Re-enabling the function paste

Similar Questions

• How to enable the function keys beats again after the upgrade of the OS?

  How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000

  Stealth,

  The combination of bat function keys is

  FN + b

  as stated in your Quick Start Guide

  Chapter 1, Page 2

  The Guide:

  Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
  Crystal clear sound. Beats Audio is enabled by default.
  ▲ To enable or disable the Beats Audio, press fn + b.
  Select Start > Control Panel > hardware and sound > Beats Audio

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.

  There are actually two different models in the category of 210-4000 Mini.

  Start here to the Support and drivers

  • Select the model entry that corresponds to your laptop.
  • Go to Software and Driver Downloads
  • Select your operating system (Windows 7, 32-bit), and then click "Next".
  • Scroll down
  • The Audio driver is the first category...
  • Download the package, pay attention to where it is saved.

  Given that you just upgraded (probably from Vista?), you may need to update some other software too.  Go through the different categories and see if you need / want any of the other packages.  Most of them can be added 'above' of what you already have on the system.  If you must delete something, the program will inform you when you try to install the new version.

  • If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  For Audio driver... After you update / install the driver, reboot your computer.  After that, you should have your software Beats back.  If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...

  Good luck!

  ----------------------------------------------------------------------------------------------------------

  Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• Qosmio G20 - how to enable the function keys

  Can someone tell me how to activate the function keys? I seem to be entirely invalid.
  Thank you
  Mike

  Hello

  In my opinion one of the important gift of drivers or utilities work and, therefore, you cannot use the FN keys.

  If your have installed XP on your test of the G20 to refresh the Toshiba common Modules.
  It is an essential tool that controls the FN keys.

  The common Modules can be downloaded from the page of European driver of Toshiba.

  Check it out.

• Retrieve a Document copied by right-clicking "copy" and the function paste

  I created a document three days ago. I tried to copy and paste in another empty document. I have accidentally re-copied something else and stuck the most recent copy, that was not the first document I wanted copied. * I hope this makes sense * what I thought was that Windows maintains these copy documents to the Clipboard. However, I hear that Windows Vista is not such file no longer available. Is it possible to retrieve the first copied document of, perhaps, a list of documents copied from a Clipboard? Because I copied something else before I stuck the first document... I hope that, somehow, it's logical... :) Thank you!

  You should not have a history of items on the Clipboard in Vista (even if there are 3 third party programs that can be installed to provide this functionality).  These features won't work if you have saved this document copied a file - not if you only copied the text, but it was never actually saved.  If this is the case, I'm afraid you're out of luck.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if it does not also the chances of recovery are slim, but we invite you to try other options if you wish)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help for the function "paste inside", please!

  Hello. I am an old user of Freehand drawing that needs to know how to accomplish the task of "paste inside" in Illustrator. I have a chart which I don't show that in areas where the other graph exists. I don't know how else to explain it. Help!

  Hi JBinReno,

  You can refer to a clipping mask. Say I want this image of a city to be included inside this rectangle sheared.

  

  Just select the form and image and choose object > clipping mask > make.

  

  

  To change the image inside the shape, just double-click on the graph and you can change "inside."

  What is the solution you're looking for?

  Michael

• How can access Windows Management Instrumentation Win32_Processor and Win32_OperatingSystem to re-enable the functionality of WMI and other features such as system information?

  Running Windows Home Premium SP2.

  I stumbled upon the answer to

  http://social.msdn.Microsoft.com/forums/en-us/SQLExpress/thread/b924e835-b835-4883-8323-8b3600dfb0c1/

  of greggnlisa.

  -Goto the start menu and LOCATE your command prompt (should be under the accessories section).
  -Right-click on it and select "Run as Administrator".
  -At the command prompt, type the following: net localgroup "Directors" "NT Authority\Service" / Add

  -Then press ENTER.

  -Reboot and you're done.

  I do not understand how it worked, but it took me several weeks to locate.

• G8D94PA #ACJ: is it possible to change the function of the FN keys?

  Hello

  I sometimes use windows 7 32-bit due to my software dependency. in some software I have to use fn keys (F1 to F12) frequently with the combination of other keys. It is possible to enable the functionality of the fn keys as from now on if I have to use F5, so I use FN + F5 combination. So in this software I have to use F2 to F7 & I have to press CTRL + ALT + FN + F2 to F7.

  Please share any solution...

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Function paste lost

  G5350uk desktop PC

  Windows 7 64 bit

  I lost my function paste!  I can copy but not paste (unless I'm in Word, and then I can use the Clipboard).

  Does anyone have ideas how I can get it back please?

  Your help will be appreciated.

  After trawl by othe forums like this, I came across a suggestion that, if you're using 'Advanced System Care PRO' of a company called IOBIT, then this can cause then paste the function to stop working.  I removed CSA and, of course, the function paste has been restored. -yay...!

  I wrote to Iobit to let them know about this problem then I hope they find a solution to this problem soon - or they will lose sales.

  Sorted

• After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside...

  After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside... need help pls

  PS noticed the update downloaded twice

  disregard my previous question... I found the answer: F1, F2 has been ticked on.

• My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  A repair from the Vista DVD installation.  Don't forget to have a backup/restore point just in case.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work

  How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work. I would have the size as a Properties window opens. It was about 12 tabs for different frunctions. «Please help me someone...» I would be grateful! »

  Hi Aldo,.

  What is the manufacturer, brand and model number accurate and complete from your computer?  What is the manufacturer, the brand and model of your keyboard?  We can not help you without more information on your specific computer.

  If you want to go faster, simply contact the Group technical support from the manufacturer of the computer or go to their support site and ask them or look for this issue.  If you provide us with the above information, we will go to their website and see if we can find the instructions (if we can) – and they will be able to do it faster and better than we can.  The choice is yours.

  I hope this helps.

  Good luck!

• Suggestion: It's about the COPY PASTE function. It is possible to apply multiple copy and paste feature uses publishers or any application of MS?

  Suggestion: It's about the COPY PASTE function. It is possible to apply multiple copy and paste feature uses publishers or any application of MS? For example, I need to copy the 4 lines of text and want to paste in 4 different applications. First line on the 1st application, 2' nd on the other and so on. With this I can choose 1st line and COPY 1 copy, nd line 2' COPY 2 and so on. And while pasting, I can choose the necessary text to PASTE 1,2,3 or 4.
  This feature takes really where people have to work with text editors in their daily lives and find these scenarios quite often.
  I have no idea if this feature is already encapsulated in the MS Editors, so if it's already there kindly let me know.

  Thank you.

  Kind regards
  Fahad

  Send your comments to MS and request this feature in Windows 8:

  http://mymfe.Microsoft.com/Windows 7/Feedback.aspx? formID = 195

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• The functionality Execute Disable No. run CPU is not enabled for this machine.

  Hi all!

  After my first installation of ESX 4.0.0 build 164009 on a HP Proliant BL680c G5 (2CPUs - 40 GB Mem), I get the usual screen with the HTTP host address and the stuff of Alt - F1 and Alt - F11, but at the bottom, in red, I get the following error:

  TSC: cpu0:0 1246869) Init: 461: the CPU Execute Disable/No run function is not enabled for this machine.

  I think I must change this setting somewhere in the BIOS, but I can find it. This BL was originally installed with W2k3-32-bit, which was pushed from an Altiris console. think the PSP usually "optimize" some parameters depending on the operating system must be installed.

  All ideas

  Hello

  I would also enable the Intel-VT if it is not already in your BIOS. It is always very good check that your BIOS settings are correct for ESX. HP should have a white paper or documentation with the appropriate settings.

  So far enable for Intel HP systems based on my list includes:

  Intel VT

  No execution

  If YOU select an OS type select Windows NOT Linux.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Equium A110-252: how to enable the wireless function?

  Hi, first time ive been on this forum. I recently bought the toshiba satellite (think that's the spelling) and a wireless router. now, the router works well with my other computer, is very fast, but I can't go online with the laptop. all the info I get, is that the wireless is not activated? its got beat me, so I hope someone out there can help me to solve the problem, so I can start using my laptop in the room. Thanks in advance. Susi

  Hello Susi

  The first use of WLAN switch and move it to THE post. The WLAN control light should be on. After this check in If Device Manager card is correctly registered.

  The last step is to use the FN + F8 key combination to activate and enable the wireless network adapter. When activated the WLAN connection must be configured correctly. I assume that your camera comes with WLAN client utility. If you use this utility to configure the WIFI connection, please ensure that this WLAN Windows option is disabled.

• How to enable the Java Script function in APEX 4.2.6 running on the result of an Xquery query.

  How to take a SQL query result in the source section of an APEX "agenda of the page" field and allow this request to be formatted using XML in an HTML format for a Java Script file to perform a function on the result?

  Currently I have the following text:

  To query the DB table and format the result as HTML:

  SELECT XMLELEMENT ("UL id ="ticker01"', XMLAGG (XMLFOREST (Scroll_Mess AS LI))") "item UL' OF Web_Ticker where Mess_Id < 10 order by Mess_Id;

  
  

  That displays the following:

  
  

  < UL id = "ticker01" > < LI > HELLO < /LI > < LI > HELLO < /LI > < /UL id = "ticker01" >

  I need the output of this to be visible to a JScript function that is currently called the "head of page", but there doesn't seem to be its scope? The function works correctly if there is a list in the page field items 'Text element Pre' but does not work correctly when used in conjunction with the query to generate a table form.

  If everyone is happy to help I would be grateful .

  James.

  Solved!

  In order for the request to be part of the DOM of the page of the APEX, the Java Script allows to perform its function on the result marked "HTML" to query, you must set page of the apex on which the query resides and then add the inner text of this page to a second variable for which the function of web ticker can run on as follows:

  $(function() {})

  var x = $("#P9_TICKER_DATA");

  var y = x [0] .innerText;

  x.Append (y);

  $("UL#ticker01").liScroll ();

  });

  From there, on the Java script is able to properly see the result of the query in HTML format.