Starting problems on the Satellite Pro 4270

Similar Questions

• Malfunction of the power on the Satellite Pro 4270

  I have a problem with my AC adapter (model PA3049U-1ACA): my 4270 Pro Satellite ceased to get power and it worked only with the battery. I have this problem only twice in the last 6 months, but the other times, the problem has been resolved just remove and reinsert the plug in the notebook. Instead this time it does not work.
  How will I know if the problem is due to a broken adapter or a faulty connector "DC in"?
  I searched online for a new AC adapter but I found only "compatible" adapters: they are good or if I should get an original?

  There is another problem: yesterday the internal modem no longer works: would it be a consequence of a failure of the power started yesterday?

  [Edited by: admin on 12 February 06 17:24]

  Hello

  Original AC adapter has this part PA2450U number. If the compatible one has the same characteristics and the same connector, there should not be any problem, but I personally prefer original parts. After you have connected the original adapter, you will be able to check whether the slot is maybe defective.

  As far as I know the modem functionality depends on many things (configuration, hardware malfunction) and control first entry in Device Manager. Please report the status of the modem in Device Manager.

  Good bye

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• Satellite Pro 4270 and network problems

  I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

  But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

  In the next devices, win98 reports error handler:
  The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

  The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

  In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

  Hello

  I guess it is Win 98 Second Edition You are using on the 4270.
  Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

  While you are at it download the other drivers you need more.

  BR

  Tom

• Need advice on the installation of WinXP/2000 on Satellite Pro 4270

  Hello!

  (Sorry for the redundancy of this topic on this forum, too.)

  Please, any suspicion on this strange problem will be appreciated.

  I bought a used Satellite Pro 4270, with totally empty 6 GB drive, a pretty neat and apparently well kept machine...

  But, trying to make a new clean Win2000Pro installed on it, as previously successfully dozens of times on other PC machines, installation will be ending in a minute after that is to start with the 4 on setupdd.sys error!

  On WinXPPro new clean install, that the procedure will be stuck in less than 10 seconds, without any error at all...

  So, it might be the reason the cause?

  I tried several different corrective actions on this machine and guess several reasons, the cause, for example

  -the hard drive works fine on other machines and has also been fully verified and updated in shape at low altitude
  -copies of CD installation I tried several all work fine on other machines
  -the BIOS has been upgrade v2.70 just some time ago
  -the CMOS was turned off, i.e. in default some time ago
  -the machine was torn off at the minumum on audio memory, PCI, USB, etc.
  -the machine must be somehow strangely, which on the BIOS or HDD?
  -are there some 'weird' IDE or other driver disappeared on this case?
  -tests with installing Win98SE and FAT32 will not lead to a better result, just somehow different...

  Best regards

  Pete v.

  Hello Pete

  It's a really bad situation. If you do clean install of the OS you na? t need any special drivers. Everything must be preinstalled when installing the OS is completed successfully.

  If you have a few HARD drive replacement, you should try to use it and see if the HARD drive is certainly not responsible for this. The fact is that W2000 and WXP can be installed successfully on many other old models of laptops and because of that I can't imagine that it is not possible to do the same on your device.

  Is it always that W2000 is supported for this device and you can find that page to download all the drivers of W2000 on Toshiba.

• Satellite Pro 4270 update Win ME, Win XP

  Dear all,

  I want to update my laptop Satellite Pro 4270 of Win ME to XP. If I start the XP, program update
  starts but a message appears: "component a Toshiba Satellite Pro 4200 unit... GSXS system." If you go forward with the
  Update, it is possible that one or more devices / components system are´nt works more.., please update
  the system... »

  What can I do to make the update correctly, that is to say that the components of the system work with new XP system?

  Are there updates regarding this problem?

  Thanks for your help.

  Mr. kohl
  Germany

  Hello

  Also, I wasn't able to find the drivers for Win XP for this device.
  However, if you want to install Windows XP you can do, but as said above some functions may not work.

  The last possibility is to check the other laptop computer series and try to install drivers other laptops that support the same features.
  Maybe you about success.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Are the keyboards of the Satellite Pro A300 and A300 Satellite the same?

  Hello

  For the moment, I am here in France, and I plan to buy a Satellite Pro A300 with a QWERTY keyboard (which is not exactly a problem for me at the moment). The problem starts when I return to my country where the layout of the keyboard is QWERTY. I intend to sell the laptop when I return (I love not hooked to a laptop computer for a very long time). The thing is that the Satellite A300 is officially sold in my country, but not the Satellite Pro A300. I wonder now if the keyboard for the A300 is compatible with the Pro A300 (looking at the discussions of the forum for older models suggest they are compatible, but I'm not completely sure).

  Can someone provide a definitive answer to this question of compatibility?

  Thank you!

  The button of keyboard layout doesn't depends on Satellite Pro or series of satellites, but of the country where the phone was purchased.

  Different countries need different keyboards button and that's why the buttons are assigned to different positions on the keyboard.

  But the keyboard itself could be used in Sat Pro or Satellite phone too.

• Satellite Pro 4270 LCD is slow.

  I Satellite Pro 4280 14 "and have no problem. I bought a second hand Satellite Pro 4270 13 "but the graphics on the screen appear to be slow. Tests using Direct X cube rotation is unclear. I've set up two screens mod with a CRT 17 '' monitor and two screens side by side, the CRT is icon perfect, but the 13 "laptop screen is too blurry. So I know that there is nothing wrong with the graphics card, just the screen. Is this normal for this model? or y at - it something wrong? Parameters are defined with the latest driver S3 Savage, which has not changed anything with all of the display of "display panel 1024 x 768 laptop. Using only the mode screen 800 x 600. Clues? Thank you very much.

  Hello

  Please be shure that your 4270 13 "is a demonstration of DSTN. The sharpness of a DSTN display cannot be compared with a TFT screen, which is used in the 4280.
  The 13 "the 4270 has a internal resolution of 800 * 600 max. DSTN, 4280 with 14" TFT 1024 * 768.

  Best regards

• Lack of Win98SE PCI/Sound driver for Satellite Pro 4270

  Hello

  I have an old Satellite Pro 4270 with Win98SE license.
  I have no driver CD and only a Win98SE installation CD. So I installed Win98SE.
  From Toshiba Web site show me a lot of drivers for Win98SE which I installed.

  But I have not found a driver for the PCI card that has a yellow "?" in the Device Manager. I do not mean the PCMCIA slots.

  I installed the driver of his Yamaha DS - XG, but I can not here any sound.

  So where can I find the PCI driver and sound driver better.

  John

  Great! :)

  Thank you for your comments.

• Help identify the Satellite Pro 2100 download driver

  I have a Satellite Pro (marked below as a PS210E-00C3G-EN and a P4 2000/256/30 G, 15XT, CDW, LW). I think it's a satellite Pro 2100, whatever.

  Problem I have is that when it comes to downloading the drivers, I can't find anything approaching this model of the selection process. I've searched the forums and there's not much on this machine otherwise than in this one, so I was hoping someone could help me identify this machine especially for driver downloads... Yes, guess who has reinstalled Windows XP without checking I had all the specific stuff Toshiba tucked away first?

  For now, I have a load of things works without drivers, and it is not at all optimal...

  Thanks in advance

  J

  Toshiba European driver on this page;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

  and choose;

  The Satellite Pro Archive Satellite Pro Satellite Pro 2100 21xx archives *.

  Then you will find all drivers available for this machine Toshiba ;)

  Good bye

• Fanspeed went the Satellite Pro A200

  Hallo,

  the fan speed increases after bios update. I'm not the only one, but all others have the same problem or not? The fan runs every 30 seconds of high level, too strong. In addition, I went outside and again, the fan works every 30 seconds. SpeedFan said that two hearts are on 10 C. So why does the fan work? After checking the toshiba power management, I changed battery. But this view has not helped. The fan runs again every 30 seconds, but the fan speed does not detect a fun Temperation. The two nuclei of 30 c to surf and send. And another fact is that I want to use carrots for 2 GHz and not 800 Mhz (utility). Change cooling EIB defragmentation method and the intel utlity says 800 Mhz to 2 GHz! It seems that the method liminized toshiba carrots at 800 Mhz?

  If there is a chance to roll back the bios, please help me. Or if there is a guy from toshiba, so please tell the BIOS programmers! In addition, my olders toshibas allowes to control the speed of the fan by the bios or software (fanspeed), why does'nt the satellite pro A200? The fan is too strong tension and the offset of the Temperation is at bottom.

  Please another you experiences, even, you have no solution for the problem.

  Bye - Daniel

  (installed under Vista Ultimate system, all new packages of windows and toshiba)

  Published by: ADMIN on February 16, 2008 20:52

  In most cases the update BIOS helps ;)
  But thanks for this info!

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

  Welcome.

  I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
  Thank you

  HI Artur,

  Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

  You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

  Kind regards