Re: New install of Win7 on Equium P200

Similar Questions

• Cannot install Vista SP1 on Equium P200

  Says Windows installs, then stops, starts to set up, but then returns the changes. Anyone else had similar and then successful problems to install. This on windows vista edition Home premium 32-bit on Equium P200.

  Checked for all the updates on Vista, perfectly up-to-date. Also stop Firewall etc. Can someone help with this problem?

  Hello

  It's funny you say that, because my friend has exactly the same problem as you! (but is not on a laptop, on a standard desktop configuration).

  When the service pack installs it checks for incompatible software during installation. What I would recommend would be to backup your data and install Service Pack 1 _directly_ after recovery of product and then install the 3 rd party software you want to install.

  (Especially the burning of programs/language packs being installed), I found that this has harmed the configuration causing the cancellation of the installation.

  If you give that to try and see what happens and if it doesn't work then come back and we can see what it can be.

  When my friend re-installed Windows and the Service Pack because it worked, allowing him to install its own software on top.

  Installation/Recovery > all Windows updates > Service Pack 1 > 3rd party software

  I hope this helps

  Kind regards
  Nukey

• How to install Win XP on Equium P200

  Hi guys,.

  I found a very useful tutorial, how to install windows xp on laptop Equium P200.
  Problem is that when I did everything what in this tutorial (used nlite, made the install xp with sata drivers cd) Win Xp is show error.

  When you boot from the cd, and all the drivers are loaded, it will show me a blue screen saying that installation was arrested for not to damage my pc and its saying that the error is in the pci.sys file...

  The ides what it could be?

  Thanks in advance

  Hello

  I m not 100% sure why this error but I've had an idea.
  Maybe the installed Intel Matrix Storage Manager doesn t support the good chipset.

  I ve towing different versions of the Intel Matrix Storage Manager and both versions support different chipsets.

  Always is it that there are different series Equium P200 which needs different drivers.
  I think you should visit the European driver Toshiba page and must choose the right notebook series! Compare the serial number located at the bottom of the device!

  Then try the installation again.

• EliteBook 8770w new install of Win7, but the SSD mounted at the front and restore works not

  Hello

  I have a problem...

  I tried to clean my laptop and reinstall Windows 7 Prof

  I bought the laptop with standard HARD disk and a professional editing an SSD immediately. It migrated everything and changed this specific ssd and so on.

  Now, I want to renew the win7, but:

  1. the HP restore does not work. Don't know why?

  2. I want to install a win7 disc now, but where will I get the right drivers and so on?

  How can I do exactly?

  It will work like this:

  (a) install win7 disc

  (b) install hp support assistant

  (c) leave SA HP find all drivers?

  If not, how should I do this? I have all the original HP discs, so I don't know how to get all the necessary drivers for my laptop.

  Thank you very much and best regards,

  Marc

  Hello:

  You can find all the drivers for your model on the link below.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=5257513

  You can try the steps you sketched out, or you can manually install the drivers you need on the Web page above.

• Satellite L650 - 10 h - new install of Win7 can't see HDD

  Hello!

  I have the Satellite L650 - 10H and I want to format it to install WINDOWS 7 ULTIMATE.
  So I tried to format and do a new partition on my hard drive and I used acronis Disk Director 11 and may not see the hard drive!
  Same magic 8 partition or server paragon 10 and no software can see the hard drive!

  In the same way, I tried to make an image on my hard drive and acronis true image 2010 do not.
  Only GHOST15 see the hard drive and make an image, but it can change partitions.

  In the bios I've seen something that maby can do to this problem and in the drivers I have found no update of the bios on this situation.

  important to know that I used acronis disk Director from a boot able disk and paragon Yes and others, but even if some software have the problem with a hard drive, the other read him but here no budy can see!

  so I'm askink what is problem? something in this laptop is different from the others I'm know.what is the sulotion for this problem?

  pls help your young

  Thank you

  Ofek

  Hello

  > important to know I used Director a boot able disk drive acronis and paragon

  Hmmm... Also, I use the paragon 10 Server to create partitions. But why are you trying to create a startup disk? Install the server paragon 10 on your computer, and then make the best partition size.

• missing cd/dvd drivers on the new install of win7

  I have a HP Pavillion H8-1230.  Replaced the hard drive with a new 2 to Seagate.  Tried to make a new, clean installation of Windows 7 Pro but I get an error that says: "a required cd/dvd device driver is missing."  I always thought that basic device drivers have been included in Windows, but I guess I'm wrong.  I can't find this driver anywhere.  My CD/DVD-rom is a DVD SuperMulti of HP GH60L burner. Can someone please help?

  Hello

  Try the following.

  Using another PC, download driver RAID on the following link.

  Storage controller driver - Windows 7 32 bit.

  Storage controller driver - Windows 7 64 bit.

  Then, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right click on the storage controller installation program you download, select Extract 7 - Zip, select the files, and then click Ok.  Copy this file "extract" at the root of a USB or a blank CD key.

  When you get to install error message, plug the USB (if you used a CD, remove the installation disc and insert the CD), and then select the option 'Load the Drivers' - navigate to the location on the CD/USB and load the driver.

  Kind regards

  DP - K

• Satellite C660 PSC0LE update problem - new install of Win7 64 bit-

  Don't know not if someone can help me, but I'm lost the will to live.

  I have this laptop, the operating system damaged and due to a malware infection. I never had the recovery discs, so I clean installed Windows 7 Home Premium 64 bit, twice in the space of 3 days, because every time, Windows Update will not work. It just happens on updates and never ends. I tried EVERY solution course - ive reset update of windows, all done the fix that programs provided by microsoft without success.

  As I said, it is a facility completely clean, no virus, no 3rd party firewall, anti updates tempted via ethernet and wifi. Am I missing a driver any? There is no warning or exclamation points in Device Manager?

  It's my head. What I am doing wrong?

  An observation, both facilities have forced me to activate by phone, it wouldn't do it on the internet? Is this related in any way?

  Drivers installed:
  Chipset
  Video
  Audio
  LAN
  WLAN
  Touchpad

  I got them out of this page: http://www.toshiba.co.uk/innovation/...untry=8&page=1

  Is there anything I'm missing that are important?

  Thanks in advance!

  Dan

  SP1 is already installed on your Windows 7 system?
  Otherwise, you can download this from here:
  http://Windows.Microsoft.com/en-us/w...Service-Pack-1

  Otherwise I recommend checking the knowledge base of MS Windows 7 update issues.

  You do not have "use the image of Toshiba and so it's no problem for laptop Toshiba but system problem."

• How to install Recovery on my Equium P200 1IR image?

  Hello

  I tried in vain to now for quite awhile to recover/restore this Toshiba to factory default as its lag so bad now, anyway after a Google search and the Toshiba site I m in the light of the different ways to make it go was to hit F8 to repair the computer, then check that the default button factory.

  I tried this in admin and the possibility of recovering factory default just wasn t it. There are many other options but none I needed, option 2 I understand is to turn off the pc via the power button for 10 seconds then take 0 key and start (even once, it has been a waste of time: /)

  Please could someone explain why I have no option to recover my Toshiba to default out of the box? I m running Vista Home and model number is pspb5e-005c004ks default it is not not a way of so how much do aprox recovery disks will cost Toshiba direct? Sony tried to charge me £45 for some fo rmy vaio seemed a bit steep for a disc.

  Thanks for reading all the advice is great.

  Hello

  Where to start my friend?
  I put t know for sure, but I assume that your older notebook satellite has been delivered with the recovery of HARD drive image. This means that without support of restore DVD and this recovery image was recorded on the second partition of HARD drive in the folder called HDDRecovery.

  Toshiba has designed reminder which should let know you how important is to create DVDs of recovery that can be used in the case where when recovery of HARD drive option is not available or cannot be launched. The same is also described in user; s guides to document that you have with your laptop.
  It will be interesting to know whether or not you have created this DVD but I n t think so.

  If you do not see this repair my computer option in Advanced options boot (F8) then you have a big problem and you will not be able to start the recovery procedure. I put t know why you got it n t, but especially this option will be untied if you have installed the own operating system or this recovery file is missing.

  If you want factory again, you can order https://backupmedia.toshiba.eu/landing.aspx recovery disk
  It costs a little, but you will get the original recovery image that includes the operating system, all necessary drivers, utility tools and several additional programs and it is designed for your laptop model.

• New install of Win7 Ultimate 64 b on my Satellite C850

  As the topic...
  What is the most relevant drivers to function of the computer?
  [Drivers: http://www.toshiba.se/innovation/download_drivers_bios.jsp?LNG=16&service=ND&selCat e category = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7516 & selShortMod = 3567 & language = 39 & selOS = 30 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & count ry = 36 & page = 1URL]

  Here is the list as drivers and installation order you use:
  Windows 7 Win7
  AMD display driver
  Realtek Audio Driver
  HD SRS Premium Sound Technology
  ATI HDMI Audio Driver
  AMD USB filter driver
  Synaptics Touch Pad Driver
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Bluetooth Stack for Windows by Toshiba
  Realtek driver LAN wireless
  Realtek LAN Driver
  AMD driver xHC
  Realtek card reader
  TOSHIBA Value Added Package
  PatchFiles
  TOSHIBA Web Camera Application

  If you need assistance, you are prompted.

• New install of Win7 on a Vostro 1220

  I am trying to install Win 7 32 on my Vostro 1220 b.

  F12 allows to me select CD/DVD to boot, but he turns just as the DVD for a while and nothing happens.

  Any suggestion?

  I tried also. :-(

  I'll try to make a bootable USB key with Koala and see what happens.

• Install of Win7 64 bit on Tecra M10 - 11V

  I have to update the Bios before a clean install of Win7 64 bit on my Tecra M10 - 11V?

  Should I regularly check and update the Bios?

  After installation the program "Toshiba Software Installer for Windows 7" find and update all the drivers and the necessary utilities?

  Thank you

  In my opinion you should not update BIOS. You have the latest version of BIOS 3.0 installed on your Tecra?

  Can you please tell us what you want to do exactly? You want to upgrade Vista preinstalled or you want to do the new install of Win7? If yes how do you do this? With the help of the Microsoft installation disc?

• How to install Vista Service Pack 1 - Equium P200

  have now tried many times to install the sp1 update. This on Equium P200. update remains in loop and finally returns to disc installinfrom of old settings.tried. This is same, but came with the 0x800f0826 error code. the link that took me to just given microsoft siteand same things to try as before.

  Looking for a not found error code. someone in words can tell me what this code is very simple and then in simple steps how to install the sp1 update. I've been using the automatic update and when checked maually, the only update that has not been installed sp1.

  Try to download the sp1 manually from microsoft.com
  Once you have done so, use a windows account that has administrator rights to install the service pack.

• Hard drive not found - installing WXP on Equium P200

  Dear all

  I have an Equium P200 with Vista. I decided to remove vista and install windows XP. I put the XP and it goes through a verification process, I guess. At the end of the audit and after I pressed the button to install XP, I get the message "hard drive not found on this computer. Help me with as I want to install XP, my laptop?

  Concerning
  REDA

  The XP operating system could not find the HARD drive because you have not installed the Intel Matrix Storage Manager.
  It is a SATA driver is needed t install the XP.

  During the operating system installation process, you will need to press the F6 key to include the external USB FDD drive SATA driver.

  It you don t have a USB FDD drive then nLite software could be a solution.

  PS; Search this forum for similar topics, because this has already been asked several times

• Processor upgrade and Equium P200-1ED

  Hello

  I installed an SSD of 64Go and installed Windows 7 with the user and the data folders program on a SD card installed as USB key into the Expresscard slot. I also put in 4 GB RAM

  It is still slow to navigate the Web through wired Ethernet. So I plan to upgrade the processors as the neck of the bottle seems to be permanently on the processor which is a T2310 Dual Intel @1.46 GHz.

  So the question is what is the next possible CPU upgrade?

  Thank you

  Update CPU has no influence on the Internet.
  It's done.
  If you have a slow internet connection, check the flow of data to your internet provider.

  Regarding the upgrade of CPU:

  Upgrading the CPU is certainly not supported by the laptop manufacturers. But this does not mean that another CPU would not work. A lot of people here in the forum attempted to upgrade the processor and in some cases, it worked.
  It will be important to know which chipset was built in this Equium P200-1ED.

  I m not very well, but I guess that its Intel GL960 Express Chipset. Please correct me if I m wrong the chipset must support the new CPU, otherwise the new processor cannot be used.

  Page Intel ARK provide information on supported processors
  http://Ark.Intel.com/products/29830

  In addition the new processor must be supported by the BIOS. If the BIOS would not support new CPU, the laptop would not start even if the chipset would be compatible with the new processor.

  As you can see, the CPU upgrade isn't easy because of pending issues concerning the compatibility issues between different parts for laptop.

  By the way: I am wondering about the upgrade to 4 GB RAM because this device should support max 2 GB of RAM

• Equium P200 with WXP, no ACPI

  Hello

  I recently bought a new HARD drive to replace the Vista operating system.

  I used nlite to make an iso of the drivers SATA, SP2, and XP Home.
  I installed XP, SP3 and then all the drivers concerned from Toshiba. Especially the PC is fine, but I have a couple questions.

  They are:
  1 button will turn PC on or off, but not shut down the OS before turning off.
  2. when I stop XP I get the message (Win98), "it is now turn off your computer"! (Both of these may be (?) related).
  3. in eating patterns Options\Power I have only the possibility of the turn the HARD drive and monitor and then in the Advanced tab at all no options!
  4. with the exception of point 1 I have no control of the any of the other easy access above the function keys buttons. Toshiba controls are configured but do nothing!

  I studied these problems and it would seem that the APCI perhaps the corupt? I can't find any mention of ACPI in the BIOS (Phoenix V2.3). Also, I can't find any reference to ACPI in including hidden devices Device Manager! It was also suggested to upgrade the BIOS to ACPI compatible version?

  The only clues I can give, is that even if the pilot pwrsav the pwrsav driver installed OK - in twice caused a fatal error (BSOD) on the PC. To restart, as Toshiba Power Saver icon in Control Panel, but the opening gave me a Fatal Exception error message. I then restored the system to remove the program.
  In my opinion that ACPI and energy savings are related, please inform me if I am wrong. (Items 1 to 4 can all be linked)?

  XP has apparently ACPI capabilities but I can't find anything on the PC in this regard.
  With Vista that I had no problem with mentioned previously not mentioned and everything worked perfectly.
  Your help would be much appreciated...

  Hello

  It seems that the Toshiba UE driver page provide a special Win XP BIOS version 5.40 for Equium P200.
  If you are using Win XP, its recommended to use this BIOS.

  In addition, the page provides the pilot Power Saver Power Saver utility for Win XP.
  You must install both have additional food options.

  The commands and controls driver must be installed so that the functionality of the multimedia buttons.
  Hotkey Utility for Win XP manages the FN keys.