RAZR: Recommend recharging with a charger included.

Similar Questions

• Is Re: Satellite A500-17 X - it allowed to do work with the charger plugged?

  Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?

  I remember having a laptop earlier and 3 hours battery lasted only 30 minutes.
  This will happen to my Toshiba A500 computer laptop X 17 too if I had to plug my charger all the time?

  Should I get out the battery if you don't use?

  > Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?
  Yes you can do it and you should not be afraid that this will affect the battery!
  After that the battery has been recharged, the grief process stops and the battery is not looping
  My cell phone is always on the AC adapter at home and the battery is still OK and it work properly!

• I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I pressed the f1 key to continue, then my laptop recharges normally.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Seeing orange blinking after that stop with the charger connected.

  Hello

  I'm new here and I have the following problem.

  Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

  The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

  To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

  Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

  In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

  To describe the problem even once:

  Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
  If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
  Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

  I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

  Because I travel a lot, I love the little thing but I got frustrated at the moment.

  It would be great if I'm right, and someone already had this thing resolved!
  THX advance for any help!

  Peter

  Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

  I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
  Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

  I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

  Let's see what the other members of the forum think problem described.

• Smart album with face East/includes returns no results

  System specifications:

  2012, mac Mini, 16 GB RAM, Core i7, El Capitan, Photos v1.3

  I recently tried to create a new Smart Album with the following rules:

  Face is (OR includes)

  The date is in the range of 01/01/2015 to 31/12/2015

  Even though I KNOW there should be results, Photos Returns none. If I remove the filter from the Face, I get all the pictures of 2015, as you would expect.

  I have a Smart Album that is put in place as this for each year - previous have been imported into iPhoto, which was able to handle this without problems. When I tried to open these, all the pictures inside of them were no longer part of the album. They were always in my library, but were no longer in the Smart Album.

  If I try to create a Smart Album with face IS NOT and a range of dates, I get all the pictures of the year DO NOT include the person. Therefore, it seems that only try to INCLUDE faces is broken.

  I read a thread where someone had a similar problem and it has been suggested - apparently with some success - the filter of the Face has been changed to a text. I tried this and still have nothing.

  Is it a known issue on the Photos, is there a solution?

  The faces rule works on its own - a smart album with only 'face includes... '. » ?

  For me, it's the Face or Face includes constraint works well in Photos 1.3.

• I deleted all the games that come with Windows XP including Solitaire. How can I get that back?

  I deleted all the games that come with Windows XP including Solitaire.  How can I get that back?

  Hi andypily1,

  Welcome to the Microsoft Answers community.

  Try the steps one by one and check below.

  STEP 1:
  How do I add or remove games in Windows XP
  http://support.Microsoft.com/kb/307768
   
  
  STEP 2:
  In most cases if the games are deleted from the computer files will remain on the computer.

  I suggest that you are looking for game files in the system32 folder.

  Later, click on Start menu click on run and type c:\\windows\system32 in the following search of the window for the file of games like free cell. If you get the files in the system32 folder then copy the file to c:\\program files\start menu\ later in the game folder.

  STEP 3:
  If fails it above steps, try a system restore to the point when the game was available on the computer.
   
  See the link below to learn how to perform the system restore.

  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• PC does not work with the charger also

  My laptop is hard to give a beep, I know I need to change the battery, but the PC does not work with the charger also

  Original title: laptop Dell Inspiron M5030

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  Go to the Dell website and look at the specifications of your laptop to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  See you soon.

• If I charge my laptop with 21V charger, does it affect the device. the original 18.5V charger

  The product name is Compaq nx6310

  If I charge my laptop with 21V charger, does it affect the device. the original 18.5V charger

  Hello

  I not this, the variance is acceptable around more/less than 5%, in this case, up to 13%.

  Kind regards.

• I tried to buy the creative cloud with all the included applications and I wrote my bank details and its been "approving or looking" for my card for an hour.

  I tried to buy the creative cloud with all the included applications and I wrote my bank details and its been "approving or looking" for my card for an hour.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem with server-side includes

  Hi - I have a page with two php includes no longer correctly display. They were great when I got to the top, and I have not changed anything.  They are not displayed online - and also do not appear on my local server (Apache).  I have same code on other websites which display correctly, on my server and online.  There is nothing wrong with the paths to files as they will be displayed correctly on the screen of DW, and also on the live view, so I'm completely baffled.

  Anyone can shed some light?

  Here is an example of a page- http://www.lucidinsight.com/travelprev.shtml

  Understand that both should be displayed on the right side of the page (so the two error messages)

  Thank you!

  If it is hosted on the same servers that works? If I save a file .shtml with php scripts, it does not address on one of my servers. The other is classic asp, so I can not test it. But on that has php, ssi are not treated, but I do not get an error. I create a simple SSI and use the [an error occurred while processing the directive] on a test page and see if it works. Easy way to test what booth said.

  Jim

• Several Images with a charger

  I am trying to load and display multiple images with a charger, one after the other. The program displays only the last image to be loaded and added to the stage. What's wrong? Here is my code...

  ---START OF CODE---------------------------------------

  import flash.events.MouseEvent; Required package for mouse events

  btnGenerate.addEventListener (MouseEvent.MOUSE_DOWN, buttonPressed); Button click listener

  chkSeal.addEventListener (MouseEvent.MOUSE_DOWN, chkTriggered); Checkbox click listener

  If the check box is selected, go to 8 or 9 characters max

  function chkTriggered(event:MouseEvent):void

  {

  If (chkSeal.selected is false)

       {

  txtInput.maxChars = 8;

       }

  on the other

       {

  txtInput.maxChars = 9;

       }

  }

  function buttonPressed(event:MouseEvent):void

  {

  var pictureLoader:Loader = new Loader(); Variable image loading

  var plateText:String = txtInput.text; Plaque text string

  var filename:String; File name for each character of associates photo

  var currentX:int = 10; Current position x

  var i: int; Meter to be used in for loop

  plateText = plateText.toUpperCase (); Convert text to uppercase plate

  For each character in the sequence

  for (i = 0; i < txtInput.length; i ++)

       {

  filename = ' / numbers and letters / "+ plateText.charAt (i) +".png "; Generate file name

  pictureLoader.load (new URLRequest (filename)); Load the image

  addChild (pictureLoader); Add image to step

  pictureLoader.x = currentX; Move the image in position

  pictureLoader.y = 366; Position is constant for all images

  currentX = currentX + 52; Increase the current x (image size)

       }

  txtInput.text = "finished!" Display in the text box

  }

  -------------END OF CODE----------------------------

  You seem to have only a single instance of Loader works for you.  A charger can contain only a single charge at a time.  Try to create new Chargers in the loop.

• How to manage values of 'special' time with the charger

  Hi all
  
  I want to import data from Google Transit in a DB Oracle (version 11).
  My goal is to import the arrival_time and departure_time as a TIMESTAMP type attributes
  The file to be imported has the following structure:
  
  trip_id arrival_time departure_time, stop_id, stop_sequence, stop_headsign, pickup_type, drop_off_type, shape_dist_traveled
  3307886, 06:33:00, 06:33:00, 6606, 4,.
  3307886, 06: 34:50, 06: 34:50, 6596, 5.
  3307886, 06: 36:09, 06: 36:09, 6611, 6,.
  3307886, 06: 37:00, 06: 37:00, 6604, 7,.
  3307886, 06: 37:42, 06: 37:42, 6601, 8.
  3307886, 06: 38:24, 06: 38:24, 6612, 9,.
  ...........................
  * 3348800, 24: 47:03: 24: 47:03, 3031, 61, *.
  * 3348800, 24: 48:00: 24: 48:00, 4823, 62, *.
  
  The problem is that "BOLD" marked lines have a time value greater than 24, and this is not possible with the charger.
  
  In this case in the imported value the day must be incremented by 1 and time must begin with previousHours % 24.
  for example
  
  + 3307886, 06:33:00,-> 3307886,'1970-01-01-06: 33:00 ',... +.
  + 3348800: 24: 47:03-> 3348800,'1970-01-02-00: 47:03',... +.
  
  Thank you very much
  
  is there a way to do this with sql loader? If so, is there a way to say that for the charger?
  
  Thanks a lot for your help
  
  was soon Markus
  
  Published by: markusin on January 20, 2010 12:26 AM
  
  Published by: markusin on January 20, 2010 12:26 AM

  Hello Markus.
  If you download files from the server that depends on the database, using external tables is an excellent choice. If you download files from a server that is remote from the database, external tables is not an option and you need to use SQL * Loader.

  In both cases, you can create a function to be used for the processing of these data.

  Your command file may look like this (untested)

  LOAD DATA
  APPEND
  INTO TABLE target_table
  FIELDS TERMINATED BY ','
  TRAILING NULLCOLS
  (  trip_id
   , arrival_time         "CONVERT_TIME(:arrival_time)"
   , departure_time       "CONVERT_TIME(:departure_time)"
   , stop_id
   , stop_sequence
   , stop_headsign
   , pickup_type
   , drop_off_type
   , shape_dist_traveled
  )
  

  Your function might look like this

  CREATE OR REPLACE FUNCTION  convert_time
    (p_time_string  VARCHAR2)
    RETURN  TIMESTAMP
  IS
    r_timestamp            TIMESTAMP;
    v_day_increment        PLS_INTEGER  := 0;
    v_hour_part            VARCHAR2(2);
    v_rest_of_time_string  VARCHAR2(6);
  BEGIN
    v_hour_part           := SUBSTR(p_time_string, 1, 2);
    v_rest_of_time_string := SUBSTR(p_time_string, 3, 6);
    IF  v_hour_part = '24'
    THEN
      v_day_increment := 1;
      v_hour_part     := '00';
    END IF;
    r_timestamp := TO_TIMESTAMP(v_hour_part||v_rest_of_time_string, 'HH24:MI:SS') + v_day_increment;
    RETURN  r_timestamp;
  END;
  /
  

  During testing, I found that the current month and year will be used for the timestamp instead of Jan 1970.

  Hope this helps,
  Luke

  Please check the answer as helpful or response, if it is so. If this is not the case, further clarification.
  Try to always provide create table and table insert to help members of the forum to help you.

• Recharge with an iPhone/iPad car charger only

  I have a Honda CRV from 2015.  Suddenly, none of our iPhones will load with car chargers.  Two different Chargers, two different ports, lights, showing the power to the cables on the two, previously worked.  Our iPhones include a 6Plus, 6 and 5.   I rebooted my iPhone 6 with no result.  We travel a lot and it is a real drawback.  Any ideas?

  Thank you

  Paulette

  Since iOS 9, the new firmware on Apple devices also checks the accessory used, especially a 3-wire party, to ensure that the device will not be damaged material not approved electronically.

  Recharge your iPhone, iPad and iPod touch - Apple Support

  On iPhone, iPad and iPod accessories - Apple Support