Re: Failed to start General on the Satellite A300D-158

Similar Questions

• The Satellite A300D - 158 DVD player firmware downgrade

  Is it possible to recover the old firmware (1.50 worm) or newer for DVRTD08A drive?

  Unfortunately, I flashed this drive with the wrong firmware version 1.54 to DVRTD08L with label flash function. My drive does not have this feature.
  This firmware will not affect the player functionality?

  Hello!

  I don't know if the bad firmware affect the functionality of the reader, but in your case I would test it Mr. try to read different CD s/DVD s and create your own CD s/DVD s.
  Then you can see if your drive is defective or not, but I think a bad firmware will improve the functionality.

  It s doesn't know is not for me to get an older firmware. To do this, you must go to a local ASP and ask a technician for help.

  Good bye

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

  Log name: System
  Source: Service Control Manager
  Date: 17/07/2011-21:12:53
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: ivan-PC
  Description:
  The BCM42RLY service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      203523
     
     
      System
      Ivan-PC
     
   
   
      BCM42RLY
      %%d Ko
   
  original title: can someone please help...

  Hello

  1. you are using a Dell computer?
  2. What is the model number of your computer?
  3. don't you make changes to your computer before the problem?

  BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  Uninstall or reinstall a device

• The Satellite A300D-17F battery specifications need

  Care to say battery lasts 1 hour...
  What is the Satellite A300D-17F battery WHA?
  He's not 6-cell 4800 maH?

  Thanks in advance.

  Hello

  As far as I know the laptop uses battery part number 6 cells: PA3534U-1BRS or PA3534U-1BAS
  It supports 4000mAh

  See you soon

• Re: Satellite A300D-158 SATA driver

  Hello!
  I need driver SATA for Satellite A300D-158. I don't know name of chipset for this laptop. I need for Windows XP. Where I can find these drivers? Maybe someone knows the name of the chipset in these books?

  Help, please.

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131920

  Maybe it will help you.

• Satellite A300D-158: webcam screen is almost black

  Two days ago, I bought a laptop Toshiba Satellite A300D-158. It's a really cool hardware, but I have a problem with my camera.

  It seems to work, but the screen is almost black.
  I see my face (poor quality, there are a lot of noise on screen) only when I run a night Mode and 50 Hz.
  Interesting thigs, it's that when I hide the camera using my hand the camera stop and try again to black screen regardless of my settings.

  I have to click on 50 Hz to 60 Hz and 60 Hz to 50 Hz and after that I can see a view.
  I checked all the possible settings in Camera Assistant Software but it doesn't give any effect.

  Pls help me ;/

  PS: Is it possible that the hotel is broken?

  Try to update the Chicony Webcam driver to the latest version. The pilot is on the site Web of Toshiba in the drivers section.

  I had a quick glance at the page drivers, there is no camera A300D driver. Try the Satellite L300D webcam driver v1.7.193.0508L

• The first Installation fails after first Boot of the Satellite L750

  Hello.

  I turned on my brand-new Satellite L750 - 04K 010 for the first time tonight (bought new) and start going through the initial setup process for Windows 7 Home Premium. The installation must "Installing devices" and then hung up without activity for about 2 hours, how I decided to restart.

  Then I kept getting the error windows installation has failed and would then need to restart the installation process. The computer will restart but kept coming up with the same error and the loop would continue even once.

  I have not received the installation discs.

  I tried to press F8 to see if the computer repair would work but only gave options to repair the system to a previous state. No Toshiba option was available.

  Help!

  Thanking you in advance,

  Greg

  It's pretty stupid situation now.
  If there is no way to launch the installation of recovery once again I recommend your dealer and ask for help. With other words, ask for the replacement of the laptop.

  What you can also do is to contact the nearest Toshiba service provider and explain the situation. I put t know what they can do for you, but I imagine that you will get a DVD of recovery for the installation of the OS.

  Of course I n don't know what the right solution, but I don't see another option for you.

• After the installation of 6 of Lightroom, it fails to start due to the fault of libcef.dll

  Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll.  Three event log entries are created, as indicated under my signature.  Can someone help me please?

  Thank you

  Jeff

  Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c

  The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68

  Exception code: 0xc000001d

  Offset: 0x00000000020f5fa3

  ID of the process failed: 0 x 1280

  Start time of application vulnerabilities: 0x01d0cb85de3cf6e8

  The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  --------------------

  Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.

  Program: Adobe Photoshop Lightroom

  File:

  The error value is listed in the additional data section.

  User action

  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

  2. If the file is still not accessible and

  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

  4. If the problem persists, restore the file from a backup copy.

  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data

  Error value: 00000000

  Disc type: 0

  --------------

  Fault of type 166477209, bucket 20

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: lightroom.exe

  P2: 6.0.0.10

  P3: 5523190c

  P4: libcef.dll

  P5: 3.1750.1805.0

  P6: 53eb9d68

  P7: c000001d

  P8: 00000000020f5fa3

  P9:

  P10:

  Attached files:

  C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  State: 0

  Hi Jeffrey,.

  Please refer: " Lightroom 6 crashes when I try and open it."  Signing off CC does not help :-(

  I hope this helps.

  Concerning

  Megha Rawat

• Windows fails to start due to the registry error

  Original title: this is a double whammy.

  My windows XP crashed he keeps coming with the registry cannot load the hive (file0\systemroot\system32\config\software. I know there is a way to solve this problem through the reg change but do not know how. Also, I thought I could get around this by installing windows xp home edition on a different partition. the problem is that I forgot to put it as a dual boot. Now I have the same windows xp on a partition. Fortunately, we're on the C:\ drive and the other on the D:\drive. Help, please. Thank you

  What does 'crashed' mean to you?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  You will see messages like this if the file system is corrupt and XP just cannot play or read the file, then XP stops loading and complains.

  Rarely, it means that the file is really corrupted or missing (unless it happened by human hands).

  Run chkdsk /r from the Recovery Console XP will straighten the file system if nothing else is wrong and that I would always start by chkdsk/r when these types of messages are encountered.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk /r on your hard drives may solve your problem completely.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Volume of the Satellite A300D going low-high-low-high

  Hello

  I have a Toshiba Satellite A300D and I was listening to music through the built-in speakers and the volume seemed to go low-high-low-high (as a pulse)

  It is not that noticeable, but now I know about it.
  I'm quite get irritated with it. (I'm playing music via iTunes)

  In addition, this also happens when I use headphones, and when I play through external speakers.

  Anyone have any ideas on how to solve this problem?

  In addition,

  The button of the Player multimedia music button on the laptop itself opens Windows Media Player.

  Does anyone know how to change it to iTunes?

  Thank you!

  > I get quite irritated with it. (I'm playing music via iTunes)

  Have you noticed what playing music with MS Media Player, Win Amp or other applications?
  Do you have this notice without installation of software 3rd party such as iTunes for example?

  To be honest I have never heard of this issue, and I think that this could be linked to the gift of pre-installed software 3rd party laptop.

  > The button of the Player multimedia music button on the laptop itself opens Windows Media Player.
  > Is anyone knows how to change it to iTunes?

  As far as I know that's not possible. I use my mind Winamp buttons because I could activate this software WinAmp but it s doesn't know only not for me, it would be iTunes software supports the extension of the networks too.

• Satellite A300D-158 (AMD ZM-80) - internal temperature of 70 - 80 c

  The NB was bought a few months ago, and these days begin to stop from time to time. Not to sleep or cut the words but just nearby. Whenever he is in a State of rest. I suggested what I due to overheating. First I remove dust from the processor fan grig. Then I begin to observe that enough space will belong and near CPU cooling unit.
  Cases outside parties. But in comparison with my second NB which is a non-Toshiba machine with Intel Centrino 2 2.4 GHz, the Satellite is much warmer.

  I installed all new drivers, including the BIOS.

  I installed CoreTemp utility that shows 60-70 ° C temperature of charge now to 25-35% CPU and up to 80 ° c at 50% load. And even rarely 87 C.

  The running application is Photoshop and in parallel a film in the Mozilla Firefox browser... A few months ago, I made a DVD on this NB within two hours without any overheat shutdown. But no charge is miserable.

  That is what it is? I'm starting to regret, I chose Toshiba and at least AMD CPUS.

  Hello

  I use Satellite P200D AMD CPU and also an A300 but with Intel Core 2 T8100 processor. I just positive experience with AMD on Satellite P200 processor.

  Your laptop is placed correctly on the desktop?
  The temperature in my opinion is not critical but shut offs are really bad sign.
  Can you please try to follow: square back of your laptop on CD two boxes to make a slightly higher rear? I hope that the laptop will be able to take a breath. Please post the results.
  These two applications running should not be a problem for this model of laptop.

  If you really think that this question may be critical for your laptop computer, contact the nearest service provider and ask for advice. The laptop has guaranteed valid and if something is not there, they will halp you.

• Satellite A300D-158 - no sound on external speakers

  Hello

  I use A300D-158 with Vista 32 x internal speakers work ok but when I switch to external nothing changes (I can hear sound from speakers for laptop, but nothing about external speakers - as if I didn't all go). How can I handle this?
  Thanks in advance for the help.

  Hello

  Check please follows thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=177375& and read the last post here.
  This can help you?

• Starting problems on the Satellite Pro 4270

  I have just received a satellite pro 4270 and told me it worked but when I turn it on all I get is a moon a cargo box that is not loading and a Sun I can here sounds of indoor work.

  Hello

  You also received the Toshiba Recovery CD?
  If Yes, try to start from the CD and try to refresh the operating system.

  You can also check if something appears on the external display.
  Try to connect the laptop to the second monitor.

  But generally, it sounds like a hardware problem it is a second hand unit, but I'm afraid the guy who sold you a defective phone: (m