Re: Double question Z3

Similar Questions

• Make the double question mark average in a registry entry as------? \C:\WINDOWS\system32\drivers\

  In my registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eabfiltr

  I see double points to mark that precedes the file name in the entrance to the path of the Image:

  Image path = ? ------C:\WINDOWS\system32\drivers\EABFiltr.sys

  They appear on a number of other drivers - I checked, some drivers with double question marks are signed, others are unsigned, which doesn't seem to be not that it.  The drivers are present and operational system.  Is there something special that means?  I couldn't find anything definitive in Google or Bing.

  That said, it does reference to a directory of temporary names created by windows at startup, does not sound like a sign of boredom

  http://help.WUGNET.com/Windows/registry-entry-path-preceded-ftopict630476.html

• Cast a double questions

  I have a program that reads a variable number to a text of the point number file has the values of 1.0, 1.1, 1.2 to 1.9. I need to separate the integer and decimal number in 2 ints part. I have the code that works for most of the numbers unless the number is 1.2 or 1.4, these two numbers to break the code. I developed a small stand-alone simple program to separate the numbers from 1.0 to 1.9 and print the results and I see the same thing with the cast works only not for the numbers 1.2 and 1.4. My program is attached. When I run it I get the results in the lower output file. 1.2 double gets converted to 2.00000000, and then when I catalogued it int I end up with 1 not 2. I have this same problem when I start with a double from 1.4

  a duplicate of 1.000000 makes an int 0 with tmp 0.000000
  a duplicate of 1.100000 makes an int from 1 with the tmp of 1.000000
  a duplicate of 1.200000 is an int with the 2.000000 tmp 1
  a duplicate of 1.300000 made a 3 with the tmp of 3.000000 int
  a duplicate of 1.400000 makes an int of 3 with the tmp of 4,000,000
  a duplicate of 1.500000 makes it a 5 with tmp 5.000000 int
  a duplicate of 1.600000 is an int of 6 with the tmp 6.000000
  a duplicate of 1.700000 is an int of 7 with 7.000000 tmp
  a duplicate of 1.800000 made an 8 with the tmp 8.000000 int
  a duplicate of 1.900000 is an int to 9 with 9.000000 tmp

  > a double of 1.200000 is an int from 1 with the tmp of 2.000000

  classic problem of the representation of float.
  What you really have is 1.9999999999 instead of 2 in tmp, so casting
  gives you 1.

  There are many ways around it.
  The smiplest is to change
  Answer = (in)(tmp+0.5);
  who take a walk instead of a trunk.

  Or convert double-> the string that you already do and choose the ints from him.
  --
  Guillaume Dargaud
  http://www.gdargaud.NET/

• Double question monitor via the desktop client

  I have my test group of users on their existing desktops with two monitors connect to Windows 7 VDs via the customer to view.

  Dual screens works fine, but with a minor problem:

  When you first connect the VM display spans the middle of the two monitors. Once connected, if you log out of the desktop computer, then reconnect, it will correctly install two monitors.

  Anyone know why this is happening or know of a fix? My test users are frustrated by it because it takes more time to go in the morning and some like putting icons on their extended desktop. They keep reallocation to the main display.

  If we go with the environment from the view, I use thin clients, but I want to go as well as possible and tests to reproduce the customer environment light as much as possible.

  Thank you.

  I'm sorry to hear that you're having these problems. Here are some links to help I hope configure you PCoIP without the problem you are experiencing:

  VMware KB: Configuration for use with view 4.0 PCoIP

  PCoIP VRAM Fix

  It might be useful to completely reconfigure your model with the process described in the methods/settings from the links above.

  The only time where I got problems of calibration screen was before I did the PCoIP VRAM fix discussed in the 2nd link above.

  I hope that these help. We were very pleased to see once it has been implemented 100% correctly. This is a very new technology, so it takes some time to learn it.

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• Double question of accession

  I have two memberships a staff for the work. I tried to install a program from the accession of my work to my computer at home. When I tried to do, the cloud destop application Adobe has not changed to look like what I had to work. He always showed my personal membership. I want to keep these two memberships in my personal computer. How can I do?

  Hi WAandDFS,

  Please see the Ko: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html .

  Kind regards

  Romit Sinha

• "Please ignore": double Question: PROBLEM of BACKUP RMAN

  Dear Sir.
  
  I learned that the RMAN backup command shows if a backup happened to own or not to for example:
  
  
  RMAN backup report
  SESSION_KEY INPUT_TYPE STATUS START_TIME, END_TIME MINUTES
  1079 FINISHED ARCHIVELOG 03/01/10 08:14 03/01/10 08:46 32.12
  1072 DB FULL FAILURE 03/01/10 04:09 01/03/10 07:56 227.65
  
  The rman backup command shows that there no full backup of the DB:
  
  The new order of 10g that gives me this info is provided below:
  
  Select SESSION_KEY, INPUT_TYPE, STATUS, to_char (START_TIME, ' dd/mm/yy HH24') START_TIME, to_char (END_TIME, ' dd/mm/yy HH24') END_TIME, round ((end_time-start_time) * 1440, 2) Minutes of SYS.v_$ RMAN_BACKUP_JOB_DETAILS order by session_key desc;
  
  
  My alert doesnot log tell me there's an error during backup how to check my status of full DB backup as to why told you can't...
  
  Kindly help
  
  In addition I also have Oracle 9i DB but we do not have a simple command like the above in 10 g that gives me a situation report that says for DB Backup went well or not your help will be much appreciated
  
  
  Concerning
  
  Published by: user8764012 on January 3, 2010 13:29

  Please change the subject here line "Please ignore".

  I thank you, in the future, no announcement only once and only in a good group.

• Question of the motherboard for M58p Tower

  Hi all

  Have a question that I think will work but need anyway to confirm him. On the motherboard of my computer, I have what seems to be 4 sata connectors. 1 orange, the others are red. I intend to have 4 sata devices hung; 2 hard disks and dvd drives/burners 2. Watch here:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-71086&selectarea=support&tempsel...| ThinkCentre 20M58p % | 6138 & family = 20Desktops % Lenovo | ThinkCentre 20M58p & = 20Desktops % Lenovo machineType % | ThinkCentre 20M58p % | 6138

  He says that orange is an esata connector. Now, what I can say and tried to google, I think you can use a sata device in this place.

  Double question. Is it indeed possible and has anyone done this or done this?

  Thank you!

  OK, thanks for the reply. I just wanted to make sure before I made using a device sata off of him.

• Podcast image does not refresh

  Before anyone called it a double question, knowledge that I searched carefully support section for an answer.  I've seen a solution that the image should be 1400 x 1400 px.  I noticed the power supply must be updated with a new episode, before that change is picked up.  The two things I tried, two things have not worked.

  I've updated my art of podcast to an image 1400 x 1400 on SoundCloud, where my podcast is hosted.  When I play an episode of podcast on iTunes, the new work of art appears on my phone with the episode.  However, in the iTunes STORE when searching for my podcast, my old image remains.

  Is there a way to trigger that the iTunes store for re - indexing its cache of images, so that my image of podcast is updated?  For your reference to see, it's ' you heard it here second ' by Derek and Steve.  You are looking for one that will show you the podcast, but you will notice that if you actually play an episode, the work is updated.  Is not updated in the store or on the iTunes podcast page.

  Any advice?

  Thank you

  Derek

  Your iTunes Store page is at https://itunes.apple.com/gb/podcast/you-heard-it-here-second/id1063550166?mt=2

  Your feed is at http://feeds.soundcloud.com/users/soundcloud:users:57682175 / sounds.rss

  (Please always post these when you have a question to save detective work).

  The image in the store is from the tag "tunes: image" at the top of the food: yours is to

  http://i1.sndcdn.com/avatars-000207787673-800189-original.jpg

  This image complies with the requirements. It may take a few days for a new image appear in the store: and it is important that when you change the image you change the file name, because the store put in cache the image and if the name of the file remains the same she has way now of knowing that he's changed. As long as you have changed the file name, it is just a matter of waiting. If you do not, of course you should do.

  I don't know how the podcasts iOS application handles images, but it seems like he knows that image files incorporated into the media - all except the most recent episode have these images embedded showing the new version. They appear when the Subscriber in iTunes. During playback of an episode in the store of the image in the "tag" in each item tag should show (on the bar top, very small), but it has not yet updated, either - the food has the most recent version. Again, it is probably just a matter of waiting if you have changed the file names.

• Mac telling Me to install OXS?

  Hello everyone.  This may have already been dealt with elsewhere.  I spent a lot of time looking for this forum before you type it just to make sure that this isn't a double question/discussion and he couldn't find so forgive me if it is a question/problem of repetition.  I have a 13 - in the Macbook Pro mid-2010, bought in November 2010.  Maybe this is a sign, it's time for a new computer (?).  Situation: I was on my laptop last night and it was very good.  A little slow at first, but after a start restarting/safe that it functioned well.  I had slow since upgrade to El Capitan.  In any case, I jumped on the baby this morning and this is what happened:

  1. when the Apple logo should be was crossed circle.

  2 logo appears, start as usual

  3 screen saying men start installing OXS.  US flag in the upper right corner, 'English' upper-left.

  Basically, it's the screen that appears when brand new computer and you have to go about setting it upward from zero, so-to-speak.  Immediately, I panicked and stopped and restarted.  Restarts, it's all came fine, connected, all my files and it - steps were always on my desktop (thanks universe), nothing has been deleted, and so I immediately came here to type this note on you.

  Someone has an idea what the Hay, all this topic?  I don't know if this is a sign of anticipation of something more sinister on the horizon or what.  I must say I'm not too happy with El Capitan, or if it is still the cause of it.  And I don't know if that means it's time for a new laptop.  This computer is in excellent shape and I took great care of her.  Be afraid now. Help, and even if you can not thank you for the reply.

  Download and view a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Your Mac may have connection problems HARD drive or HARD drive.

  Also run Apple Hardware Test.  Using the drive with AHT on written instructions accompanying your MBP.

  Note that an error free AHT is inconclusive.

  Ciao.

• I can't install NI Veristand engine RT to LabVIEW RT 2012 2011

  Hi all

  Since I'm pretty new to this Board, excuse me I'm double questions...

  I work with:

  System RT: PXI-8135

  Software:

  LabVIEW 2012

  NEITHER Veristand 2011 SP1

  NEITHER Teststand 2012

  I am currently trying to get my simulation Veristand work correctly. So this means I have to install NOR Veristand Engine to RT target using MAX.

  I heard the message (see attachment) when installing.

  Question:

  Is it possible to install NI Veristand engine 2011 my RT controller that has motor in time real Labview 2012 without downgrading my 2012 LabVIEW for 2011?

  Any help would be appreciated...

  Thank you

  Rajamodol

  Hi Rajamodol,

  the following document describes the compatibility of facilities of LabVIEW VeriStand:

  http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

  VeriStand 2011 SP1 requires a LabVIEW 2011 or 2011 SP1 installation.

  Best regards

  Peter

• HP workstation xw6200 model number: DU937AV - a Front Panel USB HUB added

  Good afternoon

   

  I'm back with a double question this time.
  

   

  (a) my XW6200 in its current configuration offers only two frontal USB 2 ports, the other 6 being located on the rear panel. Would it not possible to add a front panel USB Hub?
  

   

  (b) what about 3 USB ports? What do you think about adding to my machine?
  

   

  Thank you very much for your help.
  

   

  All the best,
  

   

  Boyar
  

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]

  Hello again from Boyar.

  I think that what you are looking for is on page 166 of & Service Guide the technical reference computer.  Here is a direct link.

  I would like to know if that's what you're looking for.

• Xperia Z5: camera problem

  I bought Xperia Z5 double question face photos n not at all certain that they news r coming scramble the both sides of the screen in the center of the screen, don't look clear with no details...
  Can someone help if Miss me some thing or number with camera?

  Did you take the film on the back of the phone?
  That's how the photos look if it is still on.

• 0xc000007b error code when you open Windows Help and Support

  I am running Windows 7 Home on a HP G71-449WM laptop .

  It is a double question I guess.  I was troubleshooting my web cam doesn't work does not and was directed to reinstall a mediasmart missing file to test because I couldn't locate.  Tried this and it would not install.  Downloaded fine, but would not install properly.

  He suggested then I go to Windows Help and Support, and when I try to run I get the same code, there was an error and the program does not load error 0x000007b code.

  How to fix this?   I'm pretty comfortable with troubleshooting on mine, but I can't even solve the problems now.

  Any suggestions would be greatly appreciated.

  You can also try the system restore to go back until you have downloaded this file.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  http://www.Google.com.au/search?q=0xc000007b&hl=en&TBO=1&RLS=com.Microsoft:-to the: IE-address & output = search & to source = lnt & to TBS = qdr:y & to her = X & ei = g7ruTPryPJevcLK0lbIK & to ved = 0CAsQpwU

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Where install any software have you tried right clicking on the shortcut to the program, or the .exe or Setup.exe and choose the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  See if there are clues in these for your webcam problem.  Is it still listed in Device Manager?

  http://www.google.com.au/search?hl=en&TBO=1&RLS=com.Microsoft%3Aen-au%3AIE-Address&tbs=qdr%3Ay&q=HP+%2b%22webcam+Problem%22&btnG=Search&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  If you have two different problems, then divide them into two positions may be a better way to go unless you think they are related problems.

• Performance 2015.4 for the InDesign update problem

  I hope this isn't a double question. I did a search on the forum and nothing has developed about the overall performance.

  I get very slow performance with InDesign 2015.4 after update from last night. When I scroll through a message at the bottom next to the preflight check, a catalog file "No error" shows "Reading [Image name]" is constantly and every time I go to another page. This happens when the GPU is enabled and disabled. And for some reason, my drop shadow details are far away. I will turn off and reapply the shadow and it looks fine until I go to another page and come back to the page with shadows and incorrectly, they reappear once again.

  I'm on an end of 2015 iMac, retina 5K

  Processor: 3.2 GHz Intel Core i5

  Memory: 8 GB 1867 MHz DDR3

  Graphics card: AMD Radeon R9 M380 2048 MB

  OS X El Capitan

  "Reading [Image name]."

  

  Shadow of a problem

  

  The Performance parameter of default display in ID CC 2015.4 was changed to high quality (previously it was typical by default). This setting causes the images to be displayed to their full fidelity and that's what happens when you see the 'Image of reading' at the bottom of the document window. For images in your document, it happens the first time you open a document and you go to a page containing images. Later browsing the same page (s), this does not happen because images are cached and are quickly made to high quality.

  The coordinates of the drop shadow should not change because of this setting, so cannot say why what is happening. I would like to take a look. I sent you a DM.

  Thank you

  Ravi Kiran

  Adobe InDesign team

• I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is

  Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!

  [Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]

  The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service

  Concerning

  Stéphane