Re: Driver problem Blutooth on 64-bit Windows 8

Similar Questions

• Driver problems Ethernet in Boot Camp Windows 7 64 bit VM

  I can't get a good connection in my new 64-bit Windows 7 Boot Camp basic VM. I went to add this line "ethernet0.virtualDEV ="e1000"" mentioned in other threads, but he was already there. In the Windows Device Manager it highlights 'Intel (r) PRO/1000 MT Network Connection' by adding a yellow-triangle-exclamation thing. It's "State of the device" says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». All solutions?

  Fusion 3.1.1

  VM: Windows 7 64-bit with all updates to a new installation of Boot Camp system

  Host: Mac OS X 10.6.4 MacBook Pro 15 inch Unibody, 2.66 GHz Intel Core i7, 8 GB of RAM, blah, blah, blah blah

  Have you tried to uninstall/reinstall the NIC from Windows?

• Apple LaserWriter v.23 printer & driver XP work in 32-bit Windows 7?

  I can't find ' Apple LaserWriter V.23 "Windows 7 32-bit printer driver.
  Although I use this before go Notepad of Windows XP with the default printer driver.

  Can give any help, if I need this with file port printer driver in Windows 7, 32-bit?

  Also, if I have another device with driver XP (32-bit) only.
  Can we use in Windows 7 (32 bit) also? (for example. HP Scanjet 5370 c)

  Under Windows XP, the drive to "Apple LaserWriter v.23" printer is in the
  Windows printer list itself.

  Finally, I would like to know how I can use back the former driver of the printer who in
  Windows XP (with Microsoft) Please?
  (Just add the driver for XP NTprinter.INF don't seem to work in Windows 7, 32-bit)

  Thanks for all your help.

  The error is due to the fact that add a printer is not in the context of admin that will be necessary for these drivers.

  Launch Driver add rather

  printui/s/T2

  Add

  Next

  x 86
  Next

  Have Disk
  d:\i386

  Ok

  Select Apple

  Select the Apple LaserWriter v23.0

  Next

  Finishing

  Now you can add local printer using Add a network printer, since this will list the installed drivers

  printui /ip

  Select the Port

  Using a printer on the computer driver

  Next

  Work on the rest of the wizard

  Finishing

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• The Version 32 bits of PSE V14 will install and work without problems on my 64-bit Windows 7.1?

    Is it is possible to download a 32-bit version and a 64-bit version of PSE V14. Dowbload choice is offered for example on:

  https://helpx.Adobe.com/de/Photoshop-elements/KB/Photoshop-elements-downloads.html

   

  Question: If I choose to download the Version 32 bits of PSE V14, the 32-bit version of PSE V14 work smoothly on my Windows 64-bit 7.1?

   

  Explanations: I asked the above question, because I often use with PSE V10 (to restore/correction/balance the colors of the digitized versions / scanning of my old faded slides) Plugin/filter Kodak 'Digital ROC Professional V2.1.0,' which is not work in 64-Bit mode... and I'd like to continue to use this filter, Kodak/Plugin with PSE V14 once I converted my catalog V10 of PES to PES V14. Therefore, I would like to use the Plugin/filter Kodak of a Publisher version V14 PSE (on my 64-bit Windows 7.1 mode) running in 32-bit mode.

  Subsidiary question: can I also ask, if that's possible on my 7.1 Windows

  • to install
  • and use (a PSE V14 editor both instance)
    
    both 32-Bit and 64-Bit version of the V14 PES Editor (and can the 32-bit and bit Version use 64.eu event catalog)?

  Thank you very much in advance for your answer

  I think the problem is with the Setup program. I read somewhere that it automatically detects the type of OS, 32 or 64 bits and installs the corresponding version. In this case, Adobe will provide a different Installer to maintain a 32-bit version in a 64-bit system. Not very likely.

• driver problem audio 2310er HP dv3 (windows 7 32 bit)

  There is no sound after you install IDT Audio Driver, which was downloaded from the Support page of HP & drivers for my laptop and operating system, but the mute switch still works (turning red when cut and white otherwise).

  Sound works well with drivers of high-definition audio by default in windows, but in this case the 'secret' button changes color.

  PS sorry for my English =)

  Hello

  If you have used this driver on the right?

  If this is not the case, uninstall your current driver and install what I posted above.

  Reach:

  Panel-> Manager devices-> Audio, video and game controllers

  Click with the right button of your mouse on your IDT audio card it and choose Properties. Then, go to the ' Details ' tab and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  
  
  

• Scanner driver problem with - 8.1 to Windows and HP L7680 AIO

  Hey folk,

  I have a problem with my HP L7680 AIO.

  I did an upgrade to 8.1 Windows x 64

  I have install the driver real 14.8.0 version.

  The printer works but the scanner hurts.

  When I begin a scan I get an error message and the scanning process is cancelled.

  I have this error message with photoshop, HP solutions and any other scanner software.

  Printing HP and doctor Scan says I have to contact support.

  Here I am all idea?

  Either way, I disabled my Antivirus software during installation.

  Thank you very much.

  Greetings

  Markus

  Hello

  I solved the problem by myself.

  For people who have the same problems...

  It was the prevention of intrusions by more Portscanner antivirus.

  I could adopt new the situation with other systems, and this is the reason why I say that it was definitely the Portscanner.

  The fool is the AV-Suite of disabling showed no effect.

  Only after that I put the settings in the AV suite that IPS should not control the ports everthing works fine.

  Things difficult, but now it works...

  See you soon

  Markus

• The Windows 7 for P1007 driver will work on 64-bit Windows 8?

  Can use the printer driver Windows 7 for the Laserjet P1007 on a 64-bit system of Windows 8 - otherwise, when the driver of Windows 8 will be available?

  Hi CherylSan,

  I think some of my previous tests that it will work. Give it a shot and let me know what happens?

  Base driver HP LaserJet Hostbased Plug-and-Play

• Strategy with hard drive 3 TB on 64-bit Windows 7 without UEFI

  I have Windows7 64 bit running on an old motherboard which is prior to UEFI.  Now I just bought the 3 TB HD.

  I read on MBR vs. GPT and understand that I don't have an option to boot from that disk hard if I go with TPG, the lack of support of UEFI.

  I do not use this HD for the system.  However, I want to keep this as an option just in case.

  A compromise is to use Seagate DiscWizard to created "extended partition".  Simply create a virtual device drive to access the Go 700 remaining after the 2.2 to is used.  Is it possible to control the first part of size?  Say, instead of 2.2 to 1.5 to use instead?

  Someone said he overcame this limit.  http://jarrettbroder.blogspot.com/2012/07/overcoming-2TB-partition-size-limit-in.html

  Someone at - there no success?  Or any other strategy?

  Thank you

  Hi Redhonker,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Deployment, configuration and the Installation of Windows 7

• HARD DRIVE PROBLEM... FOR WINDOWS XP HOME EDITION

  I have a compaq armada m700 and I recently installed Windows Xp Home Edition, now when I turn on my computer it says 1720: SMART HARD DRIVER DETECTS IMMINENT FAILURE due to lack of ATTR. 05... IS POSSIBLE THAT I CAN CONNECT MY LAPTOP THAT HAS THE ANOTHER LAPTOP HARD DRIVE FAILURE AND UPDATE MY HARD DRIVE TO TRY TO FIX IT? UPDATE POSSIBLY WORK? OR DO I NEED A NEW HARD DRIVE?

  I have a compaq armada m700 and I recently installed Windows Xp Home Edition, now when I turn on my computer it says 1720: SMART HARD DRIVER DETECTS IMMINENT FAILURE due to lack of ATTR. 05... IS POSSIBLE THAT I CAN CONNECT MY LAPTOP THAT HAS THE ANOTHER LAPTOP HARD DRIVE FAILURE AND UPDATE MY HARD DRIVE TO TRY TO FIX IT? UPDATE POSSIBLY WORK? OR DO I NEED A NEW HARD DRIVE?

  The message you receive indicates imminent hard drive failure. There are has a few tools out there like Hard Drive re-Builder who allegedly fix otherwise unrecoverable disk sectors. However, these are not freeware, which means you would have to pay for the tool. At the time when you did that you could buy a new hard drive.

  In addition, according to my research your laptop is quite old. Pentium III is very outdated. My advice to you is to get your data on the hard disk immediately regardless of whether you intend to repair the computer laptop or not. I would use the laptop as possible to extend the period of time for you to get your data. I was then looking in a new computer.

• HDX - 18 a CTO-1200: validity sensors need driver for HDX-18 64-bit Windows 7 USB\VID_138A & PID_0001 & REV_0372

  I looked everywhere for this driver.  The validity of the sensor connection is:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=ob-65053-1

  that leads to nowhere part on this site.

  This is to set the 'unknown device', marked by W7 Device Manager.  The hardware ID is:

  REV_0372 & USB\VID_138A & PID_0001

  USB\VID_138A & PID_0001

  I don't want to pay a seller "Find-every-driver-in-the-universe" an absurd $$ for their application, when it used to be free from HP.

  Thanks to anyone who can give me a lead.  I really appreciate it!

  Joe

  (PS)  I have another "unknown device" with only the following HW ID:

  ACPI\ENE0100

  * ENE0100

  Hi, Joe:

  See if they work...

  This package contains the driver for the validity fingerprint sensor in portable models supported and operating systems.

  File name: sp45050.exe

  This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

  File name: sp45045.exe

• Problem installing HP Officejet 4500 Windows 8.1

  I recently reinstalled my dad's computer. Earlier there was Windows 7, now it has updated to 8.1. The printer and scanner function worked correctly before, but now only the printer works. It was plugged during the installation of the OS and the printer has been recognized correctly, but when I tried to install the driver freshly downloaded from the HP support page, it stopped at one point and asked me to connect the unit via USB. It has been correctly connected, I was able to print, but the installer never been there. In the Windows Device Manager I can see it with a yellow exclamation point, I also tried to ask Windows to search for a driver, but he did not. Then I tried with deleting or disabling the device, the device and restart Manager process 'Add features', but it also did not help. I also tried the full and only download driver. I use 64 bit Windows 8.1, with the Hungarian language settings

  Hello

  Please take a look at the Device Manager and the HP Installer, what specific model you see in the Device Manager while plugging the USB? (HP Officejet 4500a - f / HP Officejet 4500g - m / HP Officejet 4500n-z)?

  at the top of the HP install window you will find the same exact model (including the second characthers), or there might be a difference that indicate use of the wrong driver?

  Please let me know the results if there is a difference please let me know the exact model as shown in Device Manager, so I can point you to more the correct driver.

  Shlomi

• No sound from computer troubleshooting returns the message: "device driver IDT high definition audio CODEC driver problem.

  I can't get any sound from the computer.  Worked, but quit when I tried to watch a UTube video several hours
  After leaving the computer.  While troubleshooting, AutoCorrect could not solve the problem of the message
  has received "device driver IDT high definition audio CODEC driver problem.   I have the Windows 7 operating system.

  Hello Sharon,

  When you say "AutoCorrect" do you mean this:

  http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 ?

  If not, or you are looking for a driver try, here's one from Sony. Note that you may need to run in compatibility mode (with the right button on the file (or its icon on the desktop), select Properties, select the compatibility of the top row): http://download.cnet.com/AR5-Drivers-zip/3000-2108_4-180025.html .

  Let me know if one of them fixes the problem for you.

  Kind regards

  BearPup

• DRIVER PROBLEM WITH CANON SMARTBASE PC1210D when INSTALLING ON WINDOWS 7 RC 64 - bit EDITION

  I RECENTLY INSTALLED WINDOWS 7 RC 64 bit EDITION, WORKS FINE BUT IT WONT LET ME INSTALL MY CANON PRINTER DRIVER SMARTBASE PC1210D I HAVE TRIED to INSTALL all THE DRIVER FROM THE CANON SITE, ALSO WINDOWS UPDATE cannot FIND ANY DRIVER.
  I ALSO INSTALLED THIS PRINTER ON ANOTHER PC WITH WINDOWS XP (IN NETWORK) IT WORKS FINE ON WINDOWS XP, IT SAME USED LET ME INSTALL AS A NETWORK PRINTER SHARE.
  ANY HELP WOULD BE APPERICATED
  Thank you

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is for Windows 7 Forums.

  This is the place to ask your questions Windows 7 partners.

  The driver problem is not to do with Microsoft.

  CANON has written drivers for their products.

  If CANON does not write a driver for your model of printer for Windows 7, there's no.

  Try a Vista of CANON printer driver. If no available Vista printer, or it does not work, you are out of luck.

  And gently, do NOT enter capitals,

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Scanjet 5590: HP Scanjet 5590 10 64-bit Windows driver problems

  The driver for the 5590 Scanjet under 64-bit Windows 10 has caused me a lot of trouble. I installed, reinstalled and done everything I can think of to make it work. The pilot must main installation problems or it will just say that the material cannot be found. It becomes very frustrating because I had a lot of problems with the h p drivers recently. If anyone thinks they have a solution, I would be grateful for feedback. I even tried to run the software on the device when you install the "compatibility mode" to be compatible with Windows Vista. None of the steps worked. I know that the Scanjet is connected and read on my computer because when I run the software to doctor: p and do a scan test, the Scanjet responds perfectly well. It must be a problem with the driver software.

  Hello

  Thank you for using the forum.

  Have you tried the HP scanning and Capture from AiO applications away from the Windows store?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Let us know if it works.

  Thank you.

• FCA202 7 - driver problems - Windows 64-bit operating system!

  I had this FCA202 interface today and im having a LOT of trouble of implementation... I got the internet 1.3 update, but it says it's for 32-bit operating systems... and ive tried everything looks... I can't install the drivers! Help!

  Hi Mike,.

  For assistance, please provide brand and full model number.

  We need to check if your device is compatible with Windows 7.  See the Windows 7 Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=FCA202

  You can follow the steps mentioned in the link below

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please contact the manufacturer of your device for known problems.