Live a routing Record

Similar Questions

• Windows 7: games online lag & defective live tv unstable/record live tv playback (due to changes in priorities/Planner win7?)

  Since installing Windows 7 ultimate, I have 2 problems (compared to XP or even Vista):

  (1) online gaming is lag; the other players seem to move like ghosts, somehow jerky and jerky, but my ping is completely normal (low) and fps are good, too.

  (2) direct TV experience is worse now:
  When I watch a dvb - t transmission and switch to another app that I have at the same time (like total Commander, instant messaging, Notepad, etc.) I hear audio clicks and get video abandonment. The same is true when I'm not watching a transmission, but when I save it. The recordings are defective (video and audio dropouts).

  However, existing good records can be read without any problem, even when you switch like crazy between all sorts of substantive programmes and lots of tabs in my web browser. With these good records I get no problem whatsoever (for example: files in windows XP). It is only when I try to record something in Windows 7 that I get these questions.

  I have used many different programs (from dvbviewer for progdvb for dvb dream to Windows Media Center). The problem is always the same.

  This did not happen in XP, however.
  Under XP, I can switch to background programs and switch between tabs in the opera 100 without being any 'clicks' or the number of drop-outs in audio/video on live television.

  The same is true for Vista, although it is slightly worse than with XP.

  In Windows 7, interactive use of programs seems to have a strong (and negative) impact on live TV.

  My system (not aware at all, but otherwise very good work, in XP, Vista, Windows 7 and Linux):

  -Sempron 2600
  -1 GB OF RAM
  -Geforce 3 TI 200:
  I know: not supported by Windows 7, BUT:
  -J' also have an ATI HD4650 here, which IS supported by Windows 7
  and who doesn't IS NOT IMPROVE anything!

  Since my Windows 7 installation is quite recent and not yet activated, I did not install a lot, especially any antivirus that could (maybe) deteriorate the performance of the system.

  Apart from live tv playback/record and games Windows 7 IS (!) quickly on my old system.

  In addition, take into account that the games I'm talking about are OLD, so my geforce3ti200 is quite enough for such an old game, like quake2 or quake1. - And as I said, I also have a HD4650 well supported by the ITA which does NOT improve lag problems in games!

  I tried to disable nagle algorithm (as suggested somewhere), I played with registry settings like 'systemresponsiveness '; I also disabled the multimedia class Scheduler - all these things you will find in these many threads any lag in windows 7!

  Does not really - or only partially:
  Deactivation of the multimedia class scheduler service help (a little) but at the price of having audio problems:
  When switching between the different programs of the audio player (e.g. windows media player or vlc) has now audio dropouts that wouldn't happen when the multimedia class Scheduler service is running.

  Therefore, this solution is not ideal.

  Since I also tried to use wifi instead of ethernet, external sound usb instead of edge, different servers etc, and since there is that interference between the task of switching and stability of live tv, I come to this conclusion:

  This must be a timer problem. Something in the Task Scheduler in windows 7 and/or priority system was changed, when comparing it to XP or Vista.

  I see that there are more settings in the registry, as in:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile\Tasks\Audio]

  Where it looks like:

  'Planning category '=' Medium '.
  "SFIO"="Normal priority".
  "Background only"="True".
  'Priority' = dword:00000006
  "Rate of clock" = dword:00002710
  'GPU priority' = dword:00000008
  "Affinity" = DWORD: 00000000

  So I'm expecting setting could something in a different way here (?) have a significant impact...

  Last question:
  Considering the number of threads (when searching via google) all delays in windows 7 games, is Microsoft aware of this problem - and Microsoft offer a fix, a hotfix or another type of solution?

  Thank you, egman

  Check by

  Clean boot

  and update of installed drivers

• Windows Media Center - No Audio on Live TV or recorded TV

  I have days searched through various forums and tried all suggested and no still no resolution.

  I have no sound when using TV or TV recorded in Windows Media Center in Vista Home Premium.  I checked all volume mixers, nothing is cut.  I reinstalled WinTV drivers and the latest audio drivers for my laptop.  Another post suggested to install a codec package, but the link provided is for Windows XP.  I searched a lot of Vista with no result.

  All other programs work perfectly.  It's very annoying.  Someone at - it suggestions?

  Hi Parvati,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  This can happen if the speaker settings are not configured correctly

  1. go in sounds in the control panel.

  2. click on speakers and select the Advanced tab.

  3. configure the settings of speakers correctly by turning off the computer take exclusive control of this device 'allow' in speaker properties

  To work around this problem and restore audio, follow these steps:

  1. press the Play button on the Windows Media Center remote control or on the multimedia keyboard.

  2. use the mouse to click on the Play button at the bottom of the video screen.

  3. press the Pause button and press the Play button on the Windows Media Center remote control or on the multimedia keyboard.

  4 resize the Windows Media Center window from mode full-screen mode to windowed mode or windowed mode full screen.

  When you use Media Center to watch live TV on a Windows Vista-based computer, you can't always hear the sound

  http://support.Microsoft.com/kb/929515

  When you use Windows Media Center to play live TV or a DVD on a Windows Vista-based computer, you do not hear sound after you wake the computer from sleep mode

  http://support.Microsoft.com/kb/942364

  Let us know how it works.

  Kind regards
  Support of yama - Microsoft.

  Visit our Forum of Microsoft answers Feedback and let us know what you think.

• Building a dynamic array or the live 3D route

  I am trying to build a dynamic graphic 3D system with information flowing through a serial port. For example, to draw something like a topographical map living with live GPS coordinates and elevation digital. The longitude and latitude are the graph XY and elevation will be Z. currently, settings have been isolated in 3 distinct values of DBL. They are then indexed in 3 different and introduced tables in a 3D VI field. I put the process while a while loop is encompassing the process of isolation and a tunnel of automatic indexation to the exit from the while loop. The problem with this configuration is that the indexed table is only sent at the end of the while loop, so end the process, preventing a direct path data. Is there anyway I can get around that?

  Thank you!

  Use a shift register to store the data and update all data (using the table of construction) to the INSIDE of the loop. (Note: not the table grow without limits since it will eventually kill performance).

  I did something very similar to show air speed vectors in space 3.

  Ben

• Windows 7 Media Center Live TV and recorded TV no sound.

  After the upgrade from Vista to Windows 7 and get all the drivers updated, Windows 7 Media Center has no sound for TV or recorded TV, but sound works for all other programs, including just play music in media center.  Reading DVD and Bluray will similarly play with surround sound with HP DVD BD play, then it is certainly not an audio card/driver problem.  Any help would be greatly appreciated!

  An additional note: If you look at mixing devices, remember that you have multimedia running. If you do not, it may appear not as part of mixer. When I got a pronlem with no sound in WMC, but WMP worked (as well as my other apps), it turns out be the problem, but you would only see it when WMC is running.

  Thanks, my TV sound is is arrested without reason, but everything except the sound effects in media center worked. turned out that some how the mixer was gone the media center to 0 and left it like that.

  music media player plays even when he is selected in media center is not affected

• Windows Live Family Safety record what happens when a person goes incognito mode?

  It used to, but now it says "Inprivate Browsing: blocked" on my screen settings. I want to leave my teens some level of trust and intimacy, but still have a rough idea of what is going on on things should start to do not correspond to the.

  Thank you.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can use Parental controls to determine which specific programs, your child can use. For example, if you use a program to keep track of your finances, you can prevent your child to open and view your financial information.

  For more information, please refer to the tips in the article below and check.

  Set up Parental controls

  Prevent children from using specific programs

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows Live Mail - How can I move old files to the newly created folders mail?

  How can I move old files to the newly created folders mail?

  original title: windows live mail/vista/records
  1. Simple click on the header of a message to select it.
  2. CTRL + F3 will highlight all.
  3. Right-click on highlighted messages and drag them to the new folder.
  4. Release the mouse button and select copy here.
  5. If the move is successful, delete the original folder if you wish.

• Change '\\ROUTER' "UNC-name" in Windows 7?

  A question about Windows 7 Networking: -.

  Namely, my 'Network' W7 folder correctly lists the different places on my local network - my various computernames, printernames etc., and my router (Belkin) so that those who are connected and who himself has a "port" USB versatile controlled I guess by SAMBA software built into the router.

  However, I noticed that regardless of 'make' from the router I use seems to have allocated which seems to be the name of vanilla by default ROUTER, which means that storage such as USB flashdrives attached to my Belkin "versatile USB port" (to create a simple NAS for example) have assigned a UNC name from \\ROUTER - for example \\ROUTER\mystick\myfolderthereon\myMSWordtherein.doc .

  So far so good, normal and everything works perfectly. However... I would change the first part of the UNC so that rather than starting... ROUTER , it starts with something of my own choice for example just a plain R as in \\R\mystick\myfolderthereon\myMSWordtherein.doc .

  Have searched high and low in the help files, etc online for where lives this ROUTER channel and whether or not he peut be changed - R or something - but so far without success, so thought I would try here.

  Thank you.

  It cracks to myself!

  OK so as above, I've found I can't change my router's internal devicename ' \\ROUTER ' cos, as above, Belkin do not seem to provide an interface 'official' of my Play N600 to allow me to do.

  But Microsoft - via its Windows\System32\drivers\etc\hosts file - done well want to provide me with an interface to create an alias for an ip address.

  So, as the basis of my router address is by default 192.168.2.1 (Yes,), I simply added the following line at the end of the text in my existing "hosts" file:-

  192.168.2.1 R

  and 'bingo' now I can just use my desired UNC \\R\mystick\myfolderthereon\myMSWordtherein.doc etc etc for the folders and files of addresses on a Memory Stick into the USB port on my router.

  Anyone else want to try this fudge "that works", please note: it would be necessary to change the Windows\System32\drivers\etc\hosts on all Windows machine on its local network in which we want to use such an "alias" of course; No matter if one is inconsistent, either, but if you're like me you you prefer no doubt to be consistent!

  [To clarify: you can use 192.168.2.1 R on one machine but on another:-]

  192.168.2.1 Rtr

  and then use UNC appropriate from \\Rtr or \\RTR (etc etc) on a machine that , although I don't really see the point!

  Me, I use plain 'R' in the future! ]

  Hooray!

• Blue screen event (without real blue screen) and 3 simultaneous Live kernel event

  I am running Windows 7 Professional Service Pack 1 with Internet Explorer 10, with all current updates.

  Today, I searched through the observer of events under Windows Logs/Applications and has seen several entries to Windows Error Reporting. I noticed that a blue screen event was registered today, although I had not seen any real screen blue, or had no gel or any difficulty whatsoever. A minidump was created. At the exact time that the blue screen was recorded, three core events Live were also recorded and creates three .dmp files.

  I thought it was unusual because it is not the first time that this has happened. I had six blue screens in six months, without actually seeing a blue screen or the system freeze or lock up on me.

  Is it Blue Screen/Live kernel events indicative of an imminent failure? It is a desktop Dell OptiPlex 390 computer, purchased in January of 2012.

  Thanks for any idea, you may be able to provide.

  DK

  Thanks this works.  There are two problems that both resolved easily.  Kaspersky first and second CHDRT32.sys High Definition Audio Driver Conexant Systems function related

  I remove Kaspersky and using MSE instead and update the driver Conexant for the most recent driver available, even if it is the same date that drivers become corrupt

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

• Live TV buffering in Media Player completing SSDS?

  Hi all:

  I have a HTPC with a SiliconDust HDHomeRun DOUBLE 2 - Tuner ATSC DLNA/UPnP Compatible Streaming Media Player, HDHR4-2.  It is a network tuner that can stream live tv over the network on multiple computers.  It is supposed to work with Windows Media Center, set up a dual tuner or Window Media Player via DLNA playback.  I also have a simple Hauppauge tuner installed in my HTPC and it is more sensitive (a stronger signal) so I save most while using them in Windows Media Center.  I have not installed the SiliconeDust tuner in Media Center because then I can't control which tuner will record a particular program.  I would like to watch TV Live Media Player when the internal tuner Hauppauge record something else, but come to find out that the 120 GB SSD with my operating system has suddenly filled up in the 8 GB of capacity.  When I select a channel to watch in Media Player via DLNA the PC shows that it is buffering for a few minutes then the program will begin to play without any problems.   This same problem happened on the SSD in my PC NUC.  I can't find anything that could be filling two SSDS and the problem became noticeable when I started to use the DLNA for live broadcasting.

  It is possible that Windows Media Player is acting as it records the live streams and record programs somewhere where I can't say.  In both PC, I have separated HDs for recorded TV and in Media Center have selected other readers for tv registered so I don't fill the SSD.

  On the PC of NUC, I already had to re - install Windows 7 O.S. because the 240 GB SSD was filled within 10 GB of capacity, in a few weeks after starting to watch shows via DLNA Media Player.   I couldn't find the TV folder saved on the C: drive to see if there are any of your recorded shows it.  I'm down to only 8 GB now left on the O.S. SSD in my HTPC and will probably have to reinstall Windows soon that too.  I do not give up watching TV with Media Player because then I wouldn't be able to record and watch tv at the same time.  My antenna signal is too weak to use a double internal tv tuner with an amplifier online.  Anyone with useful ideas?

  Hello

  The question you posted would be better suited in the TechNet forums. I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• show ip route / routing table

  Hi all

  I have a question about the output of the command "show ip route":

  C 192.168.30.0/24 is directly connected, Ethernet0

  172.16.0.0/24 is divided into subnets, subnets 1

  S 172.16.1.0 is directly connected, Ethernet0

  192.168.38.0/24 is variably divided into subnets, 2 subnets, 2 masks

  S 192.168.38.0/24 is directly connected, Ethernet0

  192.168.38.0/25 S [1/0] via 192.168.30.40

  10.0.0.0/32 is divided into subnets, subnets 1

  C 10.1.1.1 is directly connected, Loopback1

  I understand why the lines 4, 5 and 6 are present. Its cause, the 192.168.38.0 network is supposed to have a 24 mask but it is also a network with a 25 mask and so he said that this network is variably subnet.

  But why it only shows the same for lines 2 and 3? -It should not say 172.16.0.0/16 is divided into subnets? I understand why is doesn't show "variably subnet" given that the subnet, but why not 172.16.0.0/16?

  And the same for the last two lines. Why not 10.0.0.0/8 but 32? Even if it is a loopback interface always the 10.0.0.0 network is supposed to have an 8 mask by nature.

  And maybe this is a stupid question but a static router always has a metric of 0? I think Yes, because they do not have to compete with other roads, right?

  I mean a static route will always all right in the table routing and the metric is actually just for reasons of comparison within a routing protocol to see what is the best route that should be proposed to be written to the routing table.

  I also tried to put static routes permanently in the with the "standing" order routing table, but always when I detach the corresponding interface cable routes get kicked of the RT. Y at - it a tip or something I should be aware of?

  Thanks for any help!

  I'll take the easiest part of the first question. One of the fundamental principles of the IOS is that it will put routes in the routing table is the corresponding interface is in a high State. And IOS will withdraw a route in the routing table are the corresponding interface is in the low state. So, when you log out of the interface, then the road using this interface is removed.

  The most complex part of the issue is the appearance of the measures with static routes. My explanation here would start from the point that the reason that we use measures so that we can compare the routes recorded in a Protocol and determine whether one is better than the other. This has meaning for the RIP, it is logical for OSPF, and it makes sense for EIGRP. But it makes no sense for static routes. To try to make it a little more clear: If the RIP or OSPF or EIGRP to discover a route to a subnet that goes through FastEther0/0 and also learn a route to that subnet that goes via FastEther0/1 and then we compare the roads and if you have a more attractive metric, is the one who gets put in the routing table. But with static routes if there is a static route to a subnet that requires a static route for this subnet that goes via FastEther0/1 FastEther0/0 and also, so there is no comparison and both routes are placed in the routing table. Since we do not comparisons with static routes, so there is no concept of metrics associated with the static route and IOS puts a default value in the field of a static route metric.

  HTH

  Rick

• Dbx file large will not import into Microsoft Live Mail

  I'm migration of Outlook Express to Microsoft Live Mail - all records were imported fine except the file sent.  It's a large dbx file with 5 k + messages.  Only the oldest 1600 will import.  How to import in its entirety?  I really need the latest messages, not messages in 2008 as well.  Help!

  The file is probably corrupted and it may not even have the messages inside.  If you have OE still works, and then try to save again and trying to import from this backup.  Otherwise, if the file contains messages, then DBXpress ( www.oehelp.com/DBXpress/ ) can extract them as individual eml files.  But if the messages are not in the file longer, then nothing can.   DBXpress disc function extract could be used to such cases on the XP practice to try to recover what was lost, if the folder on this drive does not have messages any longer.

  Steve

• How to record TV with Media Center (Windows 7) to a network drive?

  Well, you would think that the new MediaCenter Windows 7 would live up to the recording of your TV for a network/player sharing. Nevermind, it seems that it is just not possible.

  I have a windows 2008 R2 server and a Windows 7 machine with a TV card. Since my server has 2 TB of storage, it would be nice to save directly to a network drive. (I rode like Z :).

  I tried the following:

  1. By selecting Media Center itself: does not. Is not available.
  2. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording to RecordPath Z:\TV. Does not.
  3. Editing the registry: set RecordPath to \\server\TV. Does not.
  4. Create a symbolic link (mklink \D) of Z:\TV and \\server\TV with parameter in the registry under RecordPath.

  I am currently out of options. I could of course install Windows7 on my server, but I have no license for this, and my windows 2008 r2 is free from dreamspark.

  So: How is the world possible to make this work? And why not just MediaCenter detects my network sharing?

  Record on the network is not supported.  The smallest hiccup of network could cause problems with registration, or even TV live as the recording buffer would be located at the remote location.

  One thing you can do is to use Windows Home Server Power Pack 3 and its function of archive TV which you can configure to automatically move all your records or only those you want.

• Satellite T130-11U - webcam showing an image rather than broadcast

  Hello

  Just got this new laptop Satellite T130-11U, and I can't use webcam.
  I tried to set up with the sidebar of toshiba and also with live messenger or Skype with no result.
  The webcam is always a picture of a beautiful coast with a laguna of broadcasting.

  This is quite annoying, I don't know where ths picture is checked out, and if I use Skype, live messenger or record videos with the sidebar of toshiba utility, I always get the same result.

  Thanks for your help

  Hello

  That s really strange and I've never heard t such a question. Since I have my laptop the webcam still works correctly.

  Anyway, in your case I would try reinstalling the webcam on the Toshiba site drive:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before installing the latest version I recommend to first remove the old. ;)

• Pavilion Media Center Microsoft Media Center m8100n-problem

  Whenever I open the media center, doesn't matter if it's for watching live TV or recorded, I get 2 following messages:

  INVALID APPLICATION

  Cannot start SymAddIn

  (Click on OK at the bottom box)

  and

  PROGRAM NOT RESPONDING

  The SymAddIn has stopped responding and you will be returned to Windows Media Center

  (Click on OK at the bottom box)

  Usually, I click the OK box on these two messages and it does not seem to bother watching anything.  There are problems, however, with poor quality recording.  Someone can tell me what this program that is not responding is supposed to do and how to do the error messages disappear.  That this has something to do with the poor recording quality?

  Who did it;  Problem solved!  Thank you, c0rnel.