re-installed vista

Similar Questions

• Impossible to install Vista on my Toshiba NB250 - 10G

  Hello. Toshiba NB250-G, part No. PLL2XE-001001EN origin with win 7 32 bit.

  I try to install Vista for compatibility with the family machines. The installation proceeds to the collection of files and then stops with the following message appears:-error code 0 x 80070070 Windows cannot copy files required for installation etc etc. I suspect that the need for a pilot to precede the windows files.

  Can someone help me, please?
  T I J

  Hello

  I checked the Toshiba download page, and as I can see your machine is not supported for Vista. It relies for Win7 32-bit only, so, in my opinion, it would be better to stay with Win7.
  I don't know what kind of compatibility is important to you, but there is not much difference between Vista and Win7.

  I assume that you have created the bootable USB key with Vista. Start the Vista installation wizard is recognized correctly HDD? You can create or choose the partition where the OS is to be installed?

• New HARD drive installed Vista 32 bit, but need drivers for Satellite Pro A300-1MC

  "Because my recovery disks that I made 3 years ago does not, I just installed Vista 32 bit and then on the Toshiba site, where I have downloaded all the drivers available for my laptop (a Satellite Pro A300-1MC) on a USB key (that I don't have a driver to connect to broadband on my laptop) and when I tried to open on my laptop a message comes up saying" Please insert the last disk of all selfextracting and click OK to continue. "

  So what I do now?
  Thank you

  Sounds like you have enabled autoplay
  Whenever you insert the memory key USB flash it will try and read the contents of the files on it.
  You can disable this by holding SHIFT when you insert the USB key.
  This should disable the AutoPlay option.
  Then you can go to MY computer in order to access the USB key.

  Note: pilots are zipped so you will need to decompress the content first, I installed a 3rd third party tool called WinRAR to unpack the packages unique.

• To install Vista on Satellite M60

  Is that what anyone has experienced hardware problems during the installation of Vista on the laptop above. I have already increased the RAM to 2 GB, which is the maximum.

  I'm sitting looking at a copy of Vista and do not know to install on my laptop or home built PC, Help!

  Thank you

  Hello amber

  If I remember well satellite M60 is not portable to Vista and there may be a bit more problematic with Vista support. I imagine that you will have problems because of incompatible BIOS version, but you can check your hardware using Windows Vista Upgrade Advisor. You can find it HERE

  Please use it and see the hardware compatibility report.

  Just for example: I managed to install Vista on Satellite M70. It is also portable to Vista but Vista works well.

• Satellite U200-141: problem with drivers after installing Vista

  Hi all

  I just installed Windows Vista, and I'm having some problems:

  1. shortcut keys do not work (Fn + F1, f2, f3, etc does not at all).

  2 Touchpad - I have already installed driver listed it under Vista, but although I can use the touchpad, normally when you point, rattling, etc., I can't scroll. I mean, I can't set up the scroll area (it has been the right corner to scroll vertically and bottom to scroll horizontally). I checked the options of auto-scroll on IE and Firefox, and it does not work here.

  3. I don't seem to be able to install the new BIOS.

  4. the internet, play, pause, stop, etc., (embedded) buttons do not work either.

  5. I have the product recovery CD but this is for Windows XP and I don't know how to install the drivers to go from there.

  I'd appreciate any help anyone could provide.
  Thank you.

  You cannot use the notebook unique features because you have not installed the drivers VISTA required.
  And you can not install Vista drivers Vista drivers are not available at this time

  So what to do? Either you use the Vista without the additional features like buttons etc. or you use the supplied recovery CD and install XP

• Satellite Pro P100: I need to remove some software before installing Vista

  My Satellite Pro P100 needs the following software uninstalled before installing Vista: -.
  Norton Internet Security
  Bluetooth Stack for Windows by Toshiba
  ConfigFree

  Toshiba has plans to release a version of Vista the last two?

  Hello

  I put t know that Toshiba exactly, but all the tools and utilities will be available for download after the official launch of Vista.

  A friend of mine told me that it may happen that all software will not be created separately for the facility, but as a set of software. I put t know where he found this info, but let's see how it will work.

  By the way: pile of BT for Vista is available on the Toshiba BT page. Check it out under the http://aps.toshiba-tro.de/bluetooth/

  Good bye

• Can I install Vista on the new hard disk drive recovery?

  Hello

  I'll have to replace the hard drive of my laptop Satellite A 200 and have only a drive with her recovery. I'll be able to install Vista on a new hard drive for him?

  Thank you

  Post edited by: xaver

  Of course, you will be able to do.

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Satellite A100-188: how to install Vista graphics driver?

  I installed Vista Beta 2 and you have downloaded the latest driver ATI Vista Beta 2 with the support of X 1600. But with the ATI X 1600 on the A100-188 the driver won't work. The pilot did not find my X 1600. What can I do?

  Hi soumah

  Thanks for the comments. But please note that this OS is not official on the market and Toshiba recommend to use only the graphics drivers from Toshiba.
  You can use the other drivers but only at your own risk.

• Can I install Vista on Satellite M70-110?

  I have Toshiba M70-110 with windows xp pro and I would like to upgrade system to news - windows vista. I hope it's possible?
  I have more memory ram 1 GB and ati x 700 with ram 126.

  Please write to me is it good to change the system.

  Best regards

  Tom p

  Hello

  I put t see any reasons why it shouldn't have been possible.
  According to your hardware specs the laptop should be able to use the Vista.

  One of my friends is using the M70 and it installed the Vista without any problems.
  Of course, some applications are not running and you will need new drivers, for example the driver WLan.

  In your case, I recommend to create a second partition and install Vista on this partition.
  I did it on my A50. Now I use two operating systems: WinXP on first and Vista on the second partition.

• Who installed Vista Ultimate SB to the Satellite M40

  Is there anyone who have Vista Ultimate installed Satellite M40? I have big problems to install Vista. After that I have disabled the PCMCIA is OK. I'm looking for a new update of the BIOS and the Vista drivers.

  Hello

  I m a M40 owner but I did not install Vista on this unit. I use the XP.
  I have not installed Vista on this unit because according the Toshiba document I found in this forum the Toshiba drivers are not available and I n t think that this driver will be available in the next time, or any time for this series of laptop.

  Is the laptop has Vista capable sticker? I don t think so :(

• Satellite L40: Can I use Toshiba DVD to install Vista on a new HARD drive

  Hi people,

  I'm new to this forum... I don't know that there, can someone advise me.
  I replace my Satellite L40 HDD with a bigger drive, the current is only 80Gig.

  And my question is, can I use my Toshiba recovery Disc to reinstall Vista on the new HARD drive, or is it a hidden partition on the original HARD drive?
  If someone has done this, would appreciate an idiots guide to doing the same thing.

  Cheerzzzzzzzzzzz...

  Dave

  Of course you can do it.
  The DVD of Vista recovery Toshiba help you install Vista, all the drivers Toshiba and tools, and it automatically creates all the partitions.

  So what you have to do is to boot from the recovery DVD and follow the instructions on-screen ;)

  Check it out!

• How to install Vista on Satellite M40

  I have a Satellite Pro M40 and I think to install Vista on it. I have no problem with the development of an operating system on my PC, after many, many times before. but I'm not sure I put it on my M40.
  Can someone give some advice?

  Do I have to reformat the drive M40 first? If so, any reformatting program won't work or can I do it via the recovery disk provided. I am wary about using the recovery disc I do not know what to expect.

  Any help appreciated.

  You can choose several ways of instillation. You can upgrade XP to Vista, you can install the Vista on a second partition or you will overwrite the existing XP.

  If you overwrite the XP Vista will delete all installed applications.
  I recommend you to install Vista on the second partition.
  In this case, you can use the two operating system, XP, and Vista.

  When you start you laptop, you will get a Boot Manager.
  Then you could choose either XP or Vista

  PS: as much as I know many applications is not compatible with Vista, and you will need new versions (if they exist!)
  At the moment no Vista drivers are available for M40 :(

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• Qosmio G20: Cannot install Vista because of lack of RAID drivers

  I just bought a version of Vista Ultimate, but I can't install it because I don't have the drivers Raid and BT. When Toshiba will make available?

  A friend of mine installed Vista on his G30 and he used the RAID to XP or MCE driver.
  It worked! I was also surprised, but he managed to install the Vista on G30.
  I know the G30 is not the same thing as the G20, but you can test

• Qosmio F50: How can I install Vista Business

  Hello!

  I recently bought qosmio f50 and it came with the home edition of vista...

  I need to install Vista professional.
  How can I do?
  I have to format it?
  So how do I install back all the utilities and drivers which it came with?
  I have problems with my laptop if I do this?

  Post edited by: xaralas

  Hello

  The Vista installation is not difficult.
  He just put the Vista disk in the STRANGE and then start from the disc.
  The installation will start automatically.

  But this will format your HARD drive and you will lose your installed Win XP and other files.

  > How can I install back all the utilities and drivers which it came with?
  I guess you have a Toshiba Recovery disk.
  If you want to retrieve the OS installed by Toshiba, then you need to use the Toshiba Recovery for recovery disk.

  PS: what Qosmio F do you have exactly? I ask because 108 F is not known to me