bityou are awesome... I have beeen trying several solutions to the problem of vibration, but your technique works like a charm
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
Windows Mail has stopped working when I close the program
After using Windows Mail successfully, I close the program by clicking on the cross at the top right and immediately a box appears saying that Windows Mail has stopped working. Then, Windows Mail opens again and can be stopped as usual without the warning that it has stopped working. How can I prevent the box "Windows has stopped working' appearing and restart the program?
Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
I suggest you to try the steps in the following Microsoft article and check if this may help.
Solve problems with Windows Mail:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
Hope the information is useful.
-
How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?
How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?
Please try the following steps.
- Manager of tasks opened gently and then close process and relaunch LR
- Creative Cloud.exe
- Adobe CEF Helper.exe
- Service.exe Office Adobe
- AdobeIPCBroker.exe
- Adobe Installer.exe
- AdobeUpdateService.exe
- AdobeServiceInstaller.exe
- CreativeCloud (URIHandler) .exe
- AAM updates Notifier.exe
- CCLibrary.exe
- node.exe
- CoreSync.exe
4: If this does not work please remove Cloud Creative app.
- Using creative cloud | Uninstall the creative cloud desktop application
- https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html
3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
SE error message "Windows Explorer has stopped working" when you click on network and sharing Center
Original title: Windows Explorer has stopped working when I click on network and sharing and also...
Hello technical savvy people!
Windows Explorer stops working when I click on network and sharing, and also when I click on system.
-Otherwise, I rarely get this little automatic.
But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
nor know how my system!Can you suggest healings?
Thank you for your attention,
marlem388Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Hope this information helps.
-
Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.Please help, I need to uninstall something!---------------------------------------------------------------------Windows host process (Rundll32) has stopped workingSignature of the problem:Problem event name: APPCRASHApplication name: RunDll32.EXEApplication version: 6.1.7600.16385Application timestamp: 4a5bc637Fault Module name: StackHash_9629Fault Module Version: 6.1.7601.17725Timestamp of Module error: 4ec49b8fException code: c0000374Exception offset: 000ce6c3OS version: 6.1.7601.2.1.0.768.3Locale ID: 2057Information additional 1:9629More information 2: 9629b7be96a6d05c3ae74dcb4df31847Information additional 3:2716Additional information 4: 271690c76c60b0182163ae26acc5f429Read our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txt
Hello
Method 1:
I suggest to set up the computer in a clean boot state, then try to uninstall the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
SE error message "Windows Explorer has stopped working" when you try to search for document files
Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727
When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!
Please help meHello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.
Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.
Hope this information helps.
-
Original title: Windows Vista 32-bit Edition home
Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.
HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.
Nobody knows what's happening with pc or how that I should do to fix this problem. Any help or advice will be
appreciated.
Thank you
EJ
Hello
1. you remember to make changes to the computer before this problem?
Method 1:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Put your computer in a clean boot state and then check if the problem persists
Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.
-
SE charger of HEALTH professionals has stopped working when you try to install a game.
I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games. I searched and found others have had the same problem with this error message. I found help for Vista users, but there is nothing for the support for Windows 7 users.
I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram. When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.
Here are the details of the error message I get:
Signature of the problem:
Problem event name: APPCRASH
Application name: Start_Here.exe
Application version: 2.0.1.4712
Application timestamp: 4402d 429
Fault Module name: Start_Here.exe
Fault Module Version: 2.0.1.4712
Fault Module Timestamp: 4402d 429
Exception code: c0000005
Exception offset: 00003045
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information 1: 79ee
More information 2: 79ee8ce1c976216026f008da08a6a3a9
Additional information 3: c6a2
Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtI tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.
chk if the game is compatible from this link
http://www.Microsoft.com/en-in/Windows/compatibility/error/index
If not install it in compatibility mode and click on the link for more information.
http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7
If you still have problems with the game contact he is a developer or ask their support for more info...
-
installation of Windows services has stopped working when you try to install the software
Unable to install software.tried cmd method, nothing happens
Original title: installation of windows services has stopped working
Hello Mohit,
Welcome to the Microsoft Community Forums.
I understand that you have a problem with the Windows Installer service.
But I would like to know some more information on this issue to help you better.
(1) what is the full error message?
(2) what software are you trying to install?
(3) have you tried to install any other software?
(4) when you say, "tried cmd method" what exactly mean you?
In the meantime, please try to follow the following suggestions to solve the problem.
Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.
How to fix problems with the Windows service installNote: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.I hope this helps. Otherwise, feel free write us back and we will be happy to help you.
Thank you. -
Driver.exe has stopped working when you try to play Driver.San Francisco.
I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7
Hello
1. what game do you play?
2. have you made any changes to the computer?
3. this problem occurs only with the particular game?
4. What is the exact error message you received?
Method 1:
I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I suggest you to see link and check.
"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2665946
See also:
If the problem is related to Microsoft, I suggest you to see link and check.
Game hangs or quits unexpectedly
Maybe you are looking for
-
How to get 2 albums to be instead of a single disk drive
Sometimes when two importers disc CD (such as Hamilton) I tunes creates two distinct albums instead of one. How to combine a continuous reading of album. Otherwise, I have to create a playlist.
-
PSP10 satellite driver for FX 5600 GeforceGo?
Hello! I got this noteboook mentioned in the topic, and my question is: where to find new drivers for the GFX card? Toshiba drivers are old (they are lying from 2004, but all the driver files in this archive have been modified in 2003...) that even h
-
Config Free - Connectivity Doctor does not work correctly
Hi all yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just
-
I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error
-
So I try to spend 8 to 8.1... "What needs your attention" watch I need to uninstall HP ProtectTools... I'm doing this, reboot and 8.1 watch yet I need to uninstall... When I try again it gives "error application of transformations. Check that specifi