RAW server host paths FEX & pin Network Port

Similar Questions

• FEX Uplink and Ports on the side Server

  I am very new to the environment of the UCS and having to return to the current fairly quickly. I decided to start with the chassis. But have a few questions.

  I hope someone can clarify how serverside ports are assigned less than ports uplink, 2204XP and 2208XP.

  My understanding is that the side ports server are assigned to the uplinks based on the number of uplink configured at the END.

  Once the FEX is initialized ports are hardcoded.

  Assuming 2 (6200 series) FI and 2 FEX (2204).

  2 each to their respective FI FEX uplinks

  8 blades width in the chassis.

  My understanding is;

  Uplink port 1 receive blades (1, 3, 5-7) and uplink 2 (2, 4, 6, 8)

  Question: Which ports are active for each blade and that FEX.

  For example the blade 1 assigned to Uplink on FEX A 1 with FEX B 1 uplink failover

  Blade 3 assigned to Uplink on FEX B 1 with FEX A 1 uplink failover

  Thanks in advance people...

  Hello and welcome to the community,

  "" My understanding is that the side ports server are assigned to the uplinks based on the number of uplink configured at the END.".

  Server ports are assigned to connections rising from ports either automatic (load balanced by available uplink interfaces) or manual pin (PIN LAN groups hard coded)

  2 fIs and IOM 2204 2 with 2 cables on each IOM: "UpLink port 1 receive blades (1, 3, 5-7) and uplink 2 (2, 4, 6, 8)" "< this="" is="" correct,="" odd="" blades="" through="" odd="" ports="" and="" even="" blades="" through="" even="">

  Which ports are active for each blade and that FEX.?

  In this case with a 2204, IOM provides 16 internal ports, 2 for each blade, and you can check which one is active with the command "Show software platform woodside m" mode FEX which is realized with the following commands:

  UCS # connect the IOM

  FEX-1 # display software platform woodside m

  

  You can also go to the vNIC itself in the "Servers" tab by going to the Service profile > network and then double click on in the vNIC and you will see the configuration:

  

  For example: blade 1 assigned to Uplink on FEX A 1 with FEX B 1 uplink failover

  Blade 3 assigned to Uplink on FEX B 1 with FEX A 1 uplink failover

  This will be the case if you have the 'discovery of the chassis/FEX policy' located in the 'grouping preference link' on 'None' instead of 'channel of Port "; If it is "Port Channel", I won't miss not until all other links fail in the same module e/s, see below

  

  NOTE: this option is valid only if your hardware is ALL second generation, in other words, it does not work with fabric 61xx interconnections or 2104 IOM

  I hope this helps, if it does, please note it.

  -Kenny

  Note ensure on the limitation of the function of the channel port between IOM and the tissue Message was edited by: Keny Perez

• vSphere HA detected that this host is in a network other than the master vCenter Server is connected

  Hi all

  I try to install a vSphere 5.1 environment (vCenter 5.1 (799731))... It has never been so difficult to get a VMware product running.

  
  Problem:

  As soon as I create a Cluster HA (with 2 ESXi 5.1 (799733)) I get the message:

  "vSphere HA detected that this host is in a network other than the master vCenter Server is connected"

  I tried everything...

  vCenter place in other networks

  Multihomed vCenter

  Place the vCenter in the same network as the ESX host

  Doublechecking ip, subnets, gw, name resolution, vSwitches

  nothing done... is this a bug?

  vCenter and also the two hosts of ESXi now resides in the same L2 network.

  ESX1: 10.254.250.74 255.255.255.0

  ESX2: 10.254.250.77 255.255.255.0

  VC: 10.254.250.29 255.255.255.0

  The message may not be correct.

  Please... @ someone out there... Help! I'm at the end of my knowledge.

  Concerning

  Adrian

  You can check the configuration of VLANS on your physical switch?

  Mike

• Reoprts itdrep server already exists in the network

  Hello
  
  I have two AIX machines with different host names and server application independent of 10 gr 2 installed on both machines. I created a new report server with the name "ITDREP" on both machines (same name on both machines).
  Now when I try from the report server on the Computer1 it starts but after that if I try to start the report server on computer2 it fails with the error "Reoprts itdrep server already exists in the network.
  
  If I want to have a server of reoprt with the same name on both machines, what should I do?
  
  
  Concerning
  Ankit

  As you can see, the port = "14021' for the multicast network.
  If you specify on the second server port = "14022" then you can use the same name reportserver on both servers.
  Only downside is that you can send requests to report from the first server (to the help of run_report_object rwservlet, rwclient or forms) to the reportsserver on the second, but this isn't a problem if you have set up 2 servers identical for purposes of distribution of the load or high availability.

• Satellite 1000, Network Port

  Im having trouble setting up my satellite 1000 as host on a network. It has a network port, but is not acknowleging that there is nothing plugged into it. I think I need to activate my network card, but have no idea how.
  Can anyone help?

  Hello

  Are you sure that there is really a network card installed in your machine? On some models, there is a connector, but it is not connected to any network card.
  Check the Device Manager if you are not sure.

  BR
  Tom

• Behavior of the expected multiple SNMP server host?

  Hi all

  I'm working on a network by which our client has a SNMP existing system on the control switches.

  I add our own SNMP device to the environment, but I want to make sure it does not replace or remove their existing configuration.

  My thoughts are, that if I enable snmp-server host x.x.x.x communitystring

  Will it overwrite their existing snmp server host configuration

  Can anyone confirm this? Especially for 3750's and 2960 x. #.

  Thank you

  Nick

  Hi, no it will not overwrite the existing configuration of snmp.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• bottom of flashplayer internal update server hosted Linux apache2 - flashinstall.log errors

  Hello everyone,

  I've implemented an internal server update for Flash Player as described in the latest guide admin (v16).

  The web server that hosts the files of the last fp_background_update.cab is apache2 on SLES11.

  I configured a customer (win7sp1, fully patched) with mms.cfg pointing to the Web server. There v14 drive installed, activex and plug-in.

  The client using any browser, I can see and download files from the Web server.

  But information update does not install the more recent version, flashinstall.log shows that Web server is contacted and that xml files are processed, but it produdes warning and error codes for which I can't find any documentation, so type in the dark here.

  When you look at the Web server logs I can see more of behavior:

  -Customer pulls the majorversion.xml and the version.xml for new version (v16) - OK

  -The client tries to pull a patch.xml, which does not exist in the fp_background_update.cab. -STRANGE

  -Customer pulls the patch.xml (that I've provided manually by downloading it via wget for webserver) - OK

  -The client tries to shoot whatever it is and causes webserver error 400, which means generally bad customer demand - BAD

  It is access-log Web server without and with patch.xml provided:

  -[12/Feb / 2015:10:33:01 + 0100] "GET /pub/flashplayer/update/current/sau//currentmajor.xml HTTP/1.1" 200 58 '-' ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:33:01 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/version.xml HTTP/1.1" 200 410 "-" ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:33:01 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/patch.xml HTTP/1.1" 404 1051 '-' ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:33:01 + 0100] "GET / ' 400 984 ' - ' -"

  -[12/Feb / 2015:10:35:46 + 0100] "GET /pub/flashplayer/update/current/sau//currentmajor.xml HTTP/1.1" 200 58 '-' ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:35:46 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/version.xml HTTP/1.1" 200 410 "-" ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:35:46 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/patch.xml HTTP/1.1" 200 823 "-" ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:35:47 + 0100] "GET / ' 400 984 ' - ' -"

  It's flashinstall.log without and with patch.xml provided:

  2015 2-12 + 9-33-1, 406 [info] internal 1628 - server.domain

  2015 2-12 + 9-33-1, 406 [info] internal 1629 - server.domain

  2015 2-12 + 9-33-1, 406 [info] 1614

  2015 2-12 + 9-33-1, 406 [info] 1615

  2015 2-12 + 9-33 - 1.469 [info] 1618

  2015 2-12 + 9-33 - 1.469 1619 1063 [info]

  2015-2-12 + 9-33 - 1.484 [info] internal 1628 - server.domain

  2015-2-12 + 9-33 - 1.484 [info] internal 1629 - server.domain

  2015 2-12 + 9-33 - 1.484 [info] 1614

  2015 2-12 + 9-33 - 1.484 [info] 1615

  2015 2-12 + 9-33 - 1,500 [info] 1618

  2015 2-12 + 9-33 - 1,500 [info] 1604

  2015 2-12 + 9-33 - 1,500 [info] 1608

  2015 2-12 + 9-33 - 1,500 [info] 1631 /pub/flashplayer/update/current/sau//currentmajor.xml

  2015 2-12 + 9-33-1, 609 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/version.xml

  2015 2-12 + 9-33-1, 609 [info] 1632

  2015 2-12 + 9-33-1, 609 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/patch.xml

  2015 2-12 + 9-33-1, 609 [warning] 1445

  2015 2-12 + 9-33-1, 625 [warning] 1442

  2015 2-12 + 9-33-1, 625 [info] 1632

  2015 2-12 + 9-33-1, 625 [info] 1600

  2015 2-12 + 9-33-1, 625 1214 12152 [error]

  2015 2-12 + 9-33-1, 625 [error] 1234 0

  2015 2-12 + 9-33 - 1,640 [info] 1612

  2015 2-12 + 9-33 - 1,640 [info] 1620

  2015-2-12 + 9-35 - 45.987 [info] internal 1628 - server.domain

  2015 2-12 + 9-35-46, 2 [info] internal 1629 - server.domain

  2015-2-12 + 9-35-46, 2 [info] 1614

  2015-2-12 + 9-35-46, 2 [info] 1615

  2015-2-12 + 9-35-46, 2 [info] 1618

  2015-2-12 + 9-35-46, 2 1619 1063 [info]

  2015-2-12 + 9-35 - 46,18 [info] internal 1628 - server.domain

  2015-2-12 + 9-35 - 46,18 [info] internal 1629 - server.domain

  2015 2-12 + 9-35 - 46,18 [info] 1614

  2015 2-12 + 9-35 - 46,18 [info] 1615

  2015-2-12 + 9-35-46, 33 [info] 1618

  2015-2-12 + 9-35-46, 33 [info] 1604

  2015-2-12 + 9-35-46, 33 [info] 1608

  2015-2-12 + 9-35-46, 33 [info] 1631 /pub/flashplayer/update/current/sau//currentmajor.xml

  2015 2-12 + 9-35 - 46.143 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/version.xml

  2015 2-12 + 9-35 - 46.158 [info] 1632

  2015 2-12 + 9-35 - 46.158 1630 /pub/flashplayer/update/current/sau/16/xml/patch.xml [info]

  2015 2-12 + 9-35 - 47.110 [info] 1632

  2015 2-12 + 9-35 - 47.110 [info] 1600

  2015 2-12 + 9-35 - 47.125 1214 12152 [error]

  2015 2-12 + 9-35 - 47.125 [error] 1234 0

  2015 2-12 + 9-35 - 47.125 [info] 1612

  2015 2-12 + 9-35 - 47.125 [info] 1620

  Hope someone can help and provide documentation of the error codes for the background update or has any ideas, I'm bytting my teeth on this :-)

  Thank you all

  concerning

  Lars

  Lars salvation,

  According to your server logs files, only the XML file is retrieved.  The server logs have nothing for the Setup file itself, which is what the mistakes are referring to.

  1214 error means that the Setup log file failed to download.  The number of 12152 beside him is a Microsoft error code, which is:

  ERROR_HTTP_INVALID_SERVER_RESPONSE

  The response from the server could not be parsed.

  Error 1234 means the Update ActiveX failed.  Updates from bottom tent always first Update ActiveX (if installed).  Given that the Setup file can't download, the update is also a failure.

  How do you have your server configured?  Please ensure that port 80 is open for HTTP requests (for the Installer).  Since your getting the XML file, it seems that you already have open port 443 for HTTPS requests.

  --

  Maria

• Why double the network ports on a Mo?

  Hi all

  I see that many MB s, especially game and Server MB, now come with double rear network ports.

  How is what is used?

  The main use for NIC cluster is in a server/NAS environment. For the internet, it is of no use. Everyone today has a modem/router to connect with a cable or DSL provider and not supported is associated with the map NETWORK and bandwidth, you have with these providers is significantly less than a 1 only Go NIC can offer. It is only when you work in an environment of Server/NAS dual NIC is really advantageous. The speed to get the GB of data from or to the Server/NAS is actually doubled by partnering.

  Imagine that you need to send 100 GB of data on the server or NAS. In addition to the rounding errors, it would theoretically take about 14 minutes without balancing the load on the network, by partnering you would achieve 7 minutes in theory. In practice, these numbers will be higher. Teaming makes it possible to use assets in your projects that are stored on a NAS or a server, without dragging down the performance of the system. And of course, the NAS backup is twice as fast.

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• After the Server 5.1.5 upgrade network user cannot connect by most workstations

  Hi all

  Intro

  I upgraded one of my client of 10.6.8 Xserve server at El Capitan / app 5.1.5 server.

  The server is configured with the network homefolders and mobile homefolders. We also use PCS. The 10.6.8 configuration has worked perfectly and still doesn't work. But now it is time to move on.

  The upgrade process from was relatively smooth. I had to configure the interface network again, then check DNS (front / back) and I also had to re - install the SharePoint, including network sharepoint (via AFP) houses.

  Problem:

  Then, I started to test the connection as users of the network on client computers. I found that it was not possible to connect from most client computers.

  After entering the login credentials was refused immediately. As is the case when entering the incorrect credentials.

  On client computers, nothing has changed.

  Client computers running Yosemite 10.10.5 and some are running 10.6.8

  As soon as I reboot the Xserve 10.6.8 original that's all is back to normal.

  What does not work:

  Those who connect has worked well:

  • Mobile sync (on Unassigned Computers)

  • Log is as user network at home (on Unassigned Computers)

  • PCS worked fine. New settings have been made correctly. On all computers.

  • Automatically install some actions has worked well on all computers. It is a local administrator on the client computers. When connecting to the account, the network shares are mounted using PCS.

  • Resolution of the DNS of all client computers

  • DHCP works OK

  • Client computers running 10.6.8 seem to be not affected.

  At one point one of the workstations involved that did not work, started working.

  What I tried and not solve the problem:

  • Renew DHCP client

  • Removed liaison OD and put in place again

  • Trashed records managed preferences (these have been re-created correctly)

  Ideas on possible causes:

  The most logical causes of this behavior might be:

  (1) client computer cannot find the master OD.

  (2) the powers of negotiation fails.

  Since the Division of the OPPOSITION binding work, works PCS etc., the client computer is the master of the OD.

  The latter seems the cause more lickely. Ticketviewer does not show tickets. Ticketviewer by using the credentials of a user of OD manually requesting a TGT works very well.

  All advice is appreciated.

  Kind regards

  Nico

  Hi Nico,

  Maybe the problem is related to the AFP. Have you tried disabling AFP in Systempreferences and delete all shares. After this restart AFP and try to add shares again. Have a look at the access privileges. It is urgent to remove and re-add the userfolders on the server share.

  Good luck

  Peter.

• Tecra 8100: Don't know if the Network Port Replicator II is working properly

  I had a PA3017E-1PRP, i.e. a Network Port Replicator II, for my Tecra 8100. The fact is: I don't know if it works. I plug the computer in and no new material appears. At least the 3Com NETWORK adapter should be recognized, but no sign of life is presented at all.

  In addition, the USB ports does not work, but at least, the leds of the watch of the computer there is come from there because they show that battery is charging and the power comes from the DC.

  So, how can I check that everything works correctly? The computer is Windows XP SP2 installed, and I installed all the drivers and the support of the utilities (common modules, mobile and other extensions) util Toshiba USA and Toshiba Configfree of Toshiba Asia...

  Hi Toka

  I really put t know why you install software mix on your device. In my opinion, you should install European tools and utilities if you live in Europe. But if everything works it is also OK. I just want to make this comment because I don't know if all tools can consort with each other.

  As much I know this unit only is not supported for Windows XP Home in Europe. If the US page has mobile extensions for Windows XP Home edition, I assume that it has been tested.

  You can use a ports from there or all of them are dead?

• I use a server DNS Server 2008 and need to transmit the DNS lookup on a Linux server that only allows you to Port 3128 for DNS.

  Hello

  I use a server DNS Server 2008 and need to transmit the DNS lookup on a Linux server that only allows you to Port 3128 for DNS.

  How can I configure my DNS server to use this port for shipments?

  Thanks for your replies

  Marcus

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/threads
   
  Here are a few Server DNS forwarders. Links for refrence,
   
  http://TechNet.Microsoft.com/en-us/library/cc754941.aspx
   
  http://TechNet.Microsoft.com/en-us/library/cc731991.aspx
   
  I hope this helps.

• At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  original title: server and virus problem

  Hi SurajMendon,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.

  Networking platform

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Failure of XP logon to the W2K3 domain unless that network ports are enabled with already logged on workstation

  Fully patched XP laptop computer (Dell D630) cannot connect to a W2K3 domain, unless the network port is swapped with a workstation already on (connected) network.  Time and the computer name are all correct.  The name of the computer is in AD.  Am able to connect to the laptop using the credentials cached (without being connected to the network).  Can then connect to the network and manually map the drives, etc.  User account seems to be ok as well (because I can manually map).

  Have never seen this before. What could cause this problem and solve it?  I can't always share network with active PC ports.

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads