Satellite A300D - create a recovery disk

Similar Questions

• Satellite A300D - creating recovery disk problem

  Hello.

  I have Toshiba Satellite A300D-11 t (extended A300D-11) and I would like to create recovery disk. Problem is that I can't run the Toshiba Recovery disk creation tool. There is no shortcut in the start menu.
  I tried to run Program Files.

  Program itself exists (or at least I think it does), there are files in the Program Files folder, in "Programs and features" program is also so I could remove it.
  Simply click on the file TosRDC.exe (or any other file *.exe in this case) and it does not start.

  For memory - recovery partition exists and has not been changed.

  System - Vista Home Premium 32 bit.
  What should do?

  Hello

  I would say to pick up the machine from the disk and then, immediately after the machine, you should try to create a recovery disk. It could be that something in the meantime destroyed some piece of software in your operating system that could be the reason of this problem.

  Maybe not a very elegant solution but the only one that works every time.

  Welcome them

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• Satellite L - how to create a recovery disk?

  Hey,.

  I accidentally uninstalled the program "Recovery Disc Creator". But the folder with Win Vista Recovery disc information are still in my computer. Now, I want you help me in creating a recovery disk. My system is very unstable. So I want to re install. I hope you can help me.

  Sorry, but why did you uninstall the recovery disk creator?

  However, now you can not create the recovery disk because you have uninstalled the program to create the disc.

  The only way I know is you use HARD drive recovery option to reinstall your laptop. You can use it if you go to the advanced boot menu (F8 before Windows starts), choose repair my computer, and then select the Toshiba HDD Recovery feature.

  Normally you get this message if you start your laptop on first use:

  + Important INFORMATION +.
  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite L300-1AS - error when creating a recovery disk

  I am trying to create disk recovery for Sat L300-1AS,
  I tried a number of different DVD discs of high quality on DVD - R / DVD + R, but each time when the system checks the data, I get an error message 02016F - 3 c 00000000

  What am I doing wrong please help as frustration is really starting to kick now

  Thank you

  Hello

  Die get the error not fully compatible DVD disc.

  I created a recovery disk using the TDK DVD-R disc. Some people, he suggested too.

  I think that worth a try!

  Welcome and good luck

• Screen flickers on Satellite L300 and I am unable to create a recovery disk

  Hi all

  I just bought a model L300 PSLB0C 08R08C number.
  I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

  I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

  Second issue with this device, the screen flashes once whenever it is in a shutdown state.
  Number 3, the wireless card disappears from the Device Manager, until I restart.
  Laptop made in China ;-)

  Any suggestions are much apprecaited

  Hello

  It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

  regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

  Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

  concerning

• Satellite P300 - 13 M - recovery disk do not work

  Hello

  I have a Satellite P300 - 13M. I want to reinstall my Vista, but the recovery of the program disk do not work.
  I do not have to uninstall the program, it is also on my list of software. I can see the program in C:\Program Toshiba Toshiba Recovery Disc Creator, but when I click on ToRDC.exe it does not start.

  These are all the files in the map:

  13/08 / 2008 17:30 < DIR >. +
  13/08 / 2008 17:30 < DIR >... +.
  28/02 / 2008 20:49 < DIR > Img +.
  19/03 / 2003 13:14 msvcp71.dll + 499.712
  21/02 / 2003 21:42 msvcr71.dll + 348.160
  30/10 / 2006 08:27 tdcmdpst.cat + 7.958
  27/10 / 2006 23:36 tdcmdpst.inf + 4.093
  18/10 / 2006 11:50 tdcmdpst.sys + 16.128
  11/03 / 2006 03:30 122.880 TDComSet.exe +.
  21/11 / 2007 17:09 TDMSTING.dll + 262,144
  21/11 / 2007 17:23 TODDSrv.exe + 129.632
  12/06 / 2007 13:59 1.212.416 ToRDC.exe +.
  + 14/02 / 2006 16:23 TosChk.dll + 57.344
  24/06 / 2007 19:39 TrdcHelp.html + 9.657
  25/10 / 2005 08:53 VXBLOCK.dll + 28.672
  + bestand (en) 2.698.796 12 bytes +.

  I also have the map on E:\HDDRecovery with all the files in it (4.12 GB).

  Is there a way that the program works or can I make HDDRecovery map an ISO image and burn it to a cd?

  Hello

  > I do not have to uninstall the program, it is also on my list of software. I can see the program in C:\Program Toshiba Toshiba Recovery Disc Creator, but when I click on ToRDC.exe it does not start.
  Sorry for my question but what you want to do exactly?
  You want to retrieve the laptop using the recovery disk or you want to create a recovery disk?

  The Toshiba Recovery Disc Creator creates the recovery disk using files in HARD disk recovery file that is placed on the second partition.

  If you want to recover the laptop, then you simply boot from the recovery disc.

• Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

  Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

  Original title: windows xp absence of 3.5 diskettes and Backup Assistant

  Hello JohnAdams2461,

  You're right, that Windows XP requires a floppy drive to create the recovery disk.
  Most newer systems do not have a floppy drive.

  View information in a previous thread with the same question.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

  Best regards, k

  Marilyn

• Creating a recovery disk

  Hi, my question is a little General, and I think that specific info on my laptop is not relevant. It is a HP, come to buy, and I want to create a recovery disk. I have seen that I have the opportunity to create it on USB or DVD. Here's my question... I have an external drive, which already have some data in it, but I have a lot of free space. Can I use an external hard disk to create a recovery instead of a USB disk? Any suggestions really appreciate it.

  Claudiu sincerely

  Claudiu Hey,.

  I couldn't guarantee it would work, but you can try to partition a space about 20 GB and using the following guide for it. This method would not be my first choice, only because I don't want to risk losing other data that are on this hard drive, if something is not right with the partitioning/formatting process.

  It might be more convenient to use a USB flash drive to do first and then create a partition on your hard drive and copy the USB flash content to the reader on this partition using Acronis or similar program. I strongly suggest to backup other data on this hard drive storage cloud or temporarily on the hard drive of your computer, just in case something goes wrong. Let me know if you have any questions

• Create the recovery disk

  I have a pavilion dv6 Windows 7 and he needs a reconstruction. It doesn't have a D: partion but I wanted to play it safe and to create the recovery disk set in case there was a problem with the drive D. I bought some Maxell dvd + R disc but are not accepted by this utility.

  According to the utility I use either + r or - R disc, why did he not accept

  Thanks for any constructive help

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Go to 'Support & drivers' at the top of this page. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Recovery media should be listed as an option to purchase, if you live in the United States / CA. usually around $17.

  If a recovery media is not listed, use the link that I posted above to get the phone number. Often if you support your software fails to create the set they send a free of charge.

• How to create the recovery disk

  Hello

  can someone help me create a recovery for my laptop Hp Pavilion G6 disc - 2330 m

  Windows 7, 64 bit.

  After inserting a dvd, I went to all the programs/maintenance/create a system repair disc

  but it gives the following error:

  The system repair disc could not be created

  The parameter is incorrect. (0 x 80070057)

  I posted earlier on my laptop freezing and respondent very late in command. I decided to create a recovery disk but have resulted in this issue.

  Help, please.

  Concerning

  Maury

  I suspect that the operating system on your laptop is probably not an OEM copy because of which the Recovery Manager is not available

  FYI, if the Recovery Manager was available, you can restore (restore your laptop back to the factory State) without the need to create recovery discs. The D:\ disc that is the recovery partition that would help you to do on your laptop.

  Try these steps and see if it works.

  1. click on Start button and type "devmgmt.msc" without the quotes and press ENTER key

  2. right click on the drive D:\ - HP Recovery partition and select Mark Partition Active.

  3. what would give you an alert/prompt, where you must choose Yes brings you to the Recovery Manager screen and restart your computer. You can follow the link that I provided above to start the process of recovery on your laptop.

  Note:

  Please backup your files before recovering on the laptop that it would result in the loss of data.

• What card SD size should I expect create a recovery disk?

  I just bought an inspiron 11 3000 series 2-in-1 for my son to school.

  God knows, it will probably load tons of stuff on him that will finally it slow down for analysis and I will need to freshen up before the road of the school year.  So, I want to create a system for her drive until it begins to use it and I want to use a cool map only for that, so I can keep them safe and not have it used for something else.

  What is the size of a disk I need create this recovery disk and system?  I used to use only the old CD, but it was at the time where I really was just reinstall the generic Windows and don't care about the drivers and others for my desktop PC.  I want to keep his laptop pretty much OEM factory to make our lives a little easier in the long run.

  A 8 GB would be plenty for this?

  Thank you

  This flash drive will be dedicated to the backup, if anything more than 16G is wasted. 64G may be a best value in general, but in this case, I recommend the thumb drive 16G cheaper than you can find, and I would also like to make two just to be sure.