Explorer Windows has stopped working when you open the folder movies

Similar Questions

• Explorer Windows has stopped working. (when I open ANY folder)

  any folder, I try to open, (my documents, downloads, photos, C drive, folders on the desktop, my computer, readers Flash and even mp3 players) an update Microsoft security Essentials scan clean and sfc/scannow does not solve the problem, nothing works it is so annoying because I can't to anything that is not on the desktop

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have EVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps: (ran SFC so you also run CheckDisk?)

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• Error "Windows explore has stopped working" when you open the file in my documents

  Original title: opening a file in the folder my documents

  Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?

  Hi dalintn,

  1. What is the file format of the document?

  2. are you able to open documents from other locations?

  3. did you of recent changes on the computer?

  Check if the similar problem persists when you access the document from any other location on the computer.

  Method 1

  This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  If the previous step fails then I would suggest that you do clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?

  How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?

  Please try the following steps.

  1. Manager of tasks opened gently and then close process and relaunch LR
  • Creative Cloud.exe
  • Adobe CEF Helper.exe
  • Service.exe Office Adobe
  • AdobeIPCBroker.exe
  • Adobe Installer.exe
  • AdobeUpdateService.exe
  • AdobeServiceInstaller.exe
  • CreativeCloud (URIHandler) .exe
  • AAM updates Notifier.exe
  • CCLibrary.exe
  • node.exe
  • CoreSync.exe

  4: If this does not work please remove Cloud Creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• The Windows Shell common DLL has stopped working when you use the joystick havit HV G82

  The Windows Shell common DLL has stopped working...

  I have a gamepad havit HV G82 try to run win 8

  When I go to control panel > devices and printers > game controller settings > properties

  In properties each time I click on Vibration Test tab, I get this error "The Shell common Dll Windows has stopped working"

  When I play games also buttons map correctly

  Any help is very appreciated

  Thank you.

  Hello

  Have you managed to solve the problem by using another approach?

  You can contact the manufacturer of the device to check what they have to say on this issue.

• Explorer Windows has stopped working when I right click on the files

  When I need to click with the right button on folders, windows Explorer has stopped working.

  up to now, still can't use the right click menu ~.

  Yes, it's the details of the problem.

  Unfortunately, it does not identify the failing module.

  At this point, it may be useful to try to capture a dump of user of the explorer.exe crash mode.

  You can configure Windows to create dumps of user mode. First, create a System Restore Point.

  If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
  "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
  00, 6 D, 00, 70, 00, 73, 00, 00, 00

  
  After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  More information on the collection of user-mode dumps:

  ("msdn.microsoft.com/en-us/library··· .a 85)

  You can also try to use ShellExView, as suggested by BurrWalnut, to try to eliminate a problematic third-party shell extension.

• The Windows Shell common DLL has stopped working when you use the joystick Frontech JIL 1731

  Original title - Windows Shell common Dll has stopped working...

  I have a Frontech JIL 1731 gamepad

  When I go to control panel > devices and printers > Generic USB Joystick (Game Controller Settings) > properties
  In the properties... Whenever I click on Test of Vibration tab... I get this error (link to image): http://img341.imageshack.us/img341/8023/capture1hce.png
  Please help me with this error and more I can not play with vibration... means I can use the controller to play games, but there is no vibration...:(j'ai aussi tourner sur la vibration dans le jeu...:/)
  Help, please
  Thanks in advance
  My assembled computer specs are-
  Motherboard ASUS M5A88-M
  AMD FX-6100 (3.30 GHz, 8 MB L3 Cache)
  AMD Radeon HD 5450 1 GB
  8 GB RAM
  Windows 8 Pro x64bit

  you are awesome... I have beeen trying several solutions to the problem of vibration, but your technique works like a charm

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer Windows has stopped working. Same for the Task Manager.

  I have Windows Vista and have had this computer for several years.

  I tried to work on something yesterday and I found that all my Office 2007 programs would be would break immediately at the opening, while they were working fine a week ago (the last time we used them).  I ran the diagnostic program came not upward with anything and then installed a bunch of windows updates I received automatically.  When the computer restarts now, I get a window in the corner that says 'Custom settings', then a window appears and says that Windows Explorer has stopped working.  I can ctrl/alt/del and open Manager tasks, but when I try to do no matter what to whom, it also stops working.  I not to download anything so I really don't think it is a virus.

  I can't open programs or menus, even if I think I can get a screen of command.  I ran all the tests in the installation disc and did not get any where or the other.

  If anyone can help, I would really appreciate it.

  Thank you

  Mike

  I can show you a workaround until Microsoft fixes their problem.

  As soon as you enter the office hit

  1-CTRL/ALT/DEL to get into the Task Manager
  2. click on the tab Applications (top left corner)
  3. click the new button on the task (lower right corner)
  4. in the Open box, type explore and click the Enter key
  5 do step 3 and 4 once more as quickly as possible

  This should stop the process of recycling the error message

  After stops in the process recycling, you can leave the Task Manager and minimize the Explorer window.  Also, you should be able to leave the Task Manager and windows Explorer now.  If this is not the case, just keep the Explorer minimized window.

  You should now be able to use your computer as usual.

  Let me know how it works for you.  If it works well, spread the word.

• Explorer Windows has stopped working when I try to open a folder

  When I tried to open a file under low load it stopped working. I use windows vista. I don't have windows installation CD because it was pre installed when I bought the laptop. I downloaded windows vista service pack. but the problem still persists. Please help me with solutions

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Explorer Windows has stopped working when I click on the start icon

  Gud afternoon, I have 2 problems.

  1 problem is inCD.exe (which i already clear it but sure my window stopped Explorer working Isit because of this problem stop does not work)

  2nd problem is whenever I click on the icon start at the bottom left and right now I move my mouse select the icon Any1... I had to have this word says

  Explorer Windows stopped working

  Explorer Windows restarts...

  And everything is empty unless I keep trying many times.

  It happen since last night until now.

  So far, I only download Call Of Duty: Modern Warfare 2

  ISIT there is Sthing wrong download this game?

  If someone knows how to Slove this... Please help me... Thank you very much

  Hello

  Check to see if the following is useful.

  Step 1: Run the next Fixit and check if it helps.

  Problems with the overall speed of the system and performance

  Step 2: Search for the issue in a clean boot state. To do this, follow these steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the result of clean boot.

  Step 3: Check out this thread that might have a possible solution to your problem.

  Explorer Windows stopped working

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  I hope this helps.

  Kind regards

  Ramata Thakur.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Range Dell EqualLogic has stopped working when you restart the failure

  During and after an interruption of scheduled maintenance work, ESXi cannot mount on our Dell EqualLogic Array data warehouses and I have no idea why.

  We lack ESXi 5.0.  Shut down us throughout the weekend, replaced the network cables and when we returned to our ESXi hosts could not see the Bay EqualLogic iSCSI, but you could see several other berries on the same storage system iSCSI.  Digging into logs, I see the ESXi host making the CHAP authentication to the EqualLogic Bay, and the said table it connects successfully, then it loses connection about 10 seconds later.  10 seconds more ESXi tent reconnection to the EqualLogic and the same thing is happening again.

  I see several newspapers in ESXi hostd.log indicating this table goes ONLINE and off LINE and another line indicating "sense data Possible" leading me to http://KB.VMware.com/kb/289902 .  I feel really disabled at the moment because it's the Bay of storage accommodation our vCenter Server, which puts us in trouble right now.

  Also, if I try to "Add Storage", ESXi sees EqualLogic stores exist (watch a sufficient volume, size etc.).  However, as I'm trying to add them (via vSphere Client), step 1 takes a lot of time to finish, step 2 indicates the "disks are empty" (which I don't believe), then after an another long this timeout a popup error.

  Are there commands or utilities that are good for the diagnosis of iSCSI specifically?

  I can post more specific journal details if it is useful.

  PS - The new network cables are ok in communication with other storage targets, and it has not replaced the EqualLogic cables.

  Fixed; the MTU setting on my storage switch was mowing part of storage traffic.  Here are the troubleshooting steps that I went through, maybe it'll help someone else.  The solution didn't exactly have anything specific to do with ESXi or EqualLogic.  Basic troubleshooting and digging.

  Newspapers/events storage array inspection revealed he saw and accepted the ESXi host connection appempts.  I saw messages to the effect of:

  -Connection of ESXi iqn blah blah blah established; Successful CHAP authentication.

  -10 seconds later: Connection reset / abandoned by peers.

  -5 seconds later: ESXi connection successfully established...

  (rinse and repeat several times)

  Inspection of the file hostd.log ESXi showed several messages of 'connection reset by peer '.  The storage array and ESXi have been pointing to the other... so the switch is the only thing in the middle.

  Troubleshooting steps now:

  -using the vmkping ping on the table of the ESXi - success: vmkping 192.168.1.20

  -using the vmkping ping on the table of the ESXi with a size of 9000 (jumbo frame size): NO RESPONSE! : (vmkping) s 9000 192.168.100.20<-- this="" is="" where="" the="" money="" was="" for="" finding="" the="">

  MTU has been set at around 9000.  It turns out that the switch should be set a little higher (taking into account headers of packets? who knew)

  So this Setup ran for more than a year of intact working and just stopped when we took everything downstairs and brought it up.

• Windows Mail has stopped working when I close the program

  After using Windows Mail successfully, I close the program by clicking on the cross at the top right and immediately a box appears saying that Windows Mail has stopped working. Then, Windows Mail opens again and can be stopped as usual without the warning that it has stopped working.  How can I prevent the box "Windows has stopped working' appearing and restart the program?

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Solve problems with Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Hope the information is useful.