Re: Need Satellite L30 - 105 Vista - power calibration error - new firmware

Hey guys =)

Ive got a Satellite L30-105 running a Vista 32 bit. And even if I try several different (Imageburn, Nero) burning software, and with the TDK - CD, I get an error in the burning software, saying "power calibration error".

Satellite L30 - 105 (item number PSL33E-02S026N5), use a cd/dvd burner called MAST * a DVD-RAM UJ-850 s

I wonder, can I download and install new drivers for my dvd player?

I will also try to buy this "cleaning-cd", to try to clean the lens. cause I bought the laptop in 2007... then her grandmother as...

But you guys don't have any what could be bad? Is it expensive to get a new cd/dvd drive for this laptop?

Bravo and thank you!

Hello

Power calibration error means that the laser ODD lens cannot calibrate in the right position.
Generally this has nothing to do with a firmware of drive but with the problem of equipment.

In most cases, the CD/DVD drive must be replaced.

I'm not sure how a new CD/DVD drive could be but the fact is that you cannot use any CD/DVD drive
You need a compatible and such disc compatible and taken in charge could be ordered in a local ASP.

welcome them

Tags: Toshiba

Similar Questions

  • Satellite A350-10 b - power calibration error DVD - RW TS-L633A

    I have a problem with recording DVD Toshiba Recovery Disc Creator. I get the message as "an error has occurred in the calibration power" error code: 0E01B5-26-00037304
    Already lost 2 CD and I have no intend more.

    I tried to download the latest firmware, which must have a version of link Samsung SC05: [http://www.samsungodd.com/eng/Firmware/Firmware/Firmware.asp]. I don't understand why Samsung doesn't support the drive installed in a Toshiba laptop.

    When agile Toshiba launches new firmware for TS-L633A?

    Hello

    > I have a problem with recording DVD Toshiba Recovery Disc Creator. I get the message as "an error has occurred in the calibration power" error code: 0E01B5-26-00037304

    This message always, if you try to use fully compatible diskettes.
    It of not always called firmware or defective CD/DVD drive.

    Try to use different drives from different manufacturers.
    I use R TDK (CD and DVD) and I m pleased with most of my devices (CD/DVD drive, stand alone DVD player, PS3, etc) treat this type of disc properly.

    But I had similar problems with other discs...

  • When I try to download a program Satellite L30 - 105 Vista restarts

    Hello
    Every time I try to install a program on my computer, as my printer or I download something, my computer turns off and samekh. Does anyone know how can I stop this?
    Thank you

    Hello

    Could you give more information?

    What operating system is installed on your laptop? What is a name of your laptop?

  • Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

    Hello

    I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

    Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

    Hello

    The CD/DVD drive needs no special drivers!
    Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

    Simply said, the Vista should recognize the drive without any problems.

    A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

    There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
    It of necessary to update the registry entry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    1. click on the start menu.
    2. If it is a Vista machine in the search box type regedit without quotes.
    3. look for the registry key mentioned above.
    4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
    5. restart Windows.
    6 let me know if it works.

  • Satellite L30-105: how to change shared video memory on Vista...

    My question is the same as we can read on this url:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20578

    But the solution only works with windows xp, anyone know a driver version with which the 'frame buffer' tab is present?
    The latest version of the driver is installed on my Satellite L30-105(catalyst 7.6), 128 MB are shared, but 32 will be enough for me.

    Thanks in advance

    Brux

    Post edited by: brux

    Hello

    I think the problem is that Vista graphic driver does not support this option.
    The option described in the in the other thread was available in the argument XPOS.

    But why would you change? On my L30 128 MB shared memory are activated, but the laptop uses only 64 MB if I put t run all applications performance.
    The pilot controls the amount of shared memory automatically.

    You can se under control panel-> display-> advanced settings
    In the map tab, you can see total graphic memory available (in my case 128 MB) and system memory shared (64 MB)

    By the way; I don't think that 32 MB graphics memory may be sufficient if you're running Vista

  • Need all drivers Win XP for Satellite L30-105

    Hello

    I have Satellite L30-105 and I need Windows XP and other graphic sound card drivers

    Thank you and I'm waiting for your answers

    Satellite L30-105 belongs to the series of PSL33E.

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Check this site and you choose the right set. Follow the guide line in the installation instructions and enjoy!

  • Satellite L30-105 Dual Boot with XP Possible

    Hello

    I have a Satellite L30-105, and while I do not particularly like Vista, I need to keep it for various reasons. However, I must also now use the laptop with a piece of hardware (a North G2 synthesizer) who does no Vista drivers.

    So I think the best thing I can do is to create a dual boot system, but a lot of articles on the net say you need from your CD original Vista, and of course the laptop does not come with one.

    So what I want to do possible? And there at - it a guide for how to do this? I have an XP license and the CD that I can use for this.

    Hello

    I installed the XP and Vista on my laptop.
    It was a little difficult because the XP installation crushed the Vista MBR (master boot record) and the Boot Manager.
    But I solved it by using the original CD of Vista. I had to borrow from a friend.

    I booted from CD of Vista and it repaired the Vista Boot Manager.
    Then I installed the tool called EasyBCD and set up the Vistas Boot Manager.

    That helped get XP and Vista on two different partitions.

  • Problems with Benq DC C 700 digital camera on the Satellite L30 105

    Hello

    I have problems with my digital camera when I connect it to my laptop. Whenever I connect the camera to the laptop freezes and gives me the blue screen of death, in other words, the screen you get when a fatal error occurs, and then my laptop must be restarted. If this happens whenever I connect the two.

    I tried the bios update and install the latest orders, but nothing seemed to work. I contacted the support center in Benq and they told me to contact Toshiba as they are sure that the problem is not with the camera. So please someone, if you have any ideas or suggestions or solutions, I'll be happy to hear.

    Thank you!

    Hello

    First of all if you need Toshiba support, you will need to contact Toshiba authorized service partner in your country. This forum here is only a forum for users and you won't find anyone from Toshiba here.

    On the other hand;
    It seems that the Satellite L30-105 has been bundled with Vista. Using this operating system on the L30?
    I read on many problems with the 3rd devices, software, and Windows Vista.

    I put t know what said you, but eventually the software webcam is not 100% compatible with Vista.
    You should know that the BSOD appears if there is a serious hardware problem or software. I don t think that this problem was caused by a hardware issue and so there is only one possibility; software compatibility issues.

    In case you I would update the Vista of the State and I will ask manufacturing webcam if it s 100% compatible with Vista.

    Good luck

  • Power calibration error - Mat * a UJ - 830 s drive Satellite M45

    Hello!

    I have a problem writing files on my carpet * a writer uj-830 s. My laptop is Satellite M45. When I try to burn a CD or DVD in nore or dla, it gives the power calibration error.

    I'm sick and tired of this!
    Can someone help me please?

    Hello

    Power calibration error is known to me and revealer of truth he s just doesn't sound right.
    For the most part, this message appears if the lens of the player is unable to calibrate in the right position.

    The goal must always be calibrated before you start read or write the middle.
    If this procedure fails, the drive is not able to manage the CD or DVD and get the power calibration error.

    Frankly, in most cases, the drive needs to be replaced, because AFAIK this dysfunction is not repairable.

  • Satellite L30-105 does not recognize the 1 GB of additional RAM

    Hi there I hope someone can help me

    I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
    and it's terribly slow with vista, not to mention programs.
    The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

    However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

    The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

    Are limited to only some of the Satellite of RAM?
    The old subjects indicate if kingston does not work try corsair.
    Other topics suggested to change slots
    Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

    Can anyone help? everyone knows about similar problems?

    I will not buy any more RAM to try different brands for the same issue to occur

    Hello

    The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

    > Why the RAM 1 GB module cannot be recognized?
    Perhaps the two modules are not compatible with each other
    I would recommend using two identical modules of the same manufacturing
    I use Kingston modules, they are ok for me

  • Satellite L30-105 - lack of HARD drive connector

    Hello

    just picked up this laptop Satellite L30-105 for his son who had some hard drive purchased.

    I see specs it's a disc sata hard again, but the problem is that the laptop seems to be missing the connector on the hard drive.

    The laptop has just 1 row of holes where the disk sata hard was 2.

    Anyone knows where to buy connector or any help would be great thanks dave.

    You are right.
    The laptop supports SATA 2.5 HARD disk and so you should be able to use a SATA 2.5 HARD.

    I'm not quite sure which adapter is absent, but my 2.5 SATA HDD contains a piece of plastic that is removable
    Maybe you need it however, I think you could ask for except if a mobile technician in downtown or you could order it from a Toshiba authorized service partner in your country.

    Good bye

  • Satellite A50 will record on Dvd, but not on a CD - power calibration error

    My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
    The drive used to save at all!

    --> Power calibration error is a mistake known to me.
    I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
    It is a hardware malfunction and unfortunately nothing :(

    You will need to replace the drive

  • Update of the Satellite L30-105 display pilot

    Could someone give me an idiots guide on how to upgrade a display driver for my Satellite L30 - 105 (PSL33E) Please?

    Laughing out loud. You need a guide to the fool? Come on man ;)
    OK, here is my guide;

    Download the graphics driver for your model of laptop.
    Unzip the package.
    Access to the Device Manager, then mark the graphics card driver update.
    Then a new window will open.
    You must use the second advanced option.
    Then choose the option called Don t research. I will choose the driver (or something like that)
    Point to the place where the driver package was stored on the HARD disk and complete the installation.

    Welcome them

  • Satellite L30-105: an Intel Pentium Dual Core slogan says, but I have Celeron

    Hello

    My machine has an Intel pentium, near the touchpad sticker that says "* Pentium Dual Core inside." But then the information system listed my CPU as * Celeron *...

    Have I been duped and is this false advertising?

    Thank you

    Mark

    Hello

    I have goggled a bit and found that this laptop Satellite L30-105 was certainly equipped with the Intel Pentium Dual-Core CPU T2060 1.6 GHz.

    I m similar L30 owner as a second notebook and at first start, I noticed that the Device Manager recognized the incorrect CPU.
    I've simply removed the entry CPU since the Device Manager and rebooted again the Vista again recognized the CPU and advised the right CPU.

    Please check this box. Maybe it helps.

    Greetings

  • Memory not correct system on Satellite L30-105

    I just purcased a Satellite L30-105. It is supposed to be 1024 MB (1 GB) of Ram installed.
    Windows and the BIOS see 894Mb
    In the BIOS it reads memory system: 633 MB
    Extended memory: 894 MB

    Should he not see the complete 1024Mo?
    Can I have a problem with the installed memory?

    Thanks a lot for any advice.

    Hello

    I completely agree with Abe83.
    The graphics card shares memory with the main memory of the laptop and the free difference appears so as a memory system.
    It s nothing unusual and everything is ok with your laptop! Don t worry buddy ;)

Maybe you are looking for

  • IPhone 7 and UConnect

    I have a problem with my bluetooth with my Iphone & and 2016 Jeep Cherokee with the UConnect system.  Can I connect my phone to my bluetooth without problem, but when answering a phone call and the phone it will connect immediately to my laptop.  I c

  • I have two versions of firefox at the same time?

    Hello Probably a stupid question but I have two versions of Firefox on my system at the same time? The reason is add-ons that are not compatible with v4. I wish I could close v4 when I need to use an Add On v3. Thank you.

  • Satellite P20 S303 has a WLAN card already installed?

    I WANT TO KNOW IF THE LAPTOP NAMED ABOVE IS DELIVERED WITH A WLAN CARD IS ALREADY INSTALLED.COS I DON'T SEEM TO FIND ONE ON MY LAPTOP, BUT THE INDICATOR AND SWITCH ARE A MACHINE.

  • Satellite Pro L100 - which hard drive is maximum for this model.

    Dear users, I have a problem with choosing appropriate new HARD drive for this model. I have no idea of this title is to the maximum with what my BIOS will manage. This model, I bought on the year 2006.I would be grateful for any help.

  • HP ENVY m6 (m6-1205dx: wireless card update)

    OK, I bought a wireless card on ebay attesting sound of an HP laptop. I'm a total noob to this, but I catch on fast. Someone I know said make sure that it is supported by your laptop. I listened to and didn't at the same time. I received the card. I