Re: LCD TV remote No. 40BV701B to press OK

Similar Questions

• Siri does not not on Apple TV remote

  I bought an Apple TV (4th gen) on the release and everything worked perfectly.  A few days earlier, Siri has stopped working on the remote control.  I press the button Siri, it appears on the screen, but it does not recognize my voice commands.  It's as if the microphone is not working.  I have reset the device and the remote, but no change.  Any thoughts?

  Check if you have the function of zoom accessibility enabled in your settings, this is known to stop siri works correctly.

• Remote control - top left button?

  What does the upper left button on the IR remote control? I press and nothing happens * shrug *.

  Hi gidat

  the left button would initiate in webtop or dock HD entertainment center.

• Hi all. Could someone tell me how to turn off and turn on the CISCO 52 "LCD control using RS232 to play in the future

  Hello

  Im working in Cisco DMS & IPTV.

  IM facing a problem with 4400 DMP & 5.2.2 DMM.

  I want to control CISCO 52 inch LCD using the 4400 G DMP. I am able to power on LCD screens remotely through the DMM off. Also, I am able to schedule for turning off the voltage & power on the LCD for a short number of days as for 3 or 4 days.

  but I can't program it to play in the future for a month.

  My requirement is this: I want to turn off the LCD screen during the downtime in my office to customers. I want to plan the screen to running from 07:00 to 18:00 I want to turn on my LCD from 18:00 to 06:00. I want to this appendix for 1 or 2 months of long in one fell swoop.

  good answer as soon as possible.

  Hello Peter,.

  You will need to add 2 separate events in the appropriate groups of dmp.

  You need to power the LCD screen will be to be repeated on a daily basis with the desired stop time.

  The second will be for LCD power supply using the same methodology as the first.

  The catch here, what if your client's Office is open only 5 or 6 days a week, you need to define the events above for each work day, BUT each event must be repeated in every week (not every day).

• Shutdown options of Windows 8 Remote Desktop session are maddening

  Hi, for windows 8.1 pro via a remote desktop session

  Press 'windows key' + 'X '.

  In the context menu, click "Shut down or signout.

  In the submenu, click on "stop" or "restart" or "sleep"...

  Hi, for windows 8.1 pro via a remote desktop session

  Press 'windows key' + 'X '.

  In the context menu, click "Shut down or signout.

  In the submenu, click on "stop" or "restart" or "sleep"...

  I use Pro 8.1 and I'm sorry but stopping and restarting do NOT appear when connected via a RDP session and you click on the key Windows + X (or right click on Start).  The options you get are (ironically) "stop or d├⌐connexion" > "Disconnect" or "disconnect".

  

• Investigation of Toshiba TL938 service menu

  Hello

  I just bought TL938 TV. It was the last in the store and worked as a sample.
  Is there a way to check its hours of service? I believe that in the menu service should have such an option, judging from my old Samsung LCD TV. Thanks in advance.

  I can't speak from personal experience, because I have not used the service mode. I found two informal sources (but what TV manufacturer makes public access to service mode?) who seem to be Concord on this method:

  _I. Toshiba LCD Service Menu Code_

  1. press the {MENU} button on the remote control.
  2. turn on the icon 'picture '.
  3. press the {9} {3} {0} {1} on the remote control buttons.
  The Service Menu appears with the following Modes:
  'Options' - 'adjustments' - 'Selections '.
  4. use the {OK} button to access and navigate between these Modes
  5. to change the use of values {FLIGHT +} {(VOL-) {P} + {P}-}
  6. to exit, press {MENU} button.

  http://tvservicemenu.blogspot.ro/2011/06/LCD-Toshiba-TV-service-menu.html
  http://factory-reset.com/wiki/Toshiba_Service_Menu

  II. Another (?) way: how to access to a Toshiba Service Menu_

  1. turn on the Toshiba TV. You can either press the button on the remote control or the button on the remote control itself.
  2. press the "Mute" button on the remote three times.
  3. press "Mute" again and hold, then press the "Menu" button on the side of the TV.
  4. release both buttons together at the same time. You will see a ' happen on the television screen.
  5. press on the "Menu" key once more on the side of the TV. You will now be in Mode 'Service' of the Toshiba television.

  http://www.ehow.com/how_7158562_access-Toshiba-service-menu.html

  What I haven't lived successfully on my TL938, however, is the so-called "clone mode" when you use 'Toshiba Channel Editor' request for official sources:
  http://www.Toshiba-OM.NET/firmware.php
  I followed the instructions according to the PDF ' ToshibaEdit Quick-English manual ' downloaded from here:
  http://portalcp.toshiba-tro.de/documents/10781/6dd55351-6749-41e7-8d21-cb5b8b7b07f9

  _Enter Mode_ TV Clone:

  1. press on "MUTE" on the remote control.
  2. press on "MUTE" again and keep holding down.
  02:03 press "VOL -" button direct control TV
  (depending on your model, this can be either a button key or a front sensor side)
  4. the Clone Mode will be displayed.
  5. Select 'TV USB' or 'USB to TV '.

• NB100 XP & - cannot install the utility of keyboard shortcuts

  Hi guys...

  I buy a NB100-11R and I installed xp on it... all is ok, but...
  The only problem is with the utility of keyboard shortcuts...
  I can not install it... installation start-up and stop in a few seconds without evaluating or popup messages.

  Special keys are... half of work... the "F2", A, S, esc and F12 are works not... the key F8 seems functional (I see in system preferences that alter the frequency but the * icon fan that will gray or white * is not like the other icons)

  Some ideas?

  TNX! and have a nice day.

  Hello

  According to the info (more info) on the Toshiba European page the Hotkey Utility allows you to display on screen LCD LCD + CRT or CRT mode by pressing Fn + F5.

  I'm not very well if you'll be able to use all THE FN buttons m description indicates that the driver allows the use of the Fn + F5 keys.

  However, make sure your Windows XP is up to date (all service packs and patches are installed) and try to reinstall the Hotkey Utility again.

  By the way; on the page, you will find the latest version of the BIOS. Make sure that if your computer is already using the latest BIOS

• HP photosmart 7510 c311: HP 7510 c311 0xb893ec4c error code

  After a while, on the printer indicates: printer error 0:0xb893ec4c on the LCD screen.

  If I press the power button it turns off properly.

  The printer's wireless network.

  Note: up to yesterday the printer work good...

  can someone help me please...

  Greetings @HP7510c311,

• Satellite U200 with Win XP - utility to change device display does not work

  Hello

  I think there was nothing wrong with its installation since I encounter the same problem.

  New installation of win XP on a satellite U200 Pro.
  Windows XP Home edition upgrade to sp3 immediately. Then downloaded all the drivers based on serial number of the toshiba Web site and then installed in the same order as shown in the list of installation but I get the same error as sjoemie1 when I tried to install "hotkey to display" etc.

  SOMEONE KNOWS HOW TO REINSTALL THESE TWO FILES?

  Hello

  The v6.05.00 of the common Modules for Win XP should be installed in the first place.

  In addition, there are two tools called

  * Utility Hotkey to display v3.4.4.1 - XP devices *.

  and

  * View edit the v2.3.0.0 device *.

  The two part of the software allows you to display on screen LCD LCD + CRT or CRT mode by pressing Fn + F5

  So if you have problems to install the first utility, forget it and try another.

• Overscan disabled when using an HDMI cable

  Then for a while now, I use my laptop computer while it is plugged into my TV. But the parts of the screen are cut (top, left, right and bottom, which makes no sense since there is no reason to cut the sides) I've seen guides tell you how to disable overscan in the video card settings or in regedit, but the thing is, I don't HAVE a VIDEO CARD. Online guides assume that you have one, but I don't have my laptop is as clear as possible. How can I disable overscan (if possible)?

  I have searched through my TV settings but found nohting even remotely associated with overscan settings.

  I have a hp pavilion 15-n221sa running windows 8.1 and I try to get the display to work on a samsung le46b650 tv.

  Hello

  The overscan problem is TV, NOT computer. You still have the manual? Please check or try:

  • Turn on your TV high-definition Samsung set using its remote control.
  • Press the 'Photo' of your Samsung remote control button once. This will change the aspect ratio of the image that is displayed on the screen. This will also allow you to see all of the different modes of 'Photo' that are offered to you on your Samsung TV. For example, the 'Full' image mode displays the image in full screen and you will find all of the image, including the parts usually cut by overscan. The "Stretch" image mode stretches horizontally an image composed for an old TV, square to fill all of your rectangular form Samsung TV screen.
  • Continue to press the remote control 'Photo' button until the selected picture mode is one you're satisfied. Then, press "Exit" on your remote control to exit the on-screen menu system and return to watch TV.

  Kind regards.

• Black screen after logo at startup

  I have a HP laptop (G72-B66US) running on 64-bit Windows 7 Home Premium. Since I bought a year ago, it had been working fine, until one day he could not boot to Windows, leaving only a cursor flashing in the upper right of a screen LCD otherwise empty.

  By pressing ESC before the end of the HP logo screen, I am able to access a Boot Menu:

  F1 system information
  F2 System Diagnostics
  F9 boot device Options
  F10 BIOS Setup
  F11 recovery system

  ENTER - continue starting

  Various tests (HARD drive, memory, etc.) provided in the diagnostic system (F2) all completed successfully.

  Also, I have started from a repair disc and ran Windows tool Startup Repair Tool, that is no problem.

  I even restored a system image I created just after the purchase of the laptop, but the problem persists.

  A hard reset after the removal of the battery did not help.

  There are two things that I was not able to do, however:

  1. I connected to an external monitor to the laptop, but the screen does not switch to the external display, even after I pressed F4 repeatedly. Same result with fn + F4.

  2. press F8 at any stage of the commissioning is a not get into Mode Windows safe. Same result with fn + F8.

  I wonder if the two functions are disabled somehow by the HP Boot Menu, otherwise why they don't appear as options in the menu?

  In any case, any suggestions on how to proceed from here?

  Hello

  Boot from the rescue/repair CD you have, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• I have put in place for the double sided copies on Canon Pixma MX 922? Thank you

  Hello

  How can I get my Canon MX 922 to make double sided copies?  Thank you

  Wish they offered an instruction manual...

  Chrismiss56

  Hi chrismiss56,

  To copy both sides of the page, please select your PIXMA MX922 and follow these steps:

  1. press the button COPY.

  2. load the paper you want to print on in your PIXMA MX922.

  3. load the original document on the glass exhibition or in the ADF.

  4. press on the right-hand (under Print on the LCD settings) button.

  5. press up or down arrow select-sidedPrintSetting 2 ot.

  6. press on the arrow right or left to select 2 sides.

  7. press the button color for color copying, or the black button in black & white copy.

  Will depend on where you have placed the original, additional screens will be displayed.  Follow the prompts to complete the copy.

• Canon 6 d not focus or flash in ' Live view '.

  My Canon 6 d not focus or flash in ' Live view '.  I have a canon 430ex II and an E - ttl flash with a sync for the function E - ttl cable.  The camera to simulate the action of the shutter, but no picture is taken.  How can I overcome this problem.

  From time to time, after trying to take several pictures, it will begin to work, but usually isn't.

  Hey Shadowcat.

  Thanks for posting.

  It seems that the AF method is set in fast Mode.  When the device is set for Live View shooting, there are different methods of AF that can be set.  In fast Mode, the device uses the AF sensor dedicated to focus when you press the shutter button halfway.

  The image on the LCD is stopped while the camera tries to focus because the shutter closes and the mirror falls on the image sensor.  It may seem as if the camera is taken a picture, but this isn't, it focuses only.  No flash is triggered during this process either.  Continue to hold the shutter halfway button until the focus is reached, how the image will be back on the LCD screen.  Then you can press the shutter button the rest of the way down to take the picture.  The flash fires and the image will be saved.

  This has not answered your question? Find more help contact us.

• N500 BIOS update of brightness adjustment stuck

  I have a n500 4233-hg running windows xp and updated the bios from 6get17ww to 6get18ww in order to activate my hdmi port (Yes it has a port hdmi on the left side near vga output). After update hdmi works very well but lcd brightness hotkeys got stuck: by pressing fn + f10 or fn + f11 sails through 14 levels but brightness change only from low to high and again the lowest in the order (level 1 low 2 high level, low lvl3 lvl4 high, low level5 etc.) all Middle States lost... I downgraded to the previous version via the winphlash and tried other versions also backup file but the problem persists; any ideas?

  PS I had the ability to adjust levels of brightness as fair that the machine is switched on (of post); Info: bios version 6get18ww (1.09) bios keyboard this: 6gec19ww (1.08)

  Thank you

  Hey yigit, I found the solution it is a bit strange, but it worked: offline screen and inverter flex-cables from the motherboard, turned on, connected only cables inverter you press the brightness and voila! (switch off cable screen connect put all things together... )

• Restart Windows Server 2003

  Unable to restart Windows Server 2003 remotely. Must physically press F1 to start Windows. How can this be avoided?

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you! Carey Frisch