Re: I am unable to install a new usb modem

Similar Questions

• Wireless connectivity after you install a new LAN modem.

  Installed new DSL modem/wireless router. Using WPA2-AES security for the wireless. All new wl in my local network components reacted very well. 2 units of wl, Sony VAIO TR3 and netbook Acer Aspire One, does not connect to the network. Both use XP svc pk 3. Pswd screen Sony allows WPA2-AES and I entered the pswd. The netbook has entry field for WPA-TKIP. I enter the password anyway. Neither connects via WIFI (both connect via ethernet very well).  Vietnamese to the new modem/router installation, both of these units connected to the local network very well. The previous security with the router was WPA-TKIP. Any ideas?

  Hello

  Different wireless routers treat differently security. Many cannot deal with double level of encryption.

  First of all the stage newspaper with a wire to the router and disable security.

  Make it work temporarily with open connection.

  Spend on wireless security, then to use the WPA - PSK or TKIP - which is in the router to two computers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error 1720 when installing software for usb modem

  Hello

  So I'm having a problem installing software called mobilink for my novatel usb wireless modem, actually it's not mine to someone else.  When installing the software directly from the usb port it will stop and say Error 1720.  He had the same problem with a modem former usb from the same manufacturer, but I managed to download the software directly from the manufacturer's website and installed without problem.  With the recent usb model, they do not offer the software online.  The Windows Installer is updated and saved, is this a problem with windows vista or any associated windows? It seems to happen during the installation of the usb modem.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/2438651/en-us

  It will be useful.

• I'm unable to install a new game. My hard drive says that there is no disc. How can I solve this problem

  I bought a new game and tried to install it but my hard drive does not recognize the drive. I had problems with other games that I had already installed as well. The driveshuts down in a few seconds. "It worked when I bought the computer but doesn ' t now.

  A moderator has moved this thread to Windows for the hardware and drivers Forum of feedback Forum.

  Hi, Fred5459,

  Follow the instructions given by Rob Brown

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/DVDCD-does-not-recognize-disk/815edc98-88ac-4985-954F-0f8c5414ac7c

• CS4 was unable to install the new Mac

  Trying to install my CS4 Design Standard on my new computer. I copied Illustrator, Photoshop, Adobe etc on an external hard drive and they downloaded on my desktop. Also downloaded Java inherited program.

  They are not open. 'Error 6'.

  I have tried different browsers and restart... no luck.

  I have yet to get the serial number asked.

  Yes, I admit it legit, have box with serial number and original discs.

  Any help?

  The programs must be installed using the installation files... transfer from one device to another will not work.  Depending on the operating system of your new machine, it is also a probability that the software is too old to work with the new system.

• HP ENVY h8-1400z: impossible to install a new copy of Windows on HP ENVY h8-1400z

  I'm unable to install a new copy of Windows 7 on a HP Envy h8-1400z. I had to replace the hard drive and there is no disk recovery performed by the owner.

  I was finally able to set the BIOS to boot from the DVD, but now I get a message that the drivers must be installed.

  What drivers might need to install a fresh copy of the operating system?

  I downloaded Windows 10 on USB. Clean installation since the media worked.

• How can I install the new updates___

  I have Vista 64-bit with Service Pack 2 is already installed, but am unable to install the new updates re: windows or office. One of the errors is '80070641'. I followed the instructions from Microsoft re: unable to install and read some of the forums found in the search engines which lead me to believe that my window Setup is corrupted or missing something. I went through this with HP as it was impossible to install updates also. I have a DVD of the operating system, but do not know how to use if appropriate. Give me options. If I need to recharge, can I just the installer? Should I save all my files first? Charleei

  Maybe this article will help you. Use the option "fix it for me":
  http://support.Microsoft.com/kb/971058

  t-4-2

• A popular problem; Failed to install the new creative tool of cloud

  Sorry to bore everyone to death with it but after manhandle my way through literally piles of bits of son, etc. off google, the end result is a lot of confusion.

  My situation: running win 7 64 bit (uptodate)

  I've been running the tools creative cloud for nearly a year, but this last development day, or maybe that's not the last, but the update in June... left me unable to install the new tool CC.

  When I run the Setup, it ends with the message, stupid and unnecessary:

  "We encountered the following problems:

  Office of creative cloud could not be installed.

  So far no tool failed to start, at least not the ones I use regularly (PS, LR, bridge, etc.)

  Then, I see some messages suggesting the "cleaner" and when I read the README with it, sounds really time consuming and a royal pain to follow the instructions... all the backup etc etc etc.

  I hope someone can put into a kind of overview of how to proceed here.  I've read a few reports of people succeed in getting after the problem... but not a discription of how they did it.

  I really don't want completely disturb my work and my time through plans heavy to see it did not work and no progress has been made.

  So if there is a set of measures to take that are likely to put an end to the success please someone have them.  I have not found a complete discription of how to proceed.

  Harry please follow the following steps to reinstall the creative cloud application.

  1. Rename the OOBE directory located in C:\Program Files (x 86) \Common Files\Adobe\OOBE to OOBE_OLD
  2. Reinstall the Application Adobe Creative https://creative.adobe.com/

• HP Deskjet 2542: Cannot print wireless Deskjet 2542 after installing the new modem/router

  We have recently installed a new Netgear modem/router and have not been able to print wireless since installation. I tried everything I could find on the forum and still no luck. Any help will be appreciated.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try each of the channels one at a time.  Make sure they are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• We have just a new wireless modem and I can't print anything of theinternet help

  We recently got windstream to install a new wireless modem/router.  Recently, we have been able to copy items but still cannot print anything on the internet.  We are not so good at such things tech.  Can you please inform us as to fix our problem.  I know this is probably simple, but don't know how to fix it.

  Why not!  It cannot be that difficult.

  What is an IP address and where to get it HERE goto?

  DE-wrote:

  We recently got windstream to install a new wireless modem/router.  Recently, we have been able to copy items but still cannot print anything on the internet.  We are not so good at such things tech.  Can you please inform us as to fix our problem.  I know this is probably simple, but don't know how to fix it.

• No driver found for the new USB drives don't. No problem with the devices previously used.

  Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

  The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

  I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

  Windows 7 32 bit.

  Kind regards

  Check if you have limited the available somehow drives... possibly VMWare has reserved
  the drive letters. Best is to check with the VMWare Support and forums.

  Look in Windows disk management and see if something is there.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.

• I accidentally deleted the windows installation program and I am unable to install new programs

  Original title: windows setup

  I accidentally deleted the windows installation program and I am unable to install new programs. Is there one solution other than reinstalling windows?

  Please start the prompt with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  CFS was able to reinstall Microsoft Installer?

  Best regards
  Amdre

  [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  [2] http://support.microsoft.com/kb/929833 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I'm unable to install the software on my new Surface RT nook study to access a manual

  I'm unable to install the software on my new Surface RT nook study to access a manual while I'll be away next week.

  "Nook" is in the Windows store, but not 'study of the corner. " Is there a work around to read my etext on my RT? I'm willing to try anything.

  Original title: nook survey application

  Microsoft them does not limit in any way: Nook is absolutely free to provide the study Nook Windows program, and encourage Microsoft to do.

• I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.

  I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html