Re - install xp fails, the error code 1722

Similar Questions

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• Update of security of Silverlight won ' t install. Get the error code 0 x 656 when attempting to do.

  This is updated from Windows.  I was told the need update on a problem of security with Silverlight, then went for it and the installation to fail.  Said that the error code is 0 x 656.

  The search for a solution, I'm done on the page of Fixit which is supposed to automatically fix the problem.  Now the installation initializes, but that's all.  Still will not completely install.

  The reference for the problem that FixIt is supposed to fix is:

  Article ID: 943144 - last review: August 25, 2011 - revision: 13.0

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  I'm not if yes or no I installed SP3 without having to restart after installing SP2, this is what is meant by 'immediately' in the title of the article above.

  Will you restart and try again.

  Help!

  Hello

  Silverlight security are what update you referring? You can check the number of KB in the history of the update.

  Measures to ensure update history:

  1. click on Start, click all programsand then click Windows Update or Microsoft Update.

  2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Cannot install updated, get the error code 643

  Update Vista is a failure.  Get the error code 643

  Error 643:

  http://support.Microsoft.com/kb/923100/

  "When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install"1603"

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• Do not install because of the error Code 66 update?

  I tried to install the updates, but one or more do not settle, error Code 66 has

  Frank,

  It helps those answering questions if you provide:

  http://support.Microsoft.com/kb/555375 >

  What updates you trying to install? (Number of KB)

  See Diana / of Andre.Ziegler or respond to a post above about the error code:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3 >

  29/04 / 1112:51: 24 pm

• Update for Windows 8 (KB2822241) fails to install and has the error Code 800703F1

  Greetings. My system Windows 8 found a major update, but it cannot install it. The update is called "Update for Windows 8 (KB2822241)." I try to install it and it installs and I see a screen that says:
  ________________________________
  Some updates have not been installed.

  Failed: 1 update
  Examine the important updates

  Error (s) found:

  Code 800703F1 Windows Update has encountered a problem. Get help with this error
  ________________________________

  From there, I have the option to 'Try again', but when I try I always get the same result (error 800703F1). I already tried the Windows Update troubleshooting tool and whenever I run that he finds two problems and offers correct: "Repair Windows Update Database Corruption" and "repair the Windows Update components. I had it apply these patches every time, but the problem persists.

  I read about this setting by using the function "sfc/scannow", but oddly, when I try even in an elevated command prompt he also fails. It scans absolutely nothing and says: "Windows Resource Protection could not perform the requested operation."
  The 'Windows Modules Installer"service is set to"Manual"and runs, as I read it is necessary.

  What is really weird, is that in my list of installed updates, KB2822241 stands as one of the updates already installed with the name of "update for Microsoft Windows" (instead of "update for Windows 8"as one continues to try to install my PC), and when I run the independent for this update installer (I downloaded from the web site of Microsoft to try it) the installation program indicates the update is already installed, and it closes. This gave me the idea that maybe my PC is confusing one update for the other. After all, why he would find KB2822241 as an important update that it needs if it is already installed?

  I know that I can normally solve the problem of update and the question of the SFC by resetting or refresh my PC via built-in tools of Windows 8, but I don't want to go through that, unless it's the only solution. System Restore didn't help, but it is an opportunity to reinstall some other updates.

  As it is, then, the problems persist: "Update for Windows 8 (KB2822241)" settles "sfc/scannow" cannot perform the operation and not I ask.

  For the record, my machine is a 900 Asus EeePC ha with an Intel Atom N270 CPU, 2 GB of RAM, and it is running 32-bit Windows 8.

  I'd appreciate any help on this matter. Thank you in advance.

  Hi Michael,

  You can follow this link if you want to refresh your computer.

  How to restore, refresh or reset your PC

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Thank you.

• Vista - Windows update fails, the error code 646

  My windows update failed code 646

  My windows update failed code 646

  Hey wagmalik

  Microsoft gave advice about your error code 646 in the microsoft below link

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• running Windows 7 have seven important updates for microsoft office 2003 won't install because of the error code 646

  running Windows 7 to have seven important updates for microsoft office 2003 that none will install due to error 646 code can't find a simple forum solution... can anyone help?

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatic Microsoft Fix it 50461 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/2258121>

  Please let us know if that helps.

• Cannot install software — get the error code 1618

  I install software error code 1618 already running when I try to install software.  There is not any other system running.  However, when I look at taskmgr, I see 2 instances of msiexec running.  I was advised to cancel their but they restart immediately.  Any ideas?  Thank you.

  Hi Horselover,

  Thanks for posting in the Microsoft community! You have reached the right forum for your question.

  You did changes to the computer before the show?

  Method 1
  I suggest you to restart the computer, and then perform the clean boot and install the programs and see if that helps.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 2
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• KB2656353 & KB265637 try several time to install and get the error code 643

  Original title: several attempts but will not install updates

  KB2656353 & KB2656370 security updates will not be installed. I have made several attempts to install & they will not. I ran the Windows Fix It to fix any problem & he says that it correct. But again, try to install & it does NOT install these two.  It also has a Code 643 showing thereon.

  Try to download and install them manually.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29364

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28575

  To solve the problem check this article

  http://support.Microsoft.com/kb/976982/en-us

  or

  Try to repair the .NET Framework.

  Click on Start > control Panle > programs and features find offshore Microsoft .NET , click Uninstall/change , and fix it. Then try to install the updates.

  If again get the error follow the steps below

  1 - Download .NET Framework cleanup tool http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip and unzip it.

  2. After you have retrieved double click it to open it

  3. in product cleaning select all versions , and then clickclean now

  4 - restart your PC after cleaning ends.

  5. download and install the suite

  Microsoft .NET Framework 3.5 Service Pack 1

  Microsoft .NET Framework 1.1 Service Pack 1

  Microsoft .NET Framework Version 1.1 redistributable package

  Restart your PC and run Windows Update.

  Hope this helps,

• Photoshop will not install I get the error code 6

  cc of Photoshop will not install. arrives at 83% and error code message 6

  Photoshop has been around for 25 years. What version, what platform, an operating system that you are using. You can't wait for an answer unless you think more about your question

• I tried reloading fsx and got the error code 1722,

  I ran reset tool (928080) there no helpI still had 1722. It rolled back and gave error 1603. Error 1722 and this problem with this windows package install. Program run as part of the Setup program has not finished as expected. error 1603 says fatal error during the instullation.       L.P. grounded

  system: Microsoft Windows xp
  Home Edition
  Version 2002
  Service Pack 3
  Computer: Intel Pentium 4 3.20 Ghz (2 processors)
  1.00 GB of ram
  Video card: Nvidia Ge Force 6800

  Sound card: Creative SB Audigy 2 zs (wdm)

  Thank you

  Hello

  I think that the clean boot should help you, try to make the clean boot and check.

  http://support.Microsoft.com/?ID=929135

  Jackson

• Error code 1722 unable to re - install FSX

  Since uninstall Flight Simulator X, I have been unable to re - install.  Receive the error Code 1722.  How can I fix this error?

  Hello

  (1) windows operating system you are using?

  See the article below:

  Error 1722 when reinstalling Flight Simulator X

  http://support.Microsoft.com/kb/928080

• Error code 1722 (Java) and error code 3 (install the update)

  At one point recently not after an installation I know all that I tried to download and install, downloaded but strict install.  Several companies, same result.

  Davo4077,

  This is the help page Java regarding the error code 1722 with instructions on how to solve the problem:

  http://www.Java.com/en/download/help/error_1722.XML

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.