Re: Its operation through speakers Tecra M5 but work with headphones

Similar Questions

• Equium P300: no sound from speakers but work with headphones

  The speakers on my P300 Equium seem to have stopped working?
  I checked the card its an all and them seem to no errors.

  Sound bar at the bottom right to move as it should when I play music, but it just doesn't come out of the speakers.
  However, it does work with headphones.

  Any ideas on how to solve the problem?

  Hello

  Hmm. You can hear the sound using headphones but you can't hear speakers that well it looks really a speaker problem, but it s really strange that both speakers are dead at the same time

  In your case I would remove the sound card driver and would update with that of the European driver Toshiba page.
  Check what's happening after the update

• SA50-532: lost sound in speakers, but work with headphones

  Hello support forum,

  I suddenly lost sound through the speakers. I checked the audio drivers, audio and all controls. He looked at the work, I could not hear the sound, but when I plugged in the headphones, to my surprise, I could hear the sound.

  Please suggest me, what could be the problem behind all this. It is a hardware problem or software problem and how to get out of it.

  Thanks for your help in advance,
  Kind regards
  Kiran

  Hello Kiran

  Not easy to say but I think that there is a hardware problem. All parameters of the volume control affect the speakers and headphones. If the headset works perfectly, I guess there is a problem with the speakers.

  Your device is not old and warranty should still be valid. Contact the customer Service of your country partner and let check the device.

  If you need address check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true.

  Good bye

• I have hp Pavilion 1241ea g6, no noise, but work with external or a helmet

  I use mostly external speakers with me laptop, yesterday I unplug my external speaker, but there is no sound from the internal (on-board) pregnant and my warranty until 12/2012. Please give me a suggestion, or any other solution than what happened with m y laptop (works with headphones)

  HP-Pavilion 1241ea G6

  Windows 7 64 bit

  Sound problem

  Hello

  Try the following.

  First, unplug all external hardware attached to the computer, including your external speakers.

  Then download IDT Audio Setup on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you have now the audio through your internal speakers.

  Kind regards

  DP - K

• Problem with Photos Soft - error message the application built with PhotoLibraryPrivate version 215.65.00 but works with version 209.52.00

  Hello, hope someone can help with my MacBook Pro sluggish.

  I'm in OS X Yosemite 10.10.3 version and tried to upgrade to El Capitan 10.10.5 on a Macbook Pro 13inc mid-2012.  He said it has already downloaded twice, but when I open the software it is still sitting at 10.10.3 without modification, download seems to take a lot of time - been sitting for about 6 hours.

  Now I trying to open the photos app but get the following error coming - the application built with PhotoLibraryPrivate version 215.65.00 but works with version 209.52.00.

  Any advice on what are the options for my new photos app! Have you tried different time machine backups and the computer does not like it either

  Upgrade to El Captain OS X 10.11.2 which includes Photo 1.3

  I have no idea of what you see on "El Capitan 10.10.5" as far as I know is not exiat

  LN

• in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  Perhaps because Acrobat 8 is not compatible with Windows 7 or 10.

  Friday, October 9, 2015 at 22:11, thosdelaney [email protected]>

• IDT Audio Codec time Sound speakers but not with headphones on ENVY DV7 series laptop

  I bought my laptop not more than two months ago. Its perfectly played through my helmet literally the day before yesterday.

  Only two changes have occurred since then, first of all I accidentally plugged my headphones into the external microphone jack, then I updated the 'Music' for Windows 8 PC application.

  After my sound stopped working. I restored my PC to a restore point dated before its no longer works in my helmet, however resonates once again that in my speakers (when my headphones are disconnected). When I plug my headphones, sound no longer plays in my speakers but no sound from my headphones either.

  How can I get audio to play through my headphones?

  Product name and number: Envy of HP dv7 Notebook PC C2h74UAR #ABA

  Operating system: 64-bit Windows 8

  Error message: None

  Changes: 1) update "music" app for Windows 8

  (2) accidentally plugged in headphones and external microphone jack

  Hello

  Try the following.

  First of all, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 8

  When reinstalling, restart the laptop.

  When windows has reloaded, download IDT Audio Installer on the link below and save it in your downloads folder.

  IDT Audio Installer - Windows 8.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio with headphones.

  Kind regards

  DP - K

• Audio works with headphones, but not the speakers

  Hello, I have a DELL XPS17.  The sound works fine with headphones, but no sound when the headphones are disconnected.

  Note that I had the opposite problem (its good speaker, but no helmet) and then updated the driver.  Once the new driver has been installed, the problem was reversed.  Very strange: Pei

  Last driver installed is Audio_RLTK_W7_A05_Setup-J3VMR_ZPE

  Thanks for your help!

  Hello. You can test your speakers by running test audio fast ePSA or PSA tests.

  You can test the audio driver by opting for the native Windows audio driver. If you get the same symptoms with the native driver, then you can exclude a bug in the driver from Realtek. This Realtek driver has been around for awhile now and has no bugs that I know.

  • 1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  • 2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  • 3 Select this option to "Update driver software".
  • 4. click on "Browse my computer for driver software".
  • 5. click on "Let Me pick from a list of drivers on my computer".
  • 6. put the "Show compatible hardware" check box if not already checked.
  • 7. in the list of devices, click on 'High Definition Audio"(native driver).
  • 8. click on "next".
  • 9. in the update driver warning box, click 'Yes' (the driver).
  • 10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  • [To return to the Realtek driver, do it again but reverse steps 2-7 names].

  If the speakers and the driver to pass the tests, you might have failed to sense pin into the headphones Jack, explained in the FAQ of Jack for headphones.

• How to fool a laptop for playing through speakers when it assumes that the headphone is plugged?

  I'm working on fixing the laptop from my friend and I was able to get audio to play through the speakers. The thing is, the headphone jack is loose and the computer requires a pair of headphones are connected. I don't know how I did it, but I want to reproduce it. It would be cool to have this problem for my friend does not have to always use the USB headset.

  Hello

  Thanks for the detailed description of issue.

  Please answer the following question:
  What is the brand and model of the computer?

  We will define the speakers as the default output device and check if it helps.

  Exercise the functions mentioned below to set the speakers as default:
  a. go to Start and click on Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab 'Read' and
  You can search for speakers and right-click in the window and click and click on "Set as default".

  For more information you can consult the Tips for solving common audio problems

  I hope the above information helps!

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Vista Home Premium-printers do not work, but works with XP. HP, Brother printers.

  Printers: HP Deskjet 6127, Brother HL-5140, Brother MFC-240 c worked with XP, but does not work with Vista Home Premium 32 bit. Ready poster printer icon; Test page does not print, and reports the error. All printers are loans. Having exhausted download and without success to restore. I tried MAST. is there a solution to this problem? For each printer?

  Sunday, June 27, 2010, 03:27:46 + 0000, Eugenew wrote:
   
  > Vista requires more to buy new printers? Is this a common slump?
   
   
   
  Whenever you switch to a new version of Windows, you must install
  drivers for printers, scanners, video cards, etc., that have been
  written for this new version of Windows. And also note that you need
  different determinants for a 32-bit version of Windows and a 64-bit
  Version.
   
  It is the manufacturer of the hardware to write and
  available to download these drivers. Especially if your hardware is
  older, it is quite possible that the manufacturer has decided that it is not
  a value of his time and effort to develop drivers for the hardware that it is
  selling more.
   
  Check with the manufacturer or on their web site to see if a pilot
  There are. If not, you're out of luck.
   
  In the future, before making such an upgrade, make sure you have
  done the appropriate research to find out what drivers do not exist,
  and so what equipment you need to replace if you upgrade.
   

  Ken Blake

• Connected to the wired network HPOJ Pro k5400 won't work with Win7x64 PCs but works with a PC Vistax64

  I can't get my wired Ethernet network HPOJ Pro k5400 work with Win7x64 PCs. The printer is correct because it works well with a PC Vistax64. The symptom of the problem is that the first page (or two if duplex) prints OK, but after that, the printer "freezes" and is no longer prints. The power lights and resume both blink simultaneously. The Red print cartridge lights permanently. Turn off the printer and then resets.

  To solve the problem I deleted the printer since the Win7 PC and re-installed, manually and automatically choose the driver. Also, I searched the web without success.

  Any ideas?

  Hello

  Try to select the HP Deskjet 6940 / 6980 as another pilot and check if what it contributes,.

  If you don't find the listed model he wil appear after clicking on Windows Update.

  For duplex printing it can be disabled by default, enter the printer properties > device settings and make sure that the duplexer is set to installed.

  Shlomi

• Cannot see wireless LAN available on Tecra A5 but ok with Tecra M5

  Hello
  I have the following problem:
  I have an access point (DWL-3200AP) DLink wireless set up in my office.
  On my laptop, I can see my WLAN and I'm able to connect with my Tecra M5.
  I can see the WLAN on the tool graph configfree.
  Now the problem... I bougth a Tecra A5 for my boss, everything works well... The radio is active...
  OK wireless card... BUT I don't see the WLAN... can't find it...
  I've checked everything but I do not know why...
  Is someone can help me?
  THX
  Math.

  I suggest you check the settings of the router.
  To my knowledge a lot of WLan routers supports a WLan option cache.
  In this case, the WiFi network is not visible and you must know the name of the WLan to search.
  I think you know the name of the WLan so I recommend entering the wireless network connection properties, and then selecting the wireless networks tab.
  There you can add preferred networks. You must enter the WLan name and encryption.

• The myfitnesspal website is most compatible with you? It will not connect, but works with all other browsers. I did help out. Did not work.

  Yesterday, I had problems with the Myfitnesspal.comwebsite. I have a tab set to open automatically when I start the browser every day. I could not connect any information in the site, so I tried a log off and log in. It doesn't let me log on to the site. I contacted, myfitnesspal and we worked through many steps in troubleshooting. I also tried all the steps of troubleshooting your site. I even made a full stop and start my computer. Nothing has solved this problem. I had the same problem with a couple of store that I like to go. The shop site work finally after more than six months of frustration. Myfitnesspal works on all other browsers. So with everything which has been tried and done, the problem seems to be your side somewhere. I'm running Windows 7 Professional 32 bit.

  I really hope that this could be solved because the site appears better on your browser. If you have any questions, feel free to send me an email.

  Thank you for what you can do about it, and for your time.

  Hello.

  I used to have this problem with Firefox only for some time. I was frustrated beyond. MyFitnessPal is 100% compatible with Firefox, however, some extension (type of) can cause significant headaches. I hope that this fix also helps.

  Do you by chance the https everywhere extension installed? It's a great add-on and I strongly recommend using it, however, unless you "disable" its use with MyFitnessPal, you will not be able to connect to your account, add food, weight update, see graphics, etc..

  So don't panic. Your question is likely to be what I had as well. I just went in the https everywhere extension and where it says "MyFitnessPal" with a checkmark (saying it is ACTIVE for the site), I simply clicked to disable the add-on for a site.

  Simple and it works instantly. I hope it does for you too! If you do not have this add-on so it is probably related to some thing similar so good luck to you!

  D

• Battlelog Plugin does not work with every night but works with other browsers!

  Hello, I use the latest nightly and each time I want to play battlefield 4 in multiplayer it forces me to install the latest plugin from battle, a few days ago there was no problem and I could run the game after you have installed the plugin but now even if the plugin appears in the add tab and I always leave work it still says its has not been and I need to Download and install so that when I have my default browser IE value I could very easily run without a problem so I can tell the plugin isn't the problem, but there may be some problems with the nightly version that may be incompatible.

  Unless you are intentionally 'testing' the Nightly version, and are familiar with Bugzilla, and Bug reporting, you should not use every night. Nightly receives updates almost daily and it may be unstable for days at a time as Bugs are fixed, new code added to test and code is corrected for additional work. Nightgown is the first of the 2 Alpha stages of development process.