Re: Create a recovery disk in Satellite L300 - 145 PSLB0E

Similar Questions

• Satellite L300 - 145 (PSLB0E) - missing graphics, LAN and WLan card

  Hello

  I have recently reinstalled windows Vista Home Premium but now I have a few missing drivers.
  The graphics card and Lan and WLan are missing.
  I download and installed the Lan and the controllers of the graphics card but I can not find the right WLan.

  The problem is that the USB WiFi card is not reconnized and shows as "unknown device".
  I looked in the property inspector and I found this product shows 2 id values: USB\VID_0BdA%PID_8197&REV_0200 and USB\VID_0BA & PID_8197 and at Port #0006Hub_ #0007 also, under the name of fisical object I find it \Device\USBPDO-9.

  I am not sure that this is the Wlan card, but since is the only thing that works properly, I think it is all. I tried intel antheros and drivers realtek, allways relocation previous no conflict would happen, but still nothing happens and windows still doesen't reconnize itm so

  If please, what is the name of the card and where can I find the RIGHT controller for her?

  Hello

  First of all really get you all the drivers for your laptop on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The drivers are pre-tested so I can't imagine that none of them work.

  On this site http://www.pcidatabase.com I tried this vendor ID but I can t find anything. Only with the device ID 8197, it shows a Realtek WLAN card so I guess you have to use this driver.

  Please check again! Make sure you have installed the SP2 at least and before you install the WLAN driver again, delete all other versions and clean the system using CCleaner.

• Need AC adapter / Satellite L300 - 145 PSLB0E CC

  I need power adapter,
  I m, leaving Portugal.
  I don't see where I can buy.
  Thosiba do not have a webshop in portugal to buy the adapter?

  Hello

  Toshiba does not all online stores, but you can buy all the parts of the service authorized in your country (portugal) partner.

  Here you will find a list of available worldwide aspic;
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  welcome them

• Re: A few questions about the Satellite L300 - 145 (PSLB0E)

  Hello

  I have a few questions that make me go nuts.

  1 - this laptop what chipset is actually uses? GL960 and GM965? Since it has 2 GB max ram I would say GL960, but that one is capped at 533 mhz and 667 mhz are the Rams came with the laptop. Also the name of drivers chipset gm965, said, I don't know if it's the name for the entire group of chipsets or if it's really a GM965. And also GL960 has no integrated graphics, but this laptop only, and GM965 has an integrated graphics card.
  to prove that I do things to the top you go here:
  [https://ark.intel.com/products/29830 | https://ark.intel.com/products/29830] GL960
  [https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller | https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller] GM965

  2 - if it's a GM965 why the computer only suports laptop 2 GB ram max, while officially the suports 4 GB chipset?

  3 - Why is there not a page on the website of toshiba (al less in the Web site code) which tells me the full specifications for this laptop, as if there is a page for others more recommended laptops?

  Post edited by: Kailido

  Your phone has Mobile Intel GL960 Express Chipset inside and can handle with 2 GB of RAM only and you can use the monitoring modules:
  1 GB-DDR2-667-PA3512U-1M1G
  2 GB DDR2-667-PA3513U-1M2G

  Unfortunately I can't answer your last question. This question is for Toshiba directly.

• Satellite L300-145 - BSOD appears if I installed 4 GB of RAM

  Hi all

  I have this Satellite L300-145 PSLB0E-03601LPT and I want to install 4 GB of RAM, but when I install 4GB on boot THEN BSOD appears.

  I try to change with the other memorys brand with equal modules, I'm trying to install Windows 7 64 bit, Linux 9.10 64 bit and it the same things. I try too update the BIOS but it the same thing.

  I think it's remapping feature memory on bios but does not have this option.
  So what I have to do?

  My laptop has now 3GB
  CPU: T2390 1, 533 Mhz 86Ghz
  CHIPSET: GM965
  RAM: 2 GB DDR2 at 533 Mhz
  HDD:Hitachi 200 GB

  After upgrade
  CPU: T8300 2.4 GHz, 800 Mhz
  RAM: 2 GB DDR2 667 Mhz
  HARD drive: Seagate 7200.4 250GB

  I really need 4 GB

  Hi mate,

  I m really confused now. As a first step, you wrote that you get BSOD if you upgrade to 4 GB, but the specifications after the upgrade are really different. You have a new CPU, RAM and HARD disk with another specification.

  Anyway, at first I checked the specs on the Toshiba website for your laptop and this model can only be upgraded to 2 GB; not 4 GB!
  This means that you can only use two modules of 1 GB in this notebook.

  Sorry, but you will not be able to use 4 GB in this model of laptop.

• Satellite L300-1AS - error when creating a recovery disk

  I am trying to create disk recovery for Sat L300-1AS,
  I tried a number of different DVD discs of high quality on DVD - R / DVD + R, but each time when the system checks the data, I get an error message 02016F - 3 c 00000000

  What am I doing wrong please help as frustration is really starting to kick now

  Thank you

  Hello

  Die get the error not fully compatible DVD disc.

  I created a recovery disk using the TDK DVD-R disc. Some people, he suggested too.

  I think that worth a try!

  Welcome and good luck

• Screen flickers on Satellite L300 and I am unable to create a recovery disk

  Hi all

  I just bought a model L300 PSLB0C 08R08C number.
  I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

  I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

  Second issue with this device, the screen flashes once whenever it is in a shutdown state.
  Number 3, the wireless card disappears from the Device Manager, until I restart.
  Laptop made in China ;-)

  Any suggestions are much apprecaited

  Hello

  It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

  regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

  Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

  concerning

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• Satellite L - how to create a recovery disk?

  Hey,.

  I accidentally uninstalled the program "Recovery Disc Creator". But the folder with Win Vista Recovery disc information are still in my computer. Now, I want you help me in creating a recovery disk. My system is very unstable. So I want to re install. I hope you can help me.

  Sorry, but why did you uninstall the recovery disk creator?

  However, now you can not create the recovery disk because you have uninstalled the program to create the disc.

  The only way I know is you use HARD drive recovery option to reinstall your laptop. You can use it if you go to the advanced boot menu (F8 before Windows starts), choose repair my computer, and then select the Toshiba HDD Recovery feature.

  Normally you get this message if you start your laptop on first use:

  + Important INFORMATION +.
  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite A300D - create a recovery disk

  Hello
  I have a Toshiba A300D. Recently, I installed the version BETA of Windows 7, wiping my installation of Windows Vista on my laptop, now I don't want Windows 7 more and wants to return to Vista. I still have the recovery partition in drive D, but I don't know how to be: create a recovery from this disk or restore using this straight from the trunk. I tried pressing F11 at the Toshiba flash at startup screen, and who just go to a screen that says "Windows could not start...". "etc, I also tried to go to the Multiboot menu and selecting HDD2, and who does not work either.

  So can someone tell me how I can restore back to Windows Vista, I'm not taken worth losing data as I alll backed up on an external hard drive.
  Where can I get the Toshiva Recovery Disc Creator software anywhere?

  Hello

  He's a bad friend... usually it is not possible to restore the laptop on the factory (in the image of Toshiba) settings if you have removed the Vista HARD drive and not create the recovery disk...

  The recovery disk is THIS essential disk and must be created at the beginning!

  But maybe you're a lucky guy...
  I found this thread with a nice tutorial posted by forum user.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=164927&

  I didn't test it and I don't know if it will work, but I think you're last option... otherwise, you will need to order the Toshiba recovery disc.

• HDD Recovery Fail on Satellite L300 Vista

  I'm arrogant and not install virus protection software and eventually get drowned in the spyware rather than go through the hassle of trying to remove each of them so that they slow down the computer to a halt, I decided to restore the factory State.

  It seems easy, but now after the first part (a command window with a percentage) he told me that he had no HARD drive recovery.
  What can I do now that I can't use my computer, I don't have a Vista disc because Toshiba has asserted that I could recover from the hard drive I could use XP if there is no quick fix I have a drive for this, but how easy is it to find and install all the drivers, incidentally It's a Satellite L300.

  I have no idea why the recovery partition does not work that way, while the guys do you recommend I do?

  Thanks, man.

  > It seems easy, but now after the first part (a command window with a percentage) he told me that he had no HARD drive recovery. What can I do now that I can't use my computer, I don't have a Vista disc

  Have you tried to start the HARD drive recovery?
  Simply press the F8 key after laptop powered upwards and choose fix my computer.

  Usually, this will help you start the recovery disk again.

  If this is not possible then you will not be able to recover the laptop without the Toshiba recovery disc.
  He really stupid situation if you didn't create the recovery disk before this problem happened :(

  Well, your last chance would be this site:
  https://backupmedia.Toshiba.EU/landing.aspx

  Here you can order a new Toshiba Vista recovery disk

  Good bye

• Cannot create a recovery for my Satellite A300-1BZ CD

  I tried to use the Toshiba Recovery Disc Creator repeatedly and with many different brands of discs to create the recovery disk.
  However each time as the laptop is about to finish burning the disc, there is an error and the operation not can be completed.

  I don't think there is a problem with the drive as I have used for many other things including watching movies without problem.
  Could Toshiba please send me a recovery disk instead?
  Thank you

  > Could Toshiba please send me a recovery disk instead?
  A mail recovery disk? Very interesting. Mailed 4 GB image is not so easy.

  I don't know what you're doing, but if you want good tip then use Verbatim or TDK DVD-R blank media. For the DVD-R.
  I have too many Satellite A300 and recovery DVD, I created successfully.
  Do you use DVD-R virgins too?