ranging from windows 8 to 7

Similar Questions

• New Time Capsule ranging from Windows to Mac with file sharing.

  OK, so we bought a new time capsule recently and my family migrates slowly over Apple products.

  My question comes from having moved all our old saved files from various sources during the share of time capsule. Currently, the file system is FAT32 because that's what it was by default and I don't see an option to adjust it.

  "My wife has a time machine backup works fine already on the device, but when she opens the 'data' /: Time Capsule" on the Mac, we don't see any of these files that I put in there. What should we do, she can be seen on Mac.

  

  What OS is the Mac running?

  Can you please show me what you can see on the Mac... because the screenshot of Windows with all the deleted folder names is not helpful at all.

  I assume you can open all windows files... did you create the folder in windows?

  Let me suggest that you create the folder in the Mac. then copy the files through him, to the windows machine.

  Apple uses file permissions, and permissions have become significantly more restrictive of the end. Windows seems to ignore... but you might need repair permissions until it works.

  NOTE... the appearance of the windows FAT32 is not real... It's because of the way windows reads the network of the TC function... the drive is not formatted FAT32 in the TC... It is HFS +, a Mac format... offered by SMB (windows network blocks) which windows reads with FAT32.

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.

• Downgrade from Windows 7 to Windows Vista Home Premium... help please!

  Hello. I'm helping a friend fix his computer. He had someone to download a pirated version of Windows 7 and I am trying to downgrade it to its old Windows Vista. I followed all the instructions on this page http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/downgrade-from-windows-7-to-vista/e95a2e68-34b1-487e-aa56-3dadfea59a8b?tm=1357534800060 to restore the boot sector. When I type in c: D:\boot\bootsect/nt60 everything happens is subsystem needed to support the type of image is not taken in charge. I didn't know how to undo the changes that I had done so far, so I just restarted the computer and hope for the best. Now it is loading Windows Vista Home Premium but I'm unable to open a session the user account... "The service user profile Service has no logon. Message unable to load the user profile "and I'm unable to open a session. Please help me!

  Download a Windows Vista image and use the instructions in the article Create a. ISO file and then burn it to a blank DVD:

  Windows Vista SP1:

  • Windows Vista. UPlay ISO image file

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  --------------------------

  Boot from the Windows Vista DVD

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows Vista click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• To make a Virtual Machine from Windows XP to a hard training camp?

  At first, I use bootcamp to install Windows XP, then I made a virtual machine using the merger. Disk failure hard macbook, good thing I had a backup superduper, call apple and got a new hard drive. Reinstall Leopard and migrate the data back. Is their a way I can do the virtual machine back in a bootcamp partition? because of the game and it is possible.

  With no offense intended if you ask it would be probably faster and easier to just install Windows via Boot Camp and then if you also want to run the Boot Camp partition in a Virtual Machine afterward then you can do it too.

  That said, let me go on what said you, you said... "At the beginning I use bootcamp to install Windows XP, then I made a virtual machine using the merger."  Well your statement could be interpreted as ambiguous and you didn't say what version of Fusion you use so I'll assume 2.x and with this in mind, you have two choices in Fusion 2.x himself.  1. you can run the partition Boot Camp in a VM or 2. You can import the Boot Camp partition as a Virtual Machine based on a normal file and it is then separated and apart from the Boot Camp partition and will cease to be in harmony as running just the Boot Camp as a Virtual Machine partition would be however it gives the possibility to do something else that the Boot Camp partition as a virtual se Machine running can do.

  Now, if all you had done turns partition Boot Camp in a Virtual Machine then you have no other choice than to run the Boot Camp Assistant and reinstall Windows because your SuperDuper! Backup probably would not have the Boot Camp partition in it, and as such, there is nothing to restore the Boot Camp partition.  Did you have a backup Winclone then that would be another story.

  On the other hand was actually imported the Boot Camp Virtual Machine based on the partition to a normal file and you want to use to run from the Boot Camp partition then it's called ranging from virtual to physical or P2V.  If that's what your want to do so that is where my first comment in this response applies mainly.  In any case while V2P is technically feasible is not if easily done for someone who needs to ask because it may be a technical process complex which requires a certain level of expertise that is generally beyond what casual users are configured to do and more technical use should not ask because even if they don't know how they would get the answers before they would ask questions and then ask for verification of what they are seeking first.

  Adequate preparation is absolutely necessary going V2P when it's a Fusion Virtual Machine to Boot, Boot Camp partition natively.

  It has been my experience that unless a Virtual Machine is properly prepared as in the use of SysPrep or other products such as ShadowProtectDesktop that initiating the Boot Camp partition natively an image of a virtual one Machine will get the proverbial STOP: 0x0000007b BSOD so it's one of the good preparation of the main reasons is necessary.

  Unless you have a good reason, then I think a clean build is always the best way to go if we have time, however, if I had a complex construction that I had no time to clean the build and really need to V2P then I'd probably make an appropriate SysPrep, and then use Paragon Drive Backup 9.0 Professional as it is compatible with the Tables of Partition GUIDS and compatible with the configuration of Boot Camp Apple.

  Anyway if your situation is a V2P scenario, then I would say that search you the forum by using V2P or Virtual physical since the search terms such as this have been debated before.

• Thunderbird. Migration from Windows Mail (Win7) and Firefox 35.0.1 is not compatible with ImportExportTools of Mozilla Support

  Try to migrate from Windows Mail, NOT Windows Live Mail in Windows 7 Home Premium.
  When I try and import the messages I get the message ' ImportExportTools is not compatible with FireFox 35.0.1.
  I'm following the instructions at https://support.mozilla.org/en-US/kb/switching-thunderbird.

  Y at - it a compatible version?

  Concerning

  Chris Parker

  You can download the extension using Firefox.
  But you will need to install it in Thunderbird.
  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• How to transfer contacts from Windows Live Mail for Firefox?

  How can I transfer my list of email contacts from Windows Live Mail, Windows Mail or Gmail for Firefox?

  You have not, doesn't Firefox by e-mail or have an address book with "contacts".

• About to transfer from Windows to Mac. Need tips and tricks regarding the transfer. That ExtHD does not need reformatting?

  Transfer from Windows to Mac. Need advice on the brand and model of HD Ext for compatibility which will not need reformatting? Advice welcome.

  If you want a HD post to be read by windows and Mac OS. The best choice would be the format ExFAT.

• UPGRADE FROM WINDOWS 98 TO WINDOWS 98SE

  Hello
  I have a Portege 3110CT I want to upgrade from Windows 98 to Windows 98SE. Is it possible and how can I do?
  Francis

  Hello francis

  Do you have the CD of Toshiba Recovery and Tools & Utilities CD for this laptop?

• Upgrade from Windows Vista to XP?

  Toshiba will offer an upgrade to windows vista from windows xp?

  Hello

  I don t think that Toshiba will offer an update WinXP Vista.
  Windows Vista is a stand-alone operating system and it must be installed with the original Microsoft CD or with the Toshiba recovery image. I'm 100% sure that Toshiba offers the recovery for the latest laptops Toshiba Vista CD.

• PCI after Downgrade from Windows 7 device drivers?

  Driver for:

  Device PCI, PCI Bus 3, device 0 - int 0

  Message:

  The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver.

  Downgrade from Windows 8 for Windows 7 64 bit, driver problems!  Have you tried a number of things, but nothing seems to work? Any ideas?

  Thanks in advance

  At any time.

  Glad to be of assistance.

  I recommend that you use these drivers for everything that you have not yet installed...

  First, install the amd chipset driver and restart.  You want the 49.7 MB file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then is the graphics... install the beta amd catalyst driver and restart.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  Audio: Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownT...

  Ethernet: Download and install the fourth driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTy...

  USB 3.0: Install both.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

  Card reader:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

  3D Driveguard:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1 & CC = US & DLC = in & LC = in...

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127341-1 & CC = US & DLC = in & LC = in...

• I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

  I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

  I thought it would be FAFSA is causing your problem.

  Install Portable Firefox 3.6.x on your hard drive to a Web site. This will not affect any of your current Firefox installation.
  
  http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

• What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  If it is only the data (not apps) I use Dropbox. It turned out to be the best way to move things between the side Mac and the bootcamped Windows of my iMac side. I don't see why it would not work to move data from a virtual machine installation of Win to a BootCamp installation.

• M30X MultiDrive won't burn a DVD from Windows Movie Maker

  Hello

  My MultiDrive M30x will not burn the DVD from Windows Movie Maker and other applications.

  I also had problems with burning CDs (unbranded) of Windows XP, built in utility.

  The multidrive has problems with cheaper brand discs?

  Just to note,
  The laptop was to support guys three times until various issues.
  (1) the hard drive failed.
  (2) the multidrive has failed.
  (3) the motherboard replaced, due to power outages, it would not charge the battery, or recognize that the AC adapter is plugged.

  Note: The hard drive, not the fan made the most noise in mine!

  Thank you

  Hello

  As far as I know (i.e. pre-installed burning software Save now, drag-and - drop) disabled the option of Windows XP burning. In this case if you want to use the Movie Maker or Windows media player burning option, you need to activate this possibility.
  Please, go to the properties of the drivers (right click). Please select the recording tab. CD recording option on this drive must be marked.
  I use the software Nero burning and in my opinion he of one of the best burning programs. In addition, you should try different manufacturers CD/DVD because some CD and DVD is not compatible with some readers. Check the TDK CD and DVD. I never had no problem with these media.

  Best regards