Re: Delay Microphone Equium P200

Similar Questions

• Compatibility with Equium P200 RAM

  Hello

  Is PC2 - 6400 S-666-12-1E with Equium P200-1ED compatible?
  I don't know that I asked before I bought it, but now it does not start. So I want to know if it is because they are defective or got bad advice.

  Thank you

  H Jacke

  It is not easy to give you the right answer because Toshiba offers info on the RAM modules tested only.
  What I found in the specification is information that your machine can be upgraded up to 2 GB of RAM and the compatible RAM modules are:
  1 GB-DDR2-667-PA3512U-1M1G > Kinston KTT667D2 / 1 G
  2 GB DDR2-667-PA3513U-1M2G
  512 MB DDR2-667-PA3511U - 1 M 51

  Unfortunately there is no information about the other brands. You can buy it and test it. If there is a compatibility issue just return it.

• Processor upgrade and Equium P200-1ED

  Hello

  I installed an SSD of 64Go and installed Windows 7 with the user and the data folders program on a SD card installed as USB key into the Expresscard slot. I also put in 4 GB RAM

  It is still slow to navigate the Web through wired Ethernet. So I plan to upgrade the processors as the neck of the bottle seems to be permanently on the processor which is a T2310 Dual Intel @1.46 GHz.

  So the question is what is the next possible CPU upgrade?

  Thank you

  Update CPU has no influence on the Internet.
  It's done.
  If you have a slow internet connection, check the flow of data to your internet provider.

  Regarding the upgrade of CPU:

  Upgrading the CPU is certainly not supported by the laptop manufacturers. But this does not mean that another CPU would not work. A lot of people here in the forum attempted to upgrade the processor and in some cases, it worked.
  It will be important to know which chipset was built in this Equium P200-1ED.

  I m not very well, but I guess that its Intel GL960 Express Chipset. Please correct me if I m wrong the chipset must support the new CPU, otherwise the new processor cannot be used.

  Page Intel ARK provide information on supported processors
  http://Ark.Intel.com/products/29830

  In addition the new processor must be supported by the BIOS. If the BIOS would not support new CPU, the laptop would not start even if the chipset would be compatible with the new processor.

  As you can see, the CPU upgrade isn't easy because of pending issues concerning the compatibility issues between different parts for laptop.

  By the way: I am wondering about the upgrade to 4 GB RAM because this device should support max 2 GB of RAM

• Re: Equium P200 close issue with Vista SP1

  My Equium P200 seems to have developed a problem when stopping down.

  If I select 'Shut Down' option in the Shut Down menu then all revenues, but while the laptop restarts itself and there will be a 'blue screen of death' teling me he does a memory dump physical.

  When it is complete Notepad starts and there is a message saying that Windows (Vista SP1) has recovered from a serious problem.

  Any ideas on how to fix?

  Thank you

  AFAIK SP1 could create serious problems because of the problems of compatibility between some drivers and tools.

  Have you noticed the same issue without SP1 installed?

  I think you should check this!

• Equium P200 with WXP, no ACPI

  Hello

  I recently bought a new HARD drive to replace the Vista operating system.

  I used nlite to make an iso of the drivers SATA, SP2, and XP Home.
  I installed XP, SP3 and then all the drivers concerned from Toshiba. Especially the PC is fine, but I have a couple questions.

  They are:
  1 button will turn PC on or off, but not shut down the OS before turning off.
  2. when I stop XP I get the message (Win98), "it is now turn off your computer"! (Both of these may be (?) related).
  3. in eating patterns Options\Power I have only the possibility of the turn the HARD drive and monitor and then in the Advanced tab at all no options!
  4. with the exception of point 1 I have no control of the any of the other easy access above the function keys buttons. Toshiba controls are configured but do nothing!

  I studied these problems and it would seem that the APCI perhaps the corupt? I can't find any mention of ACPI in the BIOS (Phoenix V2.3). Also, I can't find any reference to ACPI in including hidden devices Device Manager! It was also suggested to upgrade the BIOS to ACPI compatible version?

  The only clues I can give, is that even if the pilot pwrsav the pwrsav driver installed OK - in twice caused a fatal error (BSOD) on the PC. To restart, as Toshiba Power Saver icon in Control Panel, but the opening gave me a Fatal Exception error message. I then restored the system to remove the program.
  In my opinion that ACPI and energy savings are related, please inform me if I am wrong. (Items 1 to 4 can all be linked)?

  XP has apparently ACPI capabilities but I can't find anything on the PC in this regard.
  With Vista that I had no problem with mentioned previously not mentioned and everything worked perfectly.
  Your help would be much appreciated...

  Hello

  It seems that the Toshiba UE driver page provide a special Win XP BIOS version 5.40 for Equium P200.
  If you are using Win XP, its recommended to use this BIOS.

  In addition, the page provides the pilot Power Saver Power Saver utility for Win XP.
  You must install both have additional food options.

  The commands and controls driver must be installed so that the functionality of the multimedia buttons.
  Hotkey Utility for Win XP manages the FN keys.

• Equium P200 1ir - where can I buy cable LCD screen

  Hi all

  I have an Equium P200 1ir and my screen has been crazy, color errors everywhere.
  I followed the problem down to be a cut wire in the cable of the internal lcd screen.

  My question is: where can I buy a cable lcd screen replacement for this machine that the screen itself is fine.

  I have searched all over the web and have had no joy. If possible can someone Toshiba advise me to buy the lead...

  Thanks in advance

  Antony

  Hello

  All laptop parts can be ordered from a local Toshiba authorized service provider.
  The ASP in your country should be able to help
  If these cables is not available or not on stock, then guys would be able to order this Toshiba head stock

  Have a look here to find all of the ASP in the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

• Equium P200-1ED is capable of powering connected on USB devices?

  (1) possibly associated with my previous question - what is someone able to confirm if the Toshiba Equium P200-1ED is able to power external devices connected via its USB ports?

  (2) all 6 USB ports can supply simultaneously 6 external USB devices?

  What's wrong?

  Please notify.

  I assume you ask again for advice related to this issue:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=115026#115026

  To my knowledge, all USB ports supports the USB standard and provides 500mA.
  But sometimes a USB device requires more than 500 my and then you will have to use an external power supply for the USB device.

  Sometimes it s advisable to use a USB hub that supports clean power.

  (2) can all be used 6 USB ports to power simultaneously 6 external USB devices?
  As I said, the external USB devices possibly some 3rd would need more like 500mA and in this case, you must use an external power supply to USB devices.

  Good bye

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• Equium P200-11R: two different processors in my device manager

  Hello
  I have an Equium P200-11R.
  When I look at the system, the processor is shown as «Intel Pentium Dual CPU T2330 @ 1.60 GHz»
  However, in the Device Manager under processors I find; "Intel Core Duo CPU T7300 @ 2.00 GHz", then "Intel Pentium Dual CPU T2330 @ 1.60 GHz!"

  Why is there another treatment showing, (T7300)?
  I am extremely confused.

  Best regards

  Hi dude

  Don t you worry it s a bug of Vista simply.
  You must remove the CPU from the Device Manager, and then restart the laptop.

  After the reboot of the new Vista will recognize the NECK properly!

  Best regards

• Drive D on my Equium P200-178 suddenly disappeared

  I have an Equium P200-178 and for some reason any my d drive disappeared all of a sudden, I tried to download/update drivers only to be told that the driver I have is more up-to-date.

  It gets very frustrating, because it means that I can not read cd or dvd on my laptop.

  Anyone out there who can give me advice?

  Reader is missing in Windows Explorer?
  What is the status in Device Manager?

  Try to please to solve following the advice on http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Updates in tempo Equium P200

  Hi new to this forum... got the Equium P200-178 since last year and everything was very well, how ever I downloaded the program Tempo which alerts me up to dates, but when I supported the update for my computer, extract the files then run update the computer some how will then says that it is impossible to install the program on my computer. Y at - it anthing I could do wrong. Any help would be great.

  Thanks in advance.

  Hello

  To be honest, if your laptop works well and stabile, you need not update. The single update can be useful, and this is the package of added value.

  By the way: you tried to install updates?

• Re: Equium P200-1ED: missing wireless

  I have a new Equium P200-1ED and it drove me crazy how he could hang with Vista then I reformatted and had to create a cd with nlite xp and I installed SP37005 after installation of xp pro that I don't see anywhere wireless connection.

  Intel wireless lan identification utility: says no wireless LAN hardware is installed or the utility could detect it not so installed. ?

  Hello

  I guess that you´ve has installed all the drivers on the Drivers Toshiba download site. A suggestion on my part:

  Go to www.intel.com, and download the latest LAN driver wirelessly from their site. Try it with this driver and give some feedback if it worked or not.
  Usually, the card should work with the drivers intel authentic.

  Good bye

• Equium P200 - several identical directories (void) & inappropriate content

  Vista Home overcharging was preinstalled on my computer Equium P200.

  I found that multiples with the same name (sub-) directories are created over time without any input (obvious) myself.

  Different, although files may contain these directories with the same name (void) identical (subsubdirectories).

  I tried to remove the (seemingly) redundant directories (void), but over time, they reappear.

  Also, I noticed that the shortcuts/files to move or disappear from directories (void))

  For example, until a couple of days, that I had a set of favorites in a subdirectory under (my) user directory - the subdirectory "disappeared" as well as shortcuts.

  As a secondary issue, I tried different ways to test my system - system restore; Memory; Hard drive; SFC system, but nothing seems abnormal, except that-
  the System File Checker, said that she could not solve a few flaws and that he had put the details in a log file. Unfortunately, no matter what I do I can't open logfile - the system of the forbidden even if I am registered as an administrator.

  The only thing I did is to use the sine of ease of startup repair I don't know what are the implications of this option.

  All the suggestions and help would be appreciated

  concerning

  Hello

  According to your message you absolutely don't know what directories (void) this is and what software has created this directories.

  I think an application or software that is installed on your laptop can create these files/directories as a windows update does things

  In individual cases, these files/folders are only for temporal use. In this case, you can remove this
  I m using a free tool called CCLeaner. It cleans the registry of BONE and temporal files stored on the HARD disk.
  Maybe you should test it

• Cannot install Vista SP1 on Equium P200

  Says Windows installs, then stops, starts to set up, but then returns the changes. Anyone else had similar and then successful problems to install. This on windows vista edition Home premium 32-bit on Equium P200.

  Checked for all the updates on Vista, perfectly up-to-date. Also stop Firewall etc. Can someone help with this problem?

  Hello

  It's funny you say that, because my friend has exactly the same problem as you! (but is not on a laptop, on a standard desktop configuration).

  When the service pack installs it checks for incompatible software during installation. What I would recommend would be to backup your data and install Service Pack 1 _directly_ after recovery of product and then install the 3 rd party software you want to install.

  (Especially the burning of programs/language packs being installed), I found that this has harmed the configuration causing the cancellation of the installation.

  If you give that to try and see what happens and if it doesn't work then come back and we can see what it can be.

  When my friend re-installed Windows and the Service Pack because it worked, allowing him to install its own software on top.

  Installation/Recovery > all Windows updates > Service Pack 1 > 3rd party software

  I hope this helps

  Kind regards
  Nukey

• Equium P200: realtek ethernet adapter Linux installation error

  I have an old Equium P200 - 1Ed, who started to play up.

  When I try to install Linux, it gives me an error for realtek ethernet adapter and I studied the problem on the forums.

  Apparently, my hard drive is old and decrepit.

  I tried to reinstall Vista from the default Toshiba CD, just out of curiosity, and installed fine, except, seemed unwilling to connect internet.

  Tried Linux, but still the same problem from realtek.

  Apparently I can download the driver bios flash and try to reinstall the bios... it looks like my last hope.

  Anyone know where I can get the bios driver for P200-1ED?

  Updates to the BIOS, you can find on toshiba BIOS support page - http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp

  To be honest I don't know if the BIOS update will help with the installation of Linux, but you can try it.